You are here: irt.org | RFCs | RFC6475 [ previous next ]
Internet Engineering Task Force (IETF) G. Keeni Request for Comments: 6475 Cyber Solutions, Inc. Category: Standards Track K. Koide ISSN: 2070-1721 KDDI Corporation S. Gundavelli Cisco R. Wakikawa Toyota ITC May 2012 Proxy Mobile IPv6 Management Information Base Abstract This memo defines a portion of the Proxy Mobile IPv6 Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, the Proxy Mobile IPv6 MIB can be used to monitor and control the mobile access gateway (MAG) and the local mobility anchor (LMA) functions of a Proxy Mobile IPv6 (PMIPv6) entity. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6475. Keeni, et al. Standards Track [Page 1]
RFC 6475 PMIPV6-MIB May 2012 Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. The Internet-Standard Management Framework ......................3 2. Overview ........................................................3 2.1. The Proxy Mobile IPv6 Protocol Entities ....................3 2.2. Terminology ................................................4 3. Proxy Mobile IPv6 Monitoring and Control Requirements ...........4 4. MIB Design ......................................................4 4.1. Textual Conventions ........................................6 5. MIB Definitions .................................................6 5.1. Proxy Mobile IPv6 Textual Conventions MIB ..................6 5.2. The Proxy Mobile IPv6 MIB .................................10 6. Security Considerations ........................................58 7. IANA Considerations ............................................60 8. References .....................................................60 8.1. Normative References ......................................60 8.2. Informative References ....................................61 9. Acknowledgements ...............................................62 Keeni, et al. Standards Track [Page 2]
RFC 6475 PMIPV6-MIB May 2012 1. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 2. Overview 2.1. The Proxy Mobile IPv6 Protocol Entities Proxy Mobile IPv6 (PMIPv6) [RFC5213] is an extension to the Mobile IPv6 (MIPv6) protocol that facilitates network-based localized mobility management (NETLMM) for IPv6 nodes in a PMIPv6 domain. There are three types of entities envisaged by the PMIPv6 protocol. mobile node (MN): In the PMIPv6 context, this term is used to refer to an IP host or router whose mobility is managed by the network. local mobility anchor (LMA): Local Mobility Anchor is the home agent for the mobile node in a Proxy Mobile IPv6 domain. It is the topological anchor point for the mobile node's home network prefix(es) and is the entity that manages the mobile node's binding state. The local mobility anchor has the functional capabilities of a home agent as defined in the Mobile IPv6 base specification [RFC6275] with the additional capabilities required for supporting the Proxy Mobile IPv6 protocol as defined in the PMIPv6 specification [RFC5213]. mobile access gateway (MAG): Mobile Access Gateway is the entity on an access router that manages the mobility-related signaling for a mobile node that is attached to its access link. It is responsible for tracking the mobile node's movements to and from the access link and for signaling the mobile node's local mobility anchor. This document defines a set of managed objects (MOs) that can be used to monitor and control PMIPv6 entities. Keeni, et al. Standards Track [Page 3]
RFC 6475 PMIPV6-MIB May 2012 2.2. Terminology The terminology used in this document is consistent with the definitions used in the Mobile IPv6 protocol specification [RFC6275] and in the NETLMM goals document [RFC4831]. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119]. 3. Proxy Mobile IPv6 Monitoring and Control Requirements For managing a PMIPv6 entity, it is necessary to monitor the following: o capabilities of PMIPv6 entities o signaling traffic due to PMIPv6 signaling o binding-related details (at LMA and MAG) o binding-related statistics (at LMA and MAG) 4. MIB Design The basic principle has been to keep the MIB as simple as possible and, at the same time, to make it effective enough so that the essential needs of monitoring and control are met. The Proxy Mobile IPv6 Management Information Base (PMIPV6-MIB) extends the Mobile IPv6 Management Information Base (MIPV6-MIB) [RFC4295]. It is assumed that PMIPV6-MIB will always be implemented in conjunction with the MOBILEIPV6-MIB [RFC4295]. The PMIPV6-MIB uses the textual conventions defined in the INET-ADDRESS-MIB [RFC4001] and IP-MIB [RFC4293]. The PMIPV6-MIB is composed of the following groups of definitions: - pmip6Core: a generic group containing objects that are common to all the Proxy Mobile IPv6 entities. Objects belonging to this group will be implemented on the corresponding Proxy Mobile IPv6 entity. pmip6BindingCacheTable belongs to this group. - pmip6Mag: this group models the mobile access gateway service. Objects belonging to this group have the "pmip6Mag" prefix and will be implemented on the corresponding MAG. - pmip6Lma: this group models the local mobility anchor service. Objects belonging to this group have the "pmip6Lma" prefix and will be implemented on the corresponding LMA. Keeni, et al. Standards Track [Page 4]
RFC 6475 PMIPV6-MIB May 2012 - pmip6Notifications: defines the set of notifications that will be used to asynchronously monitor the Proxy Mobile IPv6 entities. The tables contained in the above groups are as follows: - pmip6BindingCacheTable: models the Binding Cache on the local mobility anchor. - pmip6MagProxyCOATable: models the Proxy Care-of Addresses configured on the egress interfaces of the mobile access gateway. - pmip6MagMnIdentifierTable: provides a mapping from the MAG- internal pmip6MagMnIndex to the mobile node identifier. - pmip6MagMnLLIdentifierTable: provides a mapping from the MAG- internal pmip6MagMnLLIndex to the corresponding interface of the mobile node link-layer identifier. - pmip6MagHomeNetworkPrefixTable: contains the home network prefixes assigned to interfaces of all mobile nodes attached to the MAG. Each interface is distinguished by the attached mobile node identifier (MN-Identifier) and the link-layer identifier (MN-LL-Identifier). - pmip6MagBLTable: models the Binding Update List (BL) that includes PMIPv6-related information and is maintained by the mobile access gateway. - pmip6MagMnProfileTable: contains the mobile node's policy profile that includes the essential operational parameters that are required by the network entities for managing the mobile node's mobility service. - pmip6LmaLMAATable: contains the LMA Addresses (LMAAs) that are configured on the local mobility anchor. Each LMA Address acts as a transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway. - pmip6LmaMnIdentifierTable: provides a mapping from the LMA- internal pmip6BindingMnIndex to the mobile node identifier. - pmip6LmaMnLLIdentifierTable: provides a mapping from the LMA- internal pmip6BindingMnLLIndex to the corresponding interface of the mobile node link-layer identifier. Keeni, et al. Standards Track [Page 5]
RFC 6475 PMIPV6-MIB May 2012 - pmip6LmaHomeNetworkPrefixTable: contains the list of home network prefixes assigned to the connected interfaces of the mobile nodes anchored on an LMA. 4.1. Textual Conventions A Proxy Mobile IPv6 Textual Conventions MIB module containing Textual Conventions to represent commonly used Proxy Mobile IPv6 management information is defined. The intent is that these TEXTUAL CONVENTIONS (TCs) will be imported and used in PMIPv6-related MIB modules that would otherwise define their own representation(s). This MIB module includes references to RFC 4283 [RFC4283] and RFC 5213 [RFC5213]. 5. MIB Definitions 5.1. Proxy Mobile IPv6 Textual Conventions MIB PMIPV6-TC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, mib-2, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579] pmip6TCMIB MODULE-IDENTITY LAST-UPDATED "201205070000Z" -- 7th May, 2012 ORGANIZATION "IETF NETLMM Working Group" CONTACT-INFO " Glenn Mansfield Keeni Postal: Cyber Solutions, Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai, Japan 989-3204. Tel: +81-22-303-4012 Fax: +81-22-303-4015 EMail: glenn@cysols.com Sri Gundavelli Postal: Cisco Systems 170 W.Tasman Drive, San Jose, CA 95134 USA Tel: +1-408-527-6109 EMail: sgundave@cisco.com Keeni, et al. Standards Track [Page 6]
RFC 6475 PMIPV6-MIB May 2012 Kazuhide Koide Postal: KDDI Corporation GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo 102-8460, Japan. Tel: +81-3-6678-3378 EMail: ka-koide@kddi.com Ryuji Wakikawa Postal: TOYOTA InfoTechnology Center, U.S.A., Inc. 465 Bernardo Avenue Mountain View, CA 94043 USA EMail: ryuji@us.toyota-itc.com Support Group EMail: netlmm@ietf.org " DESCRIPTION "This MIB module provides textual conventions for Proxy Mobile IPv6 Management information. Copyright (c) 2012 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). " REVISION "201205070000Z" -- 7th May, 2012 DESCRIPTION "The initial version, published as RFC 6475." ::= { mib-2 205 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- Pmip6TimeStamp64 ::= TEXTUAL-CONVENTION DISPLAY-HINT "6d:2d" STATUS current DESCRIPTION "A 64-bit unsigned integer field containing a timestamp. The value indicates the elapsed time since January 1, 1970, 00:00 UTC, by using a fixed-point format. In this Keeni, et al. Standards Track [Page 7]
RFC 6475 PMIPV6-MIB May 2012 format, the integer number of seconds is contained in the first 48 bits of the field, and the remaining 16 bits indicate the number of 1/65536 fractions of a second. " REFERENCE "RFC 5213: Section 8.8" SYNTAX OCTET STRING (SIZE (8)) Pmip6MnIdentifier ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "The identity of a mobile node in the Proxy Mobile IPv6 domain. This is the stable identifier of a mobile node that the mobility entities in a Proxy Mobile IPv6 domain can always acquire and use for predictably identifying a mobile node. Various forms of identifiers can be used to identify a mobile node (MN). Two examples are a Network Access Identifier (NAI) and an opaque identifier applicable to a particular application. " REFERENCE "RFC 4283: Section 3" SYNTAX OCTET STRING (SIZE (0..255)) Pmip6MnLLIdentifier ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "An identifier that identifies the attached interface of a mobile node. " REFERENCE "RFC 5213: Section 8.6" SYNTAX OCTET STRING (SIZE (0..255)) Pmip6MnIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique integer value, greater than zero, assigned to each mobile node that is currently attached to the Proxy Mobile IPv6 domain by the management system. It is recommended that the values are assigned in a monotonically increasing order starting from 1. It may wrap after reaching its maximum value. The value for each mobile node must remain constant at least from one re-initialization of the entity's network management Keeni, et al. Standards Track [Page 8]
RFC 6475 PMIPV6-MIB May 2012 system to the next re-initialization. " SYNTAX Unsigned32 (1..4294967295) Pmip6MnLLIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique integer value, greater than zero, assigned to each interface of a mobile node that is currently attached to the Proxy Mobile IPv6 domain by the management system. It is recommended that the values are assigned in a monotonically increasing order starting from 1. It may wrap after reaching its maximum value. The value for each interface of a mobile node must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " SYNTAX Unsigned32 (1..4294967295) Pmip6MnInterfaceATT ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The object specifies the access technology that connects the mobile node to the access link on the mobile access gateway. The enumerated values and the corresponding access technology are as follows: reserved (0): Reserved (Not used) logicalNetworkInterface (1): Logical network interface pointToPointInterface (2): Point-to-point interface ethernet (3): Ethernet interface wirelessLan (4): Wireless LAN interface wimax (5): Wimax interface threeGPPGERAN (6): 3GPP GERAN threeGPPUTRAN (7): 3GPP UTRAN threeGPPEUTRAN (8): 3GPP E-UTRAN threeGPP2eHRPD (9): 3GPP2 eHRPD threeGPP2HRPD (10): 3GPP2 HRPD threeGPP21xRTT (11): 3GPP2 1xRTT threeGPP2UMB (12): 3GPP2 UMB " REFERENCE "RFC 5213: Section 8.5, Mobile IPv6 parameters registry on http://www.iana.org/mobility-parameters" SYNTAX INTEGER { Keeni, et al. Standards Track [Page 9]
RFC 6475 PMIPV6-MIB May 2012 reserved (0), logicalNetworkInterface(1), pointToPointInterface (2), ethernet (3), wirelessLan (4), wimax (5), threeGPPGERAN (6), threeGPPUTRAN (7), threeGPPEUTRAN (8), threeGPP2eHRPD (9), threeGPP2HRPD (10), threeGPP21xRTT (11), threeGPP2UMB (12) } END 5.2. The Proxy Mobile IPv6 MIB PMIPV6-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, mib-2, Integer32, Counter32, Gauge32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI -- RFC 2578 PhysAddress, TimeStamp, TruthValue FROM SNMPv2-TC -- RFC 2579 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC 2580 InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB -- RFC 4001 Ipv6AddressIfIdentifierTC FROM IP-MIB -- RFC 4293 mip6MnBLEntry, mip6BindingCacheEntry FROM MOBILEIPV6-MIB -- RFC 4295 Pmip6TimeStamp64, Pmip6MnIdentifier, Pmip6MnLLIdentifier, Pmip6MnIndex, Pmip6MnLLIndex, Pmip6MnInterfaceATT FROM PMIPV6-TC-MIB -- RFC 6475 ; pmip6MIB MODULE-IDENTITY LAST-UPDATED "201205070000Z" -- 7th May, 2012 ORGANIZATION "IETF NETLMM Working Group" CONTACT-INFO " Glenn Mansfield Keeni Postal: Cyber Solutions, Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai 989-3204, Japan. Keeni, et al. Standards Track [Page 10]
RFC 6475 PMIPV6-MIB May 2012 Tel: +81-22-303-4012 Fax: +81-22-303-4015 EMail: glenn@cysols.com Kazuhide Koide Postal: KDDI Corporation GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo 102-8460, Japan. Tel: +81-3-6678-3378 EMail: ka-koide@kddi.com Sri Gundavelli Postal: Cisco 170 W.Tasman Drive, San Jose, CA 95134 USA Tel: +1-408-527-6109 EMail: sgundave@cisco.com Ryuji Wakikawa Postal: TOYOTA InfoTechnology Center, U.S.A., Inc. 465 Bernardo Avenue Mountain View, CA 94043 USA EMail: ryuji@us.toyota-itc.com Support Group EMail: netlmm@ietf.org" DESCRIPTION "The MIB module for monitoring and controlling PMIPv6 entities. Copyright (c) 2012 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). " REVISION "201205070000Z" -- 7th May 2012 DESCRIPTION "Initial version, published as RFC 6475." ::= { mib-2 206 } Keeni, et al. Standards Track [Page 11]
RFC 6475 PMIPV6-MIB May 2012 -- The PMIPv6 MIB has the following 5 primary groups pmip6Notifications OBJECT IDENTIFIER ::= { pmip6MIB 0 } pmip6Objects OBJECT IDENTIFIER ::= { pmip6MIB 1 } pmip6Conformance OBJECT IDENTIFIER ::= { pmip6MIB 2 } pmip6Core OBJECT IDENTIFIER ::= { pmip6Objects 1 } pmip6Mag OBJECT IDENTIFIER ::= { pmip6Objects 2 } pmip6Lma OBJECT IDENTIFIER ::= { pmip6Objects 3 } -- The sub groups pmip6System OBJECT IDENTIFIER ::= { pmip6Core 1 } pmip6Bindings OBJECT IDENTIFIER ::= { pmip6Core 2 } pmip6Conf OBJECT IDENTIFIER ::= { pmip6Core 3 } pmip6Stats OBJECT IDENTIFIER ::= { pmip6Core 4 } pmip6MagSystem OBJECT IDENTIFIER ::= { pmip6Mag 1 } pmip6MagConf OBJECT IDENTIFIER ::= { pmip6Mag 2 } pmip6MagRegistration OBJECT IDENTIFIER ::= { pmip6Mag 3 } pmip6LmaSystem OBJECT IDENTIFIER ::= { pmip6Lma 1 } pmip6LmaConf OBJECT IDENTIFIER ::= { pmip6Lma 2 } -- The pmip6Stats group has the following sub groups pmip6BindingRegCounters OBJECT IDENTIFIER ::= { pmip6Stats 1 } -- -- -- pmip6System group -- -- pmip6Capabilities OBJECT-TYPE SYNTAX BITS { mobilityAccessGateway (0), localMobilityAnchor (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the PMIPv6 functions that are supported by this managed entity. Multiple Proxy Mobile IPv6 functions may be supported by a single entity. mobilityAccessGateway(0) indicates the availability of the mobility access gateway function. localMobilityAnchor(1) indicates the availability of the local mobility anchor function. Keeni, et al. Standards Track [Page 12]
RFC 6475 PMIPV6-MIB May 2012 " REFERENCE "RFC 6275: Sections 3.2, 4.1" ::= { pmip6System 1 } pmip6MobileNodeGeneratedTimestampInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This flag indicates whether or not the MN-generated timestamp mechanism is in use in that Proxy Mobile IPv6 domain. true(1) indicates that the local mobility anchors and mobile access gateways in that Proxy Mobile IPv6 domain apply the MN-generated timestamp considerations. false(0) indicates that the MN-generated timestamp mechanism is not in use in that Proxy Mobile IPv6 domain. The default value for this flag is 'false'. " REFERENCE "RFC 5213: Sections 5.5, 9.3" DEFVAL { false } ::= { pmip6Conf 1 } pmip6FixedMagLinkLocalAddressOnAllAccessLinksType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The InetAddressType of the pmip6FixedMagLinkLocalAddressOnAllAccessLinks that follows. " ::= { pmip6Conf 2 } pmip6FixedMagLinkLocalAddressOnAllAccessLinks OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the link-local address value that all the mobile access gateways should use on any of the access links shared with any of the mobile nodes in that Proxy Mobile IPv6 domain. If this variable is initialized with all zeroes, it implies that the use of fixed link-local address mode is not enabled for that Proxy Mobile IPv6 domain." Keeni, et al. Standards Track [Page 13]
RFC 6475 PMIPV6-MIB May 2012 REFERENCE "RFC 5213: Sections 2.2, 6.8, 6.9.1.1, 6.9.3, 9.3" ::= { pmip6Conf 3 } pmip6FixedMagLinkLayerAddressOnAllAccessLinks OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the link-layer address value that all the mobile access gateways should use on any of the access links shared with any of the mobile nodes in that Proxy Mobile IPv6 domain. For access technologies where there is no link-layer address, this variable MUST be initialized with all zeroes. " REFERENCE "RFC 5213: Sections 6.9.3, 9.3" ::= { pmip6Conf 4 } pmip6MagStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the PMIPv6 mobile access gateway function is enabled for the managed entity. Changing the status from enabled(1) to disabled(2) will terminate the PMIPv6 mobile access gateway function. On the other hand, changing the status from disabled(2) to enabled(1) will start the PMIPv6 mobile access gateway function. The value of this object MUST remain unchanged across reboots of the managed entity. " DEFVAL { disabled } ::= { pmip6MagSystem 1 } pmip6MagProxyCOATable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagProxyCOAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table models the Proxy Care-of Addresses configured on the egress interfaces of the mobile access gateway. This address is the transport endpoint of the Keeni, et al. Standards Track [Page 14]
RFC 6475 PMIPV6-MIB May 2012 tunnel between the local mobility anchor and the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2.2, 6.10" ::= { pmip6MagSystem 2 } pmip6MagProxyCOAEntry OBJECT-TYPE SYNTAX Pmip6MagProxyCOAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry represents a conceptual row in the Proxy-CoA table. It represents a Proxy Care-of Address on the mobile access gateway. Implementers need to be aware that if the total number of octets in pmip6MagProxyCOA exceeds 113, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. " INDEX { pmip6MagProxyCOAType, pmip6MagProxyCOA } ::= { pmip6MagProxyCOATable 1 } Pmip6MagProxyCOAEntry ::= SEQUENCE { pmip6MagProxyCOAType InetAddressType, pmip6MagProxyCOA InetAddress, pmip6MagProxyCOAState INTEGER } pmip6MagProxyCOAType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The InetAddressType of the pmip6MagProxyCOA that follows. " ::= { pmip6MagProxyCOAEntry 1 } pmip6MagProxyCOA OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current Keeni, et al. Standards Track [Page 15]
RFC 6475 PMIPV6-MIB May 2012 DESCRIPTION "The Proxy-CoA configured on the egress interface of the mobile access gateway. The type of the address represented by this object is specified by the corresponding pmip6MagProxyCOAType object. " REFERENCE "RFC 5213: Sections 2.2, 6.10" ::= { pmip6MagProxyCOAEntry 2 } pmip6MagProxyCOAState OBJECT-TYPE SYNTAX INTEGER { unknown(1), activated(2), tunneled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state of the Proxy-CoA: unknown -- The state of the Proxy-CoA cannot be determined. activated -- The Proxy-CoA is ready to establish a tunnel. This state SHOULD be indicated when the MAG is up but has no mobile node. tunneled -- Bidirectional tunnel is established using the Proxy-CoA. " ::= { pmip6MagProxyCOAEntry 3 } pmip6MagEnableMagLocalRouting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This flag indicates whether or not the mobile access gateway is allowed to enable local routing of the traffic exchanged between a visiting mobile node and a correspondent node that is locally connected to one of the interfaces of the mobile access gateway. The correspondent node can be another visiting mobile node as well, or a local fixed node. true(1) indicates that the mobile access gateway routes the traffic locally. false(0) indicates that the mobile access gateway reverse tunnels all the traffic to the mobile node's Keeni, et al. Standards Track [Page 16]
RFC 6475 PMIPV6-MIB May 2012 local mobility anchor. The default value for this flag is 'false'. " REFERENCE "RFC 5213: Section 9.2" DEFVAL { false } ::= { pmip6MagConf 1 } pmip6MagMnIdentifierTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagMnIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the identifiers of mobile nodes attached to the MAG. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2.2, 6.1" ::= { pmip6MagConf 2 } pmip6MagMnIdentifierEntry OBJECT-TYPE SYNTAX Pmip6MagMnIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the mobile node identifier table. " INDEX { pmip6MagBLMnIndex } ::= { pmip6MagMnIdentifierTable 1 } Pmip6MagMnIdentifierEntry ::= SEQUENCE { pmip6MagMnIdentifier Pmip6MnIdentifier } pmip6MagMnIdentifier OBJECT-TYPE SYNTAX Pmip6MnIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identity of a mobile node in the Proxy Mobile IPv6 domain. " REFERENCE "RFC 5213: Sections 2.2, 6.1" Keeni, et al. Standards Track [Page 17]
RFC 6475 PMIPV6-MIB May 2012 ::= { pmip6MagMnIdentifierEntry 1 } pmip6MagMnLLIdentifierTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagMnLLIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the link-layer identifiers of the interfaces of the mobile nodes attached to the MAG. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2.2, 6.1" ::= { pmip6MagConf 3 } pmip6MagMnLLIdentifierEntry OBJECT-TYPE SYNTAX Pmip6MagMnLLIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the mobile node link-layer identifier table. " INDEX { pmip6MagBLMnIndex, pmip6MagBLMnLLIndex } ::= { pmip6MagMnLLIdentifierTable 1 } Pmip6MagMnLLIdentifierEntry ::= SEQUENCE { pmip6MagMnLLIdentifier Pmip6MnLLIdentifier } pmip6MagMnLLIdentifier OBJECT-TYPE SYNTAX Pmip6MnLLIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The link-layer identifier of the mobile node's connected interface on the access link. " REFERENCE "RFC 5213: Sections 2.2, 6.1" ::= { pmip6MagMnLLIdentifierEntry 1 } pmip6MagHomeNetworkPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagHomeNetworkPrefixEntry Keeni, et al. Standards Track [Page 18]
RFC 6475 PMIPV6-MIB May 2012 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table representing the home network prefixes assigned to the connected interfaces of mobile nodes attached to the MAG. " REFERENCE "RFC 5213: Sections 2, 6.1, 6.2" ::= { pmip6MagConf 4 } pmip6MagHomeNetworkPrefixEntry OBJECT-TYPE SYNTAX Pmip6MagHomeNetworkPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the home network prefixes table. Implementers need to be aware that if the total number of octets in pmip6MagHomeNetworkPrefix exceeds 111, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. " INDEX { pmip6MagBLMnIndex, pmip6MagBLMnLLIndex, pmip6MagHomeNetworkPrefixType, pmip6MagHomeNetworkPrefix } ::= { pmip6MagHomeNetworkPrefixTable 1 } Pmip6MagHomeNetworkPrefixEntry ::= SEQUENCE { pmip6MagHomeNetworkPrefixType InetAddressType, pmip6MagHomeNetworkPrefix InetAddress, pmip6MagHomeNetworkPrefixLength InetAddressPrefixLength, pmip6MagHomeNetworkPrefixLifeTime Unsigned32 } pmip6MagHomeNetworkPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The InetAddressType of the pmip6MagHomeNetworkPrefix that follows. " ::= { pmip6MagHomeNetworkPrefixEntry 1 } Keeni, et al. Standards Track [Page 19]
RFC 6475 PMIPV6-MIB May 2012 pmip6MagHomeNetworkPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mobile network prefix that is delegated to the mobile node. The type of the address represented by this object is specified by the corresponding pmip6MagHomeNetworkPrefixType object. " REFERENCE "RFC 5213: Section 2" ::= { pmip6MagHomeNetworkPrefixEntry 2 } pmip6MagHomeNetworkPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of the home network prefix. " ::= { pmip6MagHomeNetworkPrefixEntry 3 } pmip6MagHomeNetworkPrefixLifeTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The lifetime parameter (in seconds) that will be advertised in Router Advertisements by the MAG for this home network prefix. " REFERENCE "RFC 5213: Sections 6.2, 6.7" ::= { pmip6MagHomeNetworkPrefixEntry 4 } pmip6MagBLTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagBLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table corresponds to the Binding Update List (BL) that includes PMIPv6-related information and is maintained by the mobile access gateway. Entries from the table are deleted as the lifetime of the binding expires. " Keeni, et al. Standards Track [Page 20]
RFC 6475 PMIPV6-MIB May 2012 REFERENCE "RFC 6275: Sections 4.5, 11.1 RFC 5213: Section 6.1" ::= { pmip6MagRegistration 1 } pmip6MagBLEntry OBJECT-TYPE SYNTAX Pmip6MagBLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional information from a Binding Update sent by the mobile access gateway to the local mobility anchor. " AUGMENTS {mip6MnBLEntry} ::= { pmip6MagBLTable 1 } Pmip6MagBLEntry ::= SEQUENCE { pmip6MagBLFlag TruthValue, pmip6MagBLMnIndex Pmip6MnIndex, pmip6MagBLMnLLIndex Pmip6MnLLIndex, pmip6MagBLMagLinkLocalAddressType InetAddressType, pmip6MagBLMagLinkLocalAddress InetAddress, pmip6MagBLMagIfIdentifierToMn Ipv6AddressIfIdentifierTC, pmip6MagBLTunnelIfIdentifier Ipv6AddressIfIdentifierTC, pmip6MagBLMnInterfaceATT Pmip6MnInterfaceATT, pmip6MagBLTimeRecentlyAccepted Pmip6TimeStamp64 } pmip6MagBLFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "true(1) indicates that the mobile access gateway sent the Proxy Binding Update with Proxy Registration Flag that indicates to the local mobility anchor that the registration is the Proxy Binding Update and is from a mobile access gateway. false(0) implies that the mobile access gateway is behaving as a simple mobile node. " REFERENCE "RFC 5213: Section 8.1" ::= { pmip6MagBLEntry 1 } pmip6MagBLMnIndex OBJECT-TYPE SYNTAX Pmip6MnIndex MAX-ACCESS read-only Keeni, et al. Standards Track [Page 21]
RFC 6475 PMIPV6-MIB May 2012 STATUS current DESCRIPTION "The index to the identifier of the attached mobile node in the pmip6MagMnIdentifierTable. " REFERENCE "RFC 5213: Sections 2.2, 6.1, 8.1" ::= { pmip6MagBLEntry 2 } pmip6MagBLMnLLIndex OBJECT-TYPE SYNTAX Pmip6MnLLIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index to the link-layer identifier of the mobile node's connected interface in the pmip6MagMnLLIdentifierTable. " REFERENCE "RFC 5213: Sections 2.2, 6.1, 8.1" ::= { pmip6MagBLEntry 3 } pmip6MagBLMagLinkLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The InetAddressType of the pmip6MagBLMagLinkLocalAddress that follows. " ::= { pmip6MagBLEntry 4 } pmip6MagBLMagLinkLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The link-local address of the mobile access gateway on the access link shared with the mobile node. This is the address that is present in the Link-local Address option of the corresponding Proxy Binding Update message. " REFERENCE "RFC 3963: Sections 4.1, 5.1" ::= { pmip6MagBLEntry 5 } pmip6MagBLMagIfIdentifierToMn OBJECT-TYPE Keeni, et al. Standards Track [Page 22]
RFC 6475 PMIPV6-MIB May 2012 SYNTAX Ipv6AddressIfIdentifierTC MAX-ACCESS read-only STATUS current DESCRIPTION "The interface identifier (if-id) of the point-to-point link between the mobile node and the mobile access gateway. This is internal to the mobile access gateway and is used to associate the Proxy Mobile IPv6 tunnel to the access link where the mobile node is attached. " REFERENCE "RFC 5213: Sections 6.1, 8.1" ::= { pmip6MagBLEntry 6 } pmip6MagBLTunnelIfIdentifier OBJECT-TYPE SYNTAX Ipv6AddressIfIdentifierTC MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel interface identifier (tunnel-if-id) of the bidirectional tunnel between the mobile node's local mobility anchor and the mobile access gateway. This is internal to the mobile access gateway. The tunnel interface identifier is acquired during the tunnel creation. " REFERENCE "RFC 5213: Sections 6.1, 8.1" ::= { pmip6MagBLEntry 7 } pmip6MagBLMnInterfaceATT OBJECT-TYPE SYNTAX Pmip6MnInterfaceATT MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the access technology by which the mobile node is currently attached to the mobile access gateway. " REFERENCE "RFC 5213: Sections 6.9.1.1, 6.9.1.5, 8.1" ::= { pmip6MagBLEntry 8 } pmip6MagBLTimeRecentlyAccepted OBJECT-TYPE SYNTAX Pmip6TimeStamp64 MAX-ACCESS read-only STATUS current DESCRIPTION "The 64-bit timestamp value of the most recently accepted Proxy Binding Update message sent for this Keeni, et al. Standards Track [Page 23]
RFC 6475 PMIPV6-MIB May 2012 mobile node. This is the time of day on the mobile access gateway, when the Proxy Binding Acknowledgement message with the Status field set to 0 was received. If the Timestamp option is not present in the Proxy Binding Update message (i.e., when the sequence-number-based scheme is in use), the value MUST be initialized with all zeroes. " REFERENCE "RFC 5213: Sections 5.1, 8.1" ::= { pmip6MagBLEntry 9 } pmip6MagMnProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6MagMnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table corresponds to the mobile node's policy profile that includes the essential operational parameters that are required by the network entities for managing the mobile node's mobility service. It contains policy profiles of mobile nodes that are connected to the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Section 6.2" ::= { pmip6MagRegistration 2 } pmip6MagMnProfileEntry OBJECT-TYPE SYNTAX Pmip6MagMnProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about the mobile node's policy profile. " INDEX { pmip6MagProfMnIndex } ::= { pmip6MagMnProfileTable 1 } Pmip6MagMnProfileEntry ::= SEQUENCE { pmip6MagProfMnIndex Pmip6MnIndex, pmip6MagProfMnIdentifier Pmip6MnIdentifier, pmip6MagProfMnLocalMobilityAnchorAddressType InetAddressType, pmip6MagProfMnLocalMobilityAnchorAddress InetAddress Keeni, et al. Standards Track [Page 24]
RFC 6475 PMIPV6-MIB May 2012 } pmip6MagProfMnIndex OBJECT-TYPE SYNTAX Pmip6MnIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for a mobile node in the Proxy Mobile IPv6 domain. " ::= { pmip6MagMnProfileEntry 1 } pmip6MagProfMnIdentifier OBJECT-TYPE SYNTAX Pmip6MnIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identity of a mobile node in the Proxy Mobile IPv6 domain. " REFERENCE "RFC 5213: Section 2.2" ::= { pmip6MagMnProfileEntry 2 } pmip6MagProfMnLocalMobilityAnchorAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The InetAddressType of the pmip6MagMnLocalMobilityAnchorAddress that follows. " ::= { pmip6MagMnProfileEntry 3 } pmip6MagProfMnLocalMobilityAnchorAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The global address that is configured on the interface of the local mobility anchor and is the transport endpoint of the bidirectional tunnel established between the local mobility anchor and the mobile access gateway. This is the address to which the mobile access gateway sends the Proxy Binding Update messages. " REFERENCE "RFC 5213: Section 2.2" ::= { pmip6MagMnProfileEntry 4 } Keeni, et al. Standards Track [Page 25]
RFC 6475 PMIPV6-MIB May 2012 pmip6BindingCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6BindingCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table models the Binding Cache on the local mobility anchor. Entries from the table are deleted as the lifetime of the binding expires. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 6275: Sections 4.5, 9.1, 10.1 RFC 5213: Section 5.1" ::= { pmip6Bindings 1 } pmip6BindingCacheEntry OBJECT-TYPE SYNTAX Pmip6BindingCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional information contained in the Binding Cache table of the local mobility anchor. " AUGMENTS {mip6BindingCacheEntry} ::= { pmip6BindingCacheTable 1 } Pmip6BindingCacheEntry ::= SEQUENCE { pmip6BindingPBUFlag TruthValue, pmip6BindingMnIndex Pmip6MnIndex, pmip6BindingMnLLIndex Pmip6MnLLIndex, pmip6BindingMagLinkLocalAddressType InetAddressType, pmip6BindingMagLinkLocalAddress InetAddress, pmip6BindingTunnelIfIdentifier Ipv6AddressIfIdentifierTC, pmip6BindingMnInterfaceATT Pmip6MnInterfaceATT, pmip6BindingTimeRecentlyAccepted Pmip6TimeStamp64 } pmip6BindingPBUFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "true(1) indicates that the local mobility anchor Keeni, et al. Standards Track [Page 26]
RFC 6475 PMIPV6-MIB May 2012 accepted the binding update with Proxy Registration Flag from a mobile access gateway. false(0) implies that the binding cache is from a mobile node. In this case, the remaining objects will not be accessible. " REFERENCE "RFC 5213: Sections 5.1, 8.1" ::= { pmip6BindingCacheEntry 1 } pmip6BindingMnIndex OBJECT-TYPE SYNTAX Pmip6MnIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An index to the identifier of the registered mobile node. " REFERENCE "RFC 5213: Sections 2.2, 5.1, 8.1 RFC 4283: Section 3" ::= { pmip6BindingCacheEntry 2 } pmip6BindingMnLLIndex OBJECT-TYPE SYNTAX Pmip6MnLLIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index to the link-layer identifier of the mobile node's connected interface on the access link. " REFERENCE "RFC 5213: Sections 2.2, 5.1, 8.1" ::= { pmip6BindingCacheEntry 3 } pmip6BindingMagLinkLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The InetAddressType of the pmip6BindingMagLinkLocalAddress that follows. " ::= { pmip6BindingCacheEntry 4 } pmip6BindingMagLinkLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current Keeni, et al. Standards Track [Page 27]
RFC 6475 PMIPV6-MIB May 2012 DESCRIPTION "The link-local address of the mobile access gateway on the point-to-point link shared with the mobile node. This is generated by the local mobility anchor after accepting the initial Proxy Binding Update message. This is the address that is present in the Link-local Address option of the corresponding Proxy Binding Acknowledgement message. " REFERENCE "RFC 5213: Sections 5.1, 6.9.1.2, 8.2" ::= { pmip6BindingCacheEntry 5 } pmip6BindingTunnelIfIdentifier OBJECT-TYPE SYNTAX Ipv6AddressIfIdentifierTC MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel interface identifier (tunnel-if-id) of the bidirectional tunnel between the local mobility anchor and the mobile access gateway where the mobile node is currently anchored. This is internal to the local mobility anchor. The tunnel interface identifier is acquired during the tunnel creation. " REFERENCE "RFC 5213: Sections 5.1, 8.1" ::= { pmip6BindingCacheEntry 6 } pmip6BindingMnInterfaceATT OBJECT-TYPE SYNTAX Pmip6MnInterfaceATT MAX-ACCESS read-only STATUS current DESCRIPTION "The access technology type by which the mobile node is currently attached. This is obtained from the Access Technology Type option, present in the Proxy Binding Update message. " REFERENCE "RFC 5213: Sections 5.1, 8.1" ::= { pmip6BindingCacheEntry 7 } pmip6BindingTimeRecentlyAccepted OBJECT-TYPE SYNTAX Pmip6TimeStamp64 MAX-ACCESS read-only STATUS current DESCRIPTION Keeni, et al. Standards Track [Page 28]
RFC 6475 PMIPV6-MIB May 2012 "The 64-bit timestamp value of the most recently accepted Proxy Binding Update message sent for this mobile node. This is the time of day on the local mobility anchor, when the message was received. If the Timestamp option is not present in the Proxy Binding Update message (i.e., when the sequence number based scheme is in use), the value MUST be initialized with all zeroes. " REFERENCE "RFC 5213: Sections 5.1, 8.1" ::= { pmip6BindingCacheEntry 8 } --- --- --- pmip6Stats group --- --- -- -- pmip6Stats:pmip6BindingRegCounters -- pmip6MissingMnIdentifierOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing mobile node identifier option' (Code 160). Discontinuities in the value of this counter can occur at re-initialization of the mobile router, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 1 } pmip6MagNotAuthorizedForProxyReg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages Keeni, et al. Standards Track [Page 29]
RFC 6475 PMIPV6-MIB May 2012 rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Not authorized to send Proxy Binding Updates' (Code 154). Discontinuities in the value of this counter can occur at re-initialization of the mobile router, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 2 } pmip6NotLMAForThisMobileNode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Not local mobility anchor for this mobile node' (Code 153). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 3 } pmip6ProxyRegNotEnabled OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Proxy Registration not enabled' (Code 152). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " Keeni, et al. Standards Track [Page 30]
RFC 6475 PMIPV6-MIB May 2012 REFERENCE "RFC 5213: Sections 5.3.1, 6.9.1.2, 8.9" ::= { pmip6BindingRegCounters 4 } pmip6MissingHomeNetworkPrefixOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing home network prefix option' (Code 158). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 5 } pmip6MissingHandOffIndicatorOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing handoff indicator option' (Code 161). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 6 } pmip6MissingAccessTechTypeOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Missing access technology type option' (Code 162). Keeni, et al. Standards Track [Page 31]
RFC 6475 PMIPV6-MIB May 2012 Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.1, 8.9" ::= { pmip6BindingRegCounters 7 } pmip6NotAuthorizedForHomeNetworkPrefix OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Mobile node not authorized for one or more of the requesting home network prefixes' (Code 155). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.2, 6.9.1.2, 8.9" ::= { pmip6BindingRegCounters 8 } pmip6TimestampMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'Invalid timestamp value (the clocks are out of sync)' (Code 156). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.5, 6.9.1.2, 8.9" ::= { pmip6BindingRegCounters 9 } Keeni, et al. Standards Track [Page 32]
RFC 6475 PMIPV6-MIB May 2012 pmip6TimestampLowerThanPrevAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'The timestamp value is lower than the previously accepted value' (Code 157). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.5, 6.9.1.2, 8.9" ::= { pmip6BindingRegCounters 10 } pmip6BcePbuPrefixSetDoNotMatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages rejected by the local mobility anchor with status code in the Binding Acknowledgement message indicating 'All the home network prefixes listed in the Binding Cache entry do not match all the prefixes in the received Proxy Binding Update' (Code 159). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.4.1.1, 8.9" ::= { pmip6BindingRegCounters 11 } pmip6InitialBindingRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages that newly creates the Binding Cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, Keeni, et al. Standards Track [Page 33]
RFC 6475 PMIPV6-MIB May 2012 and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.2" ::= { pmip6BindingRegCounters 12 } pmip6BindingLifeTimeExtensionNoHandOff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages for extending the binding lifetime, received from the same mobile access gateway that last updated the binding. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.3" ::= { pmip6BindingRegCounters 13 } pmip6BindingLifeTimeExtensionAfterHandOff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Update messages for extending the binding lifetime, received from a new mobile access gateway where the mobile node's mobility session is handed off. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.4" ::= { pmip6BindingRegCounters 14 } pmip6BindingDeRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION Keeni, et al. Standards Track [Page 34]
RFC 6475 PMIPV6-MIB May 2012 "Total number of Proxy Binding Update messages with the lifetime value of zero. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.5" ::= { pmip6BindingRegCounters 15 } pmip6BindingBindingAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Proxy Binding Acknowledgement messages. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of pmip6CounterDiscontinuityTime. " REFERENCE "RFC 5213: Sections 5.3.5" ::= { pmip6BindingRegCounters 16 } pmip6CounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this PMIPv6 entity's global counters, viz., counters with OID prefix 'pmip6BindingRegCounters' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { pmip6BindingRegCounters 17 } pmip6LmaStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the PMIPv6 local Keeni, et al. Standards Track [Page 35]
RFC 6475 PMIPV6-MIB May 2012 mobility anchor function is enabled for the managed entity. Changing the status from enabled(1) to disabled(2) will terminate the PMIPv6 local mobility anchor function. On the other hand, changing the status from disabled(2) to enabled(1) will start the PMIPv6 local mobility anchor function. The value of this object MUST remain unchanged across reboots of the managed entity. " DEFVAL { disabled } ::= { pmip6LmaSystem 1 } pmip6LmaLMAATable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6LmaLMAAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table models the LMA Addresses configured on the local mobility anchor. Each LMA Address acts as a transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway and is the transport endpoint of the tunnel between the local mobility anchor and the mobile access gateway. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2.2, 5.6" ::= { pmip6LmaSystem 2 } pmip6LmaLMAAEntry OBJECT-TYPE SYNTAX Pmip6LmaLMAAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry represents a conceptual row in the LMAA table. It represents each LMAA on the local mobility anchor. Implementers need to be aware that if the total number of octets in pmip6LmaLMAA exceeds 113, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Keeni, et al. Standards Track [Page 36]
RFC 6475 PMIPV6-MIB May 2012 " INDEX { pmip6LmaLMAAType, pmip6LmaLMAA } ::= { pmip6LmaLMAATable 1 } Pmip6LmaLMAAEntry ::= SEQUENCE { pmip6LmaLMAAType InetAddressType, pmip6LmaLMAA InetAddress, pmip6LmaLMAAState INTEGER } pmip6LmaLMAAType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The InetAddressType of the pmip6LmaLMAA that follows. " ::= { pmip6LmaLMAAEntry 1 } pmip6LmaLMAA OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LMAA configured on the local mobility anchor. The type of the address represented by this object is specified by the corresponding pmip6LmaLMAAType object. " REFERENCE "RFC 5213: Sections 2.2, 5.6" ::= { pmip6LmaLMAAEntry 2 } pmip6LmaLMAAState OBJECT-TYPE SYNTAX INTEGER { unknown(1), activated(2), tunneled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state of the LMAA: unknown -- The state of the LMAA cannot be determined. Keeni, et al. Standards Track [Page 37]
RFC 6475 PMIPV6-MIB May 2012 activated -- The LMAA is ready to establish a tunnel. tunneled -- The LMAA is used to set up the bidirectional tunnel. " ::= { pmip6LmaLMAAEntry 3 } pmip6LmaMinDelayBeforeBCEDelete OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the length of time in milliseconds the local mobility anchor MUST wait before it deletes a Binding Cache entry of a mobile node, upon receiving a Proxy Binding Update message from a mobile access gateway with a lifetime value of 0. During this wait time, if the local mobility anchor receives a Proxy Binding Update for the same mobility binding, with a lifetime value greater than 0, then it must update the Binding Cache entry with the accepted binding values. By the end of this wait time, if the local mobility anchor did not receive any valid Proxy Binding Update message for that mobility binding, it MUST delete the Binding Cache entry. This delay essentially ensures that a mobile node's Binding Cache entry is not deleted too quickly and allows some time for the new mobile access gateway to complete the signaling for the mobile node. The default value for this variable is 10000 milliseconds. " REFERENCE "RFC 5213: Sections 5.3.5, 9.1" DEFVAL { 10000 } ::= { pmip6LmaConf 1 } pmip6LmaMaxDelayBeforeNewBCEAssign OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the length of time in milliseconds the local mobility anchor MUST wait for the de-registration message for an existing mobility session before it decides to create a new mobility Keeni, et al. Standards Track [Page 38]
RFC 6475 PMIPV6-MIB May 2012 session. The default value for this variable is 1500 milliseconds. Note that there is a dependency between this value and the values used in the retransmission algorithm for Proxy Binding Updates. The retransmissions need to happen before MaxDelayBeforeNewBCEAssign runs out, as otherwise there are situations where a de-registration from a previous mobile access gateway may be lost, and the local mobility anchor creates, needlessly, a new mobility session and new prefixes for the mobile node. However, this affects situations where there is no information from the lower layers about the type of a handoff or other parameters that can be used for identifying the mobility session. " REFERENCE "RFC 5213: Sections 5.4.1.2, 5.4.1.3, 9.1" DEFVAL { 1500 } ::= { pmip6LmaConf 2 } pmip6LmaTimestampValidityWindow OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable specifies the maximum length of time difference in milliseconds between the timestamp in the received Proxy Binding Update message and the current time of day on the local mobility anchor that is allowed by the local mobility anchor for the received message to be considered valid. The default value for this variable is 300 milliseconds. This variable must be adjusted to suit the deployments. " REFERENCE "RFC 5213: Sections 5.5, 9.1" DEFVAL { 300 } ::= { pmip6LmaConf 3 } pmip6LmaMnIdentifierTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6LmaMnIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the identifiers of mobile nodes served by the LMA. Keeni, et al. Standards Track [Page 39]
RFC 6475 PMIPV6-MIB May 2012 Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2, 6.1" ::= { pmip6LmaConf 4 } pmip6LmaMnIdentifierEntry OBJECT-TYPE SYNTAX Pmip6LmaMnIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the mobile node identifier table. " INDEX { pmip6BindingMnIndex } ::= { pmip6LmaMnIdentifierTable 1 } Pmip6LmaMnIdentifierEntry ::= SEQUENCE { pmip6LmaMnIdentifier Pmip6MnIdentifier } pmip6LmaMnIdentifier OBJECT-TYPE SYNTAX Pmip6MnIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identity of a mobile node in the Proxy Mobile IPv6 domain. " REFERENCE "RFC 5213: Section 2.2" ::= { pmip6LmaMnIdentifierEntry 1 } pmip6LmaMnLLIdentifierTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6LmaMnLLIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the link-layer identifiers of the interfaces of the mobile nodes served by the LMA. Entries in this table are not required to survive a reboot of the managed entity. " REFERENCE "RFC 5213: Sections 2, 6.1" Keeni, et al. Standards Track [Page 40]
RFC 6475 PMIPV6-MIB May 2012 ::= { pmip6LmaConf 5 } pmip6LmaMnLLIdentifierEntry OBJECT-TYPE SYNTAX Pmip6LmaMnLLIdentifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the mobile node link-layer identifier table. " INDEX { pmip6BindingMnIndex, pmip6BindingMnLLIndex } ::= { pmip6LmaMnLLIdentifierTable 1 } Pmip6LmaMnLLIdentifierEntry ::= SEQUENCE { pmip6LmaMnLLIdentifier Pmip6MnLLIdentifier } pmip6LmaMnLLIdentifier OBJECT-TYPE SYNTAX Pmip6MnLLIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The link-layer identifier of the mobile node's connected interface on the access link. " ::= { pmip6LmaMnLLIdentifierEntry 1 } pmip6LmaHomeNetworkPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF Pmip6LmaHomeNetworkPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table representing the home network prefixes assigned to the connected interfaces of all the mobile nodes anchored at the LMA. " REFERENCE "RFC 5213: Sections 2, 5.1, 5.2" ::= { pmip6LmaConf 6 } pmip6LmaHomeNetworkPrefixEntry OBJECT-TYPE SYNTAX Pmip6LmaHomeNetworkPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the home network prefixes table. Keeni, et al. Standards Track [Page 41]
RFC 6475 PMIPV6-MIB May 2012 Implementers need to be aware that if the total number of octets in pmip6LmaHomeNetworkPrefix exceeds 111 then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. " INDEX { pmip6BindingMnIndex, pmip6BindingMnLLIndex, pmip6LmaHomeNetworkPrefixType, pmip6LmaHomeNetworkPrefix } ::= { pmip6LmaHomeNetworkPrefixTable 1 } Pmip6LmaHomeNetworkPrefixEntry ::= SEQUENCE { pmip6LmaHomeNetworkPrefixType InetAddressType, pmip6LmaHomeNetworkPrefix InetAddress, pmip6LmaHomeNetworkPrefixLength InetAddressPrefixLength, pmip6LmaHomeNetworkPrefixLifeTime Gauge32 } pmip6LmaHomeNetworkPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The InetAddressType of the pmip6LmaHomeNetworkPrefix that follows. " ::= { pmip6LmaHomeNetworkPrefixEntry 1 } pmip6LmaHomeNetworkPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mobile network prefix that is delegated to the mobile node. The type of the address represented by this object is specified by the corresponding pmip6LmaHomeNetworkPrefixType object. " REFERENCE "RFC 5213: Section 2" ::= { pmip6LmaHomeNetworkPrefixEntry 2 } pmip6LmaHomeNetworkPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only Keeni, et al. Standards Track [Page 42]
RFC 6475 PMIPV6-MIB May 2012 STATUS current DESCRIPTION "The prefix length of the home network prefix. " ::= { pmip6LmaHomeNetworkPrefixEntry 3 } pmip6LmaHomeNetworkPrefixLifeTime OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The lifetime (in seconds) granted to the mobile node for this registration. " REFERENCE "RFC 5213: Section 5.3" ::= { pmip6LmaHomeNetworkPrefixEntry 4 } -- -- pmip6Notifications -- -- pmip6MagHomeTunnelEstablished NOTIFICATION-TYPE OBJECTS { pmip6MagBLTunnelIfIdentifier, pmip6MagProxyCOAState } STATUS current DESCRIPTION "This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel is established between the local mobility anchor and mobile access gateway. " REFERENCE "RFC 5213: Section 5.6.1" ::= { pmip6Notifications 1 } pmip6MagHomeTunnelReleased NOTIFICATION-TYPE OBJECTS { pmip6MagBLTunnelIfIdentifier, pmip6MagProxyCOAState } STATUS current DESCRIPTION "This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel between the local Keeni, et al. Standards Track [Page 43]
RFC 6475 PMIPV6-MIB May 2012 mobility anchor and mobile access gateway is released. " REFERENCE "RFC 5213: Section 5.6.1" ::= { pmip6Notifications 2} pmip6LmaHomeTunnelEstablished NOTIFICATION-TYPE OBJECTS { pmip6BindingTunnelIfIdentifier, pmip6LmaLMAAState } STATUS current DESCRIPTION "This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel is established between the local mobility anchor and mobile access gateway. " REFERENCE "RFC 5213: Section 5.6.1" ::= { pmip6Notifications 3 } pmip6LmaHomeTunnelReleased NOTIFICATION-TYPE OBJECTS { pmip6BindingTunnelIfIdentifier, pmip6LmaLMAAState } STATUS current DESCRIPTION "This notification is sent by the Proxy Mobile IPv6 entities every time the tunnel between the local mobility anchor and mobile access gateway is released. " REFERENCE "RFC 5213: Section 5.6.1" ::= { pmip6Notifications 4} -- Conformance information pmip6Groups OBJECT IDENTIFIER ::= { pmip6Conformance 1 } pmip6Compliances OBJECT IDENTIFIER ::= { pmip6Conformance 2 } -- Units of conformance pmip6SystemGroup OBJECT-GROUP OBJECTS { pmip6Capabilities, pmip6MobileNodeGeneratedTimestampInUse, pmip6FixedMagLinkLocalAddressOnAllAccessLinksType, pmip6FixedMagLinkLocalAddressOnAllAccessLinks, pmip6FixedMagLinkLayerAddressOnAllAccessLinks Keeni, et al. Standards Track [Page 44]
RFC 6475 PMIPV6-MIB May 2012 } STATUS current DESCRIPTION " A collection of objects for basic PMIPv6 monitoring." ::= { pmip6Groups 1 } pmip6BindingCacheGroup OBJECT-GROUP OBJECTS { pmip6BindingPBUFlag, pmip6BindingMnIndex, pmip6BindingMnLLIndex, pmip6BindingMagLinkLocalAddressType, pmip6BindingMagLinkLocalAddress, pmip6BindingTunnelIfIdentifier, pmip6BindingMnInterfaceATT, pmip6BindingTimeRecentlyAccepted, pmip6LmaMnIdentifier, pmip6LmaMnLLIdentifier } STATUS current DESCRIPTION " A collection of objects for monitoring the PMIPv6 extensions of the Binding Cache." ::= { pmip6Groups 2 } pmip6StatsGroup OBJECT-GROUP OBJECTS { pmip6MissingMnIdentifierOption, pmip6MagNotAuthorizedForProxyReg, pmip6NotLMAForThisMobileNode, pmip6ProxyRegNotEnabled, pmip6MissingHomeNetworkPrefixOption, pmip6MissingHandOffIndicatorOption, pmip6MissingAccessTechTypeOption, pmip6NotAuthorizedForHomeNetworkPrefix, pmip6TimestampMismatch, pmip6TimestampLowerThanPrevAccepted, pmip6BcePbuPrefixSetDoNotMatch, pmip6InitialBindingRegistrations, pmip6BindingLifeTimeExtensionNoHandOff, pmip6BindingLifeTimeExtensionAfterHandOff, pmip6BindingDeRegistrations, pmip6BindingBindingAcks, pmip6CounterDiscontinuityTime } STATUS current DESCRIPTION Keeni, et al. Standards Track [Page 45]
RFC 6475 PMIPV6-MIB May 2012 " A collection of objects for basic PMIPv6 statistics monitoring. " ::= { pmip6Groups 3 } pmip6MagSystemGroup OBJECT-GROUP OBJECTS { pmip6MagStatus, pmip6MagProxyCOAState } STATUS current DESCRIPTION " A collection of objects for monitoring the PMIPv6-system-related objects on a mobile router." ::= { pmip6Groups 4 } pmip6MagConfigurationGroup OBJECT-GROUP OBJECTS { pmip6MagHomeNetworkPrefixLength, pmip6MagHomeNetworkPrefixLifeTime, pmip6MagEnableMagLocalRouting } STATUS current DESCRIPTION " A collection of objects for monitoring the configuration-related objects on a mobile access gateway. " ::= { pmip6Groups 5 } pmip6MagRegistrationGroup OBJECT-GROUP OBJECTS { pmip6MagBLFlag, pmip6MagBLMnIndex, pmip6MagBLMnLLIndex, pmip6MagBLMagLinkLocalAddressType, pmip6MagBLMagLinkLocalAddress, pmip6MagBLMagIfIdentifierToMn, pmip6MagBLTunnelIfIdentifier, pmip6MagBLMnInterfaceATT, pmip6MagBLTimeRecentlyAccepted, pmip6MagMnIdentifier, pmip6MagMnLLIdentifier, pmip6MagProfMnIdentifier, pmip6MagProfMnLocalMobilityAnchorAddressType, pmip6MagProfMnLocalMobilityAnchorAddress } STATUS current DESCRIPTION Keeni, et al. Standards Track [Page 46]
RFC 6475 PMIPV6-MIB May 2012 " A collection of objects for monitoring the registration-related objects on a mobile access gateway. " ::= { pmip6Groups 6 } pmip6LmaSystemGroup OBJECT-GROUP OBJECTS { pmip6LmaStatus, pmip6LmaLMAAState } STATUS current DESCRIPTION " A collection of objects for monitoring the system-related objects on an LMA." ::= { pmip6Groups 7 } pmip6LmaConfigurationGroup OBJECT-GROUP OBJECTS { pmip6LmaMinDelayBeforeBCEDelete, pmip6LmaMaxDelayBeforeNewBCEAssign, pmip6LmaTimestampValidityWindow, pmip6LmaHomeNetworkPrefixLength, pmip6LmaHomeNetworkPrefixLifeTime } STATUS current DESCRIPTION " A collection of objects for Monitoring the configuration-related objects on an LMA." ::= { pmip6Groups 8 } pmip6MagNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { pmip6MagHomeTunnelEstablished, pmip6MagHomeTunnelReleased } STATUS current DESCRIPTION "A collection of notifications from a home agent or correspondent node to the Manager about the tunnel status of the mobile router. " ::= { pmip6Groups 9 } pmip6LmaNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { pmip6LmaHomeTunnelEstablished, pmip6LmaHomeTunnelReleased Keeni, et al. Standards Track [Page 47]
RFC 6475 PMIPV6-MIB May 2012 } STATUS current DESCRIPTION "A collection of notifications from a home agent or correspondent node to the Manager about the tunnel status of the mobile router. " ::= { pmip6Groups 10 } -- Compliance statements pmip6CoreCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- ipv6 addresses for the pmip6BindingHomeAddress -- object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6SystemGroup } ::= { pmip6Compliances 1 } pmip6Compliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB. " MODULE -- this module MANDATORY-GROUPS { pmip6SystemGroup, pmip6BindingCacheGroup, pmip6StatsGroup } ::= { pmip6Compliances 2 } pmip6CoreReadOnlyCompliance MODULE-COMPLIANCE STATUS current Keeni, et al. Standards Track [Page 48]
RFC 6475 PMIPV6-MIB May 2012 DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). " MODULE -- this module MANDATORY-GROUPS { pmip6SystemGroup } OBJECT pmip6MobileNodeGeneratedTimestampInUse MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinksType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLayerAddressOnAllAccessLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 3 } pmip6ReadOnlyCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). " MODULE -- this module MANDATORY-GROUPS { pmip6SystemGroup, pmip6BindingCacheGroup, pmip6StatsGroup } OBJECT pmip6MobileNodeGeneratedTimestampInUse MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinksType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLocalAddressOnAllAccessLinks Keeni, et al. Standards Track [Page 49]
RFC 6475 PMIPV6-MIB May 2012 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6FixedMagLinkLayerAddressOnAllAccessLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 4 } pmip6MagCoreCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6MagSystemGroup } ::= { pmip6Compliances 5 } pmip6MagCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB for monitoring configuration- related information, registration details, and statistics on a mobile access gateway. Keeni, et al. Standards Track [Page 50]
RFC 6475 PMIPV6-MIB May 2012 There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- -- OBJECT pmip6MagHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6MagSystemGroup, pmip6MagConfigurationGroup, pmip6MagRegistrationGroup } ::= { pmip6Compliances 6 } pmip6MagCoreReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode). Keeni, et al. Standards Track [Page 51]
RFC 6475 PMIPV6-MIB May 2012 There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6MagSystemGroup } OBJECT pmip6MagStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 7 } pmip6MagReadOnlyCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read- write (i.e., in read-only mode) and with support for monitoring configuration-related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in Keeni, et al. Standards Track [Page 52]
RFC 6475 PMIPV6-MIB May 2012 SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6MagProxyCOAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOA -- object. -- -- OBJECT pmip6MagProxyCOA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6MagProxyCOAType -- object. -- -- OBJECT pmip6MagHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- -- OBJECT pmip6MagHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6MagHomeNetworkPrefix object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6MagSystemGroup, pmip6MagConfigurationGroup, pmip6MagRegistrationGroup } OBJECT pmip6MagStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6MagEnableMagLocalRouting MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 8 } Keeni, et al. Standards Track [Page 53]
RFC 6475 PMIPV6-MIB May 2012 pmip6LmaCoreCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6LmaSystemGroup } ::= { pmip6Compliances 9 } pmip6LmaCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB for monitoring configuration- related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global Keeni, et al. Standards Track [Page 54]
RFC 6475 PMIPV6-MIB May 2012 -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- -- OBJECT pmip6LmaHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6LmaSystemGroup, pmip6LmaConfigurationGroup } ::= { pmip6Compliances 10 } pmip6LmaReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- Keeni, et al. Standards Track [Page 55]
RFC 6475 PMIPV6-MIB May 2012 -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6LmaSystemGroup } OBJECT pmip6LmaStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 11 } pmip6LmaReadOnlyCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB without support for read-write (i.e., in read-only mode) and for monitoring configuration-related information, registration details, and statistics on a mobile access gateway. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT pmip6LmaLMAAType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- -- OBJECT pmip6LmaLMAA -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the pmip6LmaLMAA -- object. -- Keeni, et al. Standards Track [Page 56]
RFC 6475 PMIPV6-MIB May 2012 -- OBJECT pmip6LmaHomeNetworkPrefixType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- -- OBJECT pmip6LmaHomeNetworkPrefix -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the -- pmip6LmaHomeNetworkPrefix object. -- " MODULE -- this module MANDATORY-GROUPS { pmip6LmaSystemGroup, pmip6LmaConfigurationGroup } OBJECT pmip6LmaStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6LmaMinDelayBeforeBCEDelete MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6LmaMaxDelayBeforeNewBCEAssign MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6LmaTimestampValidityWindow MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT pmip6LmaHomeNetworkPrefixLifeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { pmip6Compliances 12 } pmip6MagNotificationCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB and support notification from the mobile access gateway. Keeni, et al. Standards Track [Page 57]
RFC 6475 PMIPV6-MIB May 2012 " MODULE -- this module MANDATORY-GROUPS { pmip6MagNotificationGroup } ::= { pmip6Compliances 13 } pmip6LmaNotificationCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the PMIPV6-MIB and support notification from the LMA. " MODULE -- this module MANDATORY-GROUPS { pmip6LmaNotificationGroup } ::={ pmip6Compliances 14 } END 6. Security Considerations There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and the corresponding sensitivity/vulnerability: The value of the following objects is used to enable or disable the PMIPv6 functionality on the corresponding PMIPv6 entity. Access to these MOs may be abused to disrupt the communication that depends on the PMIPv6 functionality. pmip6MagStatus pmip6LmaStatus Access to the following MOs may be abused to misconfigure PMIPv6 entities and disrupt communications. pmip6MobileNodeGeneratedTimestampInUse pmip6FixedMagLinkLocalAddressOnAllAccessLinksType pmip6FixedMagLinkLocalAddressOnAllAccessLinks pmip6FixedMagLinkLayerAddressOnAllAccessLinks pmip6MagEnableMagLocalRouting pmip6MagHomeNetworkPrefixLifeTime pmip6LmaMinDelayBeforeBCEDelete pmip6LmaMaxDelayBeforeNewBCEAssign pmip6LmaTimestampValidityWindow Keeni, et al. Standards Track [Page 58]
RFC 6475 PMIPV6-MIB May 2012 pmip6LmaHomeNetworkPrefixLifeTime Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability: The following address-related objects may be considered to be particularly sensitive and/or private. pmip6LmaHomeNetworkPrefixType pmip6LmaHomeNetworkPrefix pmip6LmaHomeNetworkPrefixLength The following MN Identifier-related MOs may be used to identify users. These may be considered to be sensitive and/or private. pmip6MagMnIdentifier pmip6MagMnLLIdentifier pmip6LmaMnIdentifier pmip6LmaMnLLIdentifier pmip6MagProfMnIdentifier SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Implementations MUST provide the security features described by the SNMPv3 framework (see [RFC3410]), including full support for authentication and privacy via the User-based Security Model (USM) [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations MAY also provide support for the Transport Security Model (TSM) [RFC5591] in combination with a secure transport such as SSH [RFC5592] or TLS/DTLS [RFC6353]. Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator Keeni, et al. Standards Track [Page 59]
RFC 6475 PMIPV6-MIB May 2012 responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. 7. IANA Considerations IANA has assigned the following: 1. a base arc in the 'mib-2' (Standards Track) OID tree for the 'pmip6TCMIB' MODULE-IDENTITY defined in the PMIPV6-TC-MIB. 2. a base arc in the 'mib-2' (Standards Track) OID tree for the 'pmip6MIB' MODULE-IDENTITY defined in the PMIPV6-MIB. 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005. [RFC4283] Patel, A., Leung, K., Khalil, M., Akhtar, H., and K. Chowdhury, "Mobile Node Identifier Option for Mobile IPv6 (MIPv6)", RFC 4283, November 2005. [RFC4293] Routhier, S., Ed., "Management Information Base for the Internet Protocol (IP)", RFC 4293, April 2006. [RFC4295] Keeni, G., Koide, K., Nagami, K., and S. Gundavelli, "Mobile IPv6 Management Information Base", RFC 4295, April 2006. Keeni, et al. Standards Track [Page 60]
RFC 6475 PMIPV6-MIB May 2012 [RFC5213] Gundavelli, S., Ed., Leung, K., Devarapalli, V., Chowdhury, K., and B. Patil, "Proxy Mobile IPv6", RFC 5213, August 2008. [RFC6275] Perkins, C., Ed., Johnson, D., and J. Arkko, "Mobility Support in IPv6", RFC 6275, July 2011. 8.2. Informative References [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)", STD 62, RFC 3414, December 2002. [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model", RFC 3826, June 2004. [RFC4831] Kempf, J., Ed., "Goals for Network-Based Localized Mobility Management (NETLMM)", RFC 4831, April 2007. [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model for the Simple Network Management Protocol (SNMP)", RFC 5591, June 2009. [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure Shell Transport Model for the Simple Network Management Protocol (SNMP)", RFC 5592, June 2009. [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)", RFC 6353, July 2011. Keeni, et al. Standards Track [Page 61]
RFC 6475 PMIPV6-MIB May 2012 9. Acknowledgements The following individuals and groups have contributed to this document with discussions and comments: Adrian Farrel Dan Romascanu David Harrington Dirk von-Hugo Francis Dupont Harrie Hazewinkel Jari Arkko Sean Turner Stephen Farrell Vincent Roca WIDE Project netman-WG Keeni, et al. Standards Track [Page 62]
RFC 6475 PMIPV6-MIB May 2012 Authors' Addresses Glenn Mansfield Keeni Cyber Solutions, Inc. 6-6-3 Minami Yoshinari Aoba-ku, Sendai 989-3204 Japan Phone: +81-22-303-4012 EMail: glenn@cysols.com Kazuhide Koide KDDI Corporation GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo, 102-8460 Japan Phone: +81-3-6678-3378 EMail: ka-koide@kddi.com Sri Gundavelli Cisco Systems 170 W.Tasman Drive, San Jose, CA 95134 USA Phone: +1-408-527-6109 EMail: sgundave@cisco.com Ryuji Wakikawa TOYOTA InfoTechnology Center, U.S.A., Inc. 465 Bernardo Avenue Mountain View, CA 94043 USA EMail: ryuji@us.toyota-itc.com Keeni, et al. Standards Track [Page 63]