You are here: irt.org | RFCs | RFC5134 [ previous next ]
Network Working Group M. Mealling Request for Comments: 5134 Refactored Networks, LLC Category: Informational January 2008 A Uniform Resource Name Namespace for the EPCglobal Electronic Product Code (EPC) and Related Standards Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract This document describes URN namespaces that will identify various objects within the EPCglobal system for identifying products within ecommerce and supply chain management applications. 1. Introduction The EPCglobal Architecture Framework [6] is a set of specifications for reading, managing, and acting on object codes and other sensor data as physical objects pass through a supply chain. Events and metadata about physical objects are exchanged via EPCglobal Electronic Product Code Information Services (EPCIS) that are essentially web services that implement agreed upon schema and interfaces. Each object that is tracked by the EPCglobal Architecture Framework is identified by one or more managed identifiers. In many cases, these identification systems existed prior to the Internet becoming widely used. One such namespace is the Global Trade Item Number, or GTIN [7]. GTINs are widely used in global commerce and are managed by GS1. In order for the EPCglobal Architecture Framework to leverage the Internet to the fullest extent possible, the GTIN namespace (and others, such as Global Location Numbers (GLNs), Serialized Shipping Container Code (SSCC), etc. [7]) need to be directly compatible with the URI family of identifiers. The use of GTINs, GLNs, and SSCCs are all managed by GS1. Their use within the EPCglobal Architecture Framework is managed by the GS1 subsidiary known as EPCglobal, Inc. For these, and possibly future Mealling Informational [Page 1]
RFC 5134 The EPC URN January 2008 identification systems, a single Uniform Resource Name (URN) Namespace ID (NID) is being requested: 'epc'. Each of the identifier namespaces mentioned will have a separate sub-space beneath the top level 'epc' NID. In addition to physical object identifiers, the EPCglobal Architecture Framework requires new namespaces for naming system components. In many cases, an interface within the EPCglobal Architecture Framework is XML [11] based and as such will require naming schemes for its XML schema [9] and various namespaces [10]. For these uses, another Uniform Resource Name (URN) Namespace ID (NID) is being requested: 'epcglobal'. Each specification or system component within the EPCglobal Architecture Framework will have a separate sub-space beneath the top level 'epcglobal' NID. Since the EPCglobal Architecture Framework is engineered for widespread and general use, this namespace specification is a formal one, and the namespace IDs that are being requested are 'epc' and 'epcglobal'. It is important to note that it is the explicit intent that various sub-namespaces of the 'epc' NID actually name real, physical objects and/or corporeal entities. In contrast, sub- namespaces of the 'epcglobal' NID name logical or software constructs, such as schema namespaces. 2. 'epc' Registration Template Namespace ID: "epc" Registration Information: Registration Version Number: 1 Registration Date: 2008-01-16 Declared registrant of the namespace: EPCglobal, Inc. is a subsidiary of GS1 Princeton Pike Corporate Center 1009 Lenox Drive, Suite 202 Lawrenceville, NJ 08648, USA bhogan@epcglobalinc.org Tel: +1-609-620-4585 Mealling Informational [Page 2]
RFC 5134 The EPC URN January 2008 Declaration of structure: The normative specification of the structure of the 'epc' namespace is "EPC Tag Data Standards" [5]. The examples given below are not normative. The 'epc' namespace is a set of sub-namespaces that can be extended in the future. The following ABNF [2] defines how the sub-namespaces are identified and any restrictions on their syntax (definitions not specified below can be found in RFC 2141 [1]): EPC-URN = "urn:epc:" sub-ns-name ":" sub-ns sub-ns-name = let-num [ 1*let-num-hyp ] sub-ns = 1*<URN chars> let-num = upper / lower / number let-num-hyp = upper / lower / number / "-" upper = %x41-5A ; "A" - "Z" lower = %x61-7A ; "a" - "z" number = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" For example, the sub-namespace 'sgtin' has the following definition (this ABNF is non-normative): SGTIN-URI = "urn:epc:id:sgtin:" SGTINURIBody SGTINURIBody = 2*(PaddedNumericComponent ".") NumericComponent NumericComponent = ZeroComponent / NonZeroComponent ZeroComponent = "0" NonZeroComponent = NonZeroDigit *Digit PaddedNumericComponent = *Digit Digit = "0" / NonZeroDigit NonZeroDigit = "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" This equates to a namespace that has three period separated series of digits: urn:epc:id:sgtin:900100.0003456.1234567 The first series is a company prefix, the second denotes a product reference assigned by that company, and the third is a serial number for a specific instance of their product. Note that leading zeros are significant. Mealling Informational [Page 3]
RFC 5134 The EPC URN January 2008 Relevant ancillary documentation: The standards that define the EPCglobal Architecture Framework and the processes for creating new sub-namespaces are managed by EPCglobal, Inc. and can be found on its website. Several sub-namespaces are defined in the "EPC Tag Data Standards" [5]. Identifier uniqueness considerations: The namespaces that make up the 'epc' namespace are all managed by an organization with almost 50 years of namespace management experience. In all cases (existing or new), the uniqueness of each namespace is an inherent part of the EPCglobal Architecture Framework. Identifier persistence considerations: The assignment process guarantees that names are not reassigned and that the binding between the name and its resource is permanent, regardless of any standards or organizational changes. Process of identifier assignment: Names are assigned by the EPCglobal standards publication process and by any entities that are sub-delegated by EPCglobal. It is important to note that in many cases the names assigned will explicitly denote physical objects and not an electronic representation of that object. Process of identifier resolution: Certain sub-namespaces are resolved via the Object Naming Service, defined in "Object Naming Service (ONS) Version 1.0" [4], which is a valid implementation of the Dynamic Delegation Discovery System that is defined in RFC 3401 [3]. Rules for Lexical Equivalence: The entire URN is case-sensitive. Conformance with URN Syntax: There are no additional characters reserved except as noted in the ABNF above. Mealling Informational [Page 4]
RFC 5134 The EPC URN January 2008 Validation mechanism: In the case of each sub-namespace, there will be namespace- specific rules for determining validity. In each case, the reader is referred to the appropriate EPCglobal-maintained documentation. Scope: Global 3. 'epcglobal' Registration Template Namespace ID: "epcglobal" Registration Information: Registration Version Number: 1 Registration Date: 2007-03-06 Declared registrant of the namespace: EPCglobal, Inc. is a subsidiary of GS1 Princeton Pike Corporate Center 1009 Lenox Drive, Suite 202 Lawrenceville, NJ 08648, USA bhogan@epcglobalinc.org Tel: +1-609-620-4585 Declaration of structure: The normative specifications for the structure of the 'epcglobal' namespace are various standards available at EPCglobal's public website. The examples given below are not normative. The 'epcglobal' namespace is a set of sub-namespaces that can be extended in the future. The following ABNF defines how the sub-namespaces are identified and any restrictions on their syntax (definitions not specified below can be found in RFC 2141 [1]): Mealling Informational [Page 5]
RFC 5134 The EPC URN January 2008 EPCGLOBAL-URN = "urn:epcglobal:" subnsname ":" subns subnsname = let-num [ 1*let-num-hyp ] subns = 1*<URN chars> let-num = upper / lower / number let-num-hyp = upper / lower / number / "-" upper = %x41-5A ; "A" - "Z" lower = %x61-7A ; "a" - "z" number = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" For example, the identifier "urn:epcglobal:ale:xsd:1" is defined in the "Application Level Events 1.0 Specification" [8] for use as an XML namespace identifier for XML documents conforming to that specification. Relevant ancillary documentation: The standards that define the EPCglobal Architecture Framework and the processes for creating new sub-namespaces are managed by EPCglobal, Inc. and can be found on its website. Identifier uniqueness considerations: The namespaces that make up the 'epcglobal' namespace are all managed by an organization with almost 50 years of namespace management experience. In all cases, the uniqueness of each namespace is an inherent part of the EPCglobal Architecture Framework. Identifier persistence considerations: The assignment process guarantees that names are not reassigned and that the binding between the name and its resource is permanent, regardless of any standards or organizational changes. Process of identifier assignment: Names are assigned by the EPCglobal, Inc. standards publication process. Process of identifier resolution: No resolution mechanism is required or provided. Mealling Informational [Page 6]
RFC 5134 The EPC URN January 2008 Rules for Lexical Equivalence: The entire URN is case-sensitive. Conformance with URN Syntax: There are no additional characters reserved except as noted in the ABNF above. Validation mechanism: In the case of each sub-namespace, there will be namespace- specific rules for determining validity. In each case, the reader is referred to the appropriate EPCglobal-maintained documentation. Scope: Global 4. IANA Considerations This document includes two URN Namespace registrations that have been entered into the IANA registry for URN NIDs. 5. Namespace Considerations Due to EPCglobal, Inc. being a subsidiary of an internationally recognized authority for the identifiers embedded within the 'epc' namespace, as well as being the internationally recognized standards body for the standards that define identifiers in the 'epcglobal' namespace, these namespaces represent the best approach to naming products and entities within the world of supply chain management and ecommerce in general. There are no other alternative namespaces that have the level of authority and industry acceptance that the EPC does. 6. Community Considerations The EPCglobal Architecture Framework is intended to bring the Internet to the world of supply chain management and beyond. It can be used to tie physical objects to their virtual descriptions and as such has many wide ranging applications for the average Internet use. Thus, it is very much the intent that this namespace, and the entire EPCglobal Architecture Framework, considers the entire Internet as the scope of its community. Mealling Informational [Page 7]
RFC 5134 The EPC URN January 2008 7. Security Considerations The EPCglobal Architecture Framework is based almost exclusively on Internet and Web standards. Thus, the security impacts of each of its underlying technologies should be examined for weaknesses and threats. The primary threats will come from the fact that these names will identify physical things that can be of high value, thus the temptation to spoof metadata about that identifier (its cost, size, etc) will be much greater. Therefore, the role of digital signatures, secure resolution mechanisms, and trust relationships is very fundamental to the system. 8. References 8.1. Normative References [1] Moats, R., "URN Syntax", RFC 2141, May 1997. [2] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 4234, October 2005. [3] Mealling, M., "Dynamic Delegation Discovery System (DDDS) Part One: The Comprehensive DDDS", RFC 3401, October 2002. [4] EPCglobal, Inc., "EPCglobal Network Object Name Service (ONS) 1.0", August 2003. [5] EPCglobal, Inc., "EPC(tm) Tag Data Standards Version 1.3", February 2004. [6] Traub, K., Allgair, G., Barthe, H., Burstein, L., Garrett, J., Hogan, B., Rodrigues, B., Sarma, S., Schmidt, J., Schramek, C., Stewart, R., and K. Suen, "The EPCglobal Architecture Framework", July 2005. [7] GS1, "GS1 General Specifications v7.1", January 2007. [8] EPCglobal, Inc., "The Application Level Events (ALE) Specification, Version 1.0", September 2005. 8.2. Informative References [9] Thompson, H., Maloney, M., Beech, D., and N. Mendelsohn, "XML Schema Part 1: Structures Second Edition", World Wide Web Consortium Recommendation REC-xmlschema-1-20041028, October 2004, <http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>. Mealling Informational [Page 8]
RFC 5134 The EPC URN January 2008 [10] Layman, A., Tobin, R., Bray, T., and D. Hollander, "Namespaces in XML 1.1", World Wide Web Consortium FirstEdition REC-xml- names11-20040204, February 2004, <http://www.w3.org/TR/2004/REC-xml-names11-20040204>. [11] Bray, T., Maler, E., Yergeau, F., Sperberg-McQueen, C., and J. Paoli, "Extensible Markup Language (XML) 1.0 (Third Edition)", World Wide Web Consortium FirstEdition REC-xml-20040204, February 2004, <http://www.w3.org/TR/2004/REC-xml-20040204>. Author's Address Michael Mealling Refactored Networks, LLC 1635 Old Hwy 41 Suite 112, Box 138 Kennesaw, GA 30152 US Phone: +1 678 581 9656 EMail: michael@refactored-networks.com URI: http://www.refactored-networks.com Mealling Informational [Page 9]
RFC 5134 The EPC URN January 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Mealling Informational [Page 10]