Home Articles FAQs XREF Games Software Instant Books BBS About FOLDOC RFCs Feedback Sitemap
irt.Org

Request For Comments - RFC3253

You are here: irt.org | RFCs | RFC3253 [ previous next ]






Network Working Group                                           G. Clemm
Request for Comments: 3253                             Rational Software
Category: Standards Track                                      J. Amsden
                                                              T. Ellison
                                                                     IBM
                                                                C. Kaler
                                                               Microsoft
                                                            J. Whitehead
                                                         U.C. Santa Cruz
                                                              March 2002


                    Versioning Extensions to WebDAV
               (Web Distributed Authoring and Versioning)

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

   This document specifies a set of methods, headers, and resource types
   that define the WebDAV (Web Distributed Authoring and Versioning)
   versioning extensions to the HTTP/1.1 protocol.  WebDAV versioning
   will minimize the complexity of clients that are capable of
   interoperating with a variety of versioning repository managers, to
   facilitate widespread deployment of applications capable of utilizing
   the WebDAV Versioning services.  WebDAV versioning includes automatic
   versioning for versioning-unaware clients, version history
   management, workspace management, baseline management, activity
   management, and URL namespace versioning.

Table of Contents

   1 Introduction....................................................  6
   1.1 Relationship to WebDAV........................................  7
   1.2 Notational Conventions........................................  8
   1.3 Terms.........................................................  8
   1.4 Property Values............................................... 11
    1.4.1 Initial Property Value..................................... 11



Clemm, et al.               Standards Track                     [Page 1]



RFC 3253            Versioning Extensions to WebDAV           March 2002


    1.4.2 Protected Property Value................................... 12
    1.4.3 Computed Property Value.................................... 12
    1.4.4 Boolean Property Value..................................... 12
    1.4.5 DAV:href Property Value.................................... 12
   1.5 DAV Namespace XML Elements.................................... 12
   1.6 Method Preconditions and Postconditions....................... 12
    1.6.1 Example - CHECKOUT request................................. 13
   1.7 Clarification of COPY Semantics with Overwrite:T.............. 13
   1.8 Versioning Methods and Write Locks............................ 14
   2 Basic Versioning Features....................................... 14
   2.1 Basic Versioning Packages..................................... 14
   2.2 Basic Versioning Semantics.................................... 16
    2.2.1 Creating a Version-Controlled Resource..................... 16
    2.2.2 Modifying a Version-Controlled Resource.................... 17
    2.2.3 Reporting.................................................. 19
   3 Version-Control Feature......................................... 20
   3.1 Additional Resource Properties................................ 20
    3.1.1 DAV:comment................................................ 20
    3.1.2 DAV:creator-displayname.................................... 20
    3.1.3 DAV:supported-method-set (protected)....................... 20
    3.1.4 DAV:supported-live-property-set (protected)................ 21
    3.1.5 DAV:supported-report-set (protected)....................... 21
   3.2 Version-Controlled Resource Properties........................ 21
    3.2.1 DAV:checked-in (protected)................................. 21
    3.2.2 DAV:auto-version........................................... 22
   3.3 Checked-Out Resource Properties............................... 22
    3.3.1 DAV:checked-out (protected)................................ 23
    3.3.2 DAV:predecessor-set........................................ 23
   3.4 Version Properties............................................ 23
    3.4.1 DAV:predecessor-set (protected)............................ 23
    3.4.2 DAV:successor-set (computed)............................... 23
    3.4.3 DAV:checkout-set (computed)................................ 23
    3.4.4 DAV:version-name (protected)............................... 24
   3.5 VERSION-CONTROL Method........................................ 24
    3.5.1 Example - VERSION-CONTROL.................................. 25
   3.6 REPORT Method................................................. 25
   3.7 DAV:version-tree Report....................................... 26
    3.7.1 Example - DAV:version-tree Report.......................... 27
   3.8 DAV:expand-property Report.................................... 29
    3.8.1 Example - DAV:expand-property.............................. 30
   3.9 Additional OPTIONS Semantics.................................. 31
   3.10 Additional PUT Semantics..................................... 31
   3.11 Additional PROPFIND Semantics................................ 32
   3.12 Additional PROPPATCH Semantics............................... 33
   3.13 Additional DELETE Semantics.................................. 33
   3.14 Additional COPY Semantics.................................... 34
   3.15 Additional MOVE Semantics.................................... 34
   3.16 Additional UNLOCK Semantics.................................. 35



Clemm, et al.               Standards Track                     [Page 2]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   4 Checkout-In-Place Feature....................................... 35
   4.1 Additional Version Properties................................. 35
    4.1.1 DAV:checkout-fork.......................................... 36
    4.1.2 DAV:checkin-fork........................................... 36
   4.2 Checked-Out Resource Properties............................... 36
    4.2.1 DAV:checkout-fork.......................................... 36
    4.2.2 DAV:checkin-fork........................................... 37
   4.3 CHECKOUT Method............................................... 37
    4.3.1 Example - CHECKOUT......................................... 38
   4.4 CHECKIN Method................................................ 38
    4.4.1 Example - CHECKIN.......................................... 40
   4.5 UNCHECKOUT Method............................................. 40
    4.5.1 Example - UNCHECKOUT....................................... 41
   4.6 Additional OPTIONS Semantics.................................. 42
   5 Version-History Feature......................................... 42
   5.1 Version History Properties.................................... 42
    5.1.1 DAV:version-set (protected)................................ 42
    5.1.2 DAV:root-version (computed)................................ 42
   5.2 Additional Version-Controlled Resource Properties............. 42
    5.2.1 DAV:version-history (computed)............................. 43
   5.3 Additional Version Properties................................. 43
    5.3.1 DAV:version-history (computed)............................. 43
   5.4 DAV:locate-by-history Report.................................. 43
    5.4.1 Example - DAV:locate-by-history Report..................... 44
   5.5 Additional OPTIONS Semantics.................................. 45
   5.6 Additional DELETE Semantics................................... 46
   5.7 Additional COPY Semantics..................................... 46
   5.8 Additional MOVE Semantics..................................... 46
   5.9 Additional VERSION-CONTROL Semantics.......................... 46
   5.10 Additional CHECKIN Semantics................................. 47
   6 Workspace Feature............................................... 47
   6.1 Workspace Properties.......................................... 48
    6.1.1 DAV:workspace-checkout-set (computed)...................... 48
   6.2 Additional Resource Properties................................ 48
    6.2.1 DAV:workspace (protected).................................. 48
   6.3 MKWORKSPACE Method............................................ 48
    6.3.1 Example - MKWORKSPACE...................................... 49
   6.4 Additional OPTIONS Semantics.................................. 49
    6.4.1 Example - OPTIONS.......................................... 51
   6.5 Additional DELETE Semantics................................... 51
   6.6 Additional MOVE Semantics..................................... 52
   6.7 Additional VERSION-CONTROL Semantics.......................... 52
    6.7.1 Example - VERSION-CONTROL.................................. 53
   7 Update Feature.................................................. 53
   7.1 UPDATE Method................................................. 53
    7.1.1 Example - UPDATE........................................... 55
   7.2 Additional OPTIONS Semantics.................................. 55
   8 Label Feature................................................... 56



Clemm, et al.               Standards Track                     [Page 3]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   8.1 Additional Version Properties................................. 56
    8.1.1 DAV:label-name-set (protected)............................. 56
   8.2 LABEL Method.................................................. 56
    8.2.1 Example - Setting a label.................................. 58
   8.3 Label Header.................................................. 58
   8.4 Additional OPTIONS Semantics.................................. 59
   8.5 Additional GET Semantics...................................... 59
   8.6 Additional PROPFIND Semantics................................. 59
   8.7 Additional COPY Semantics..................................... 60
   8.8 Additional CHECKOUT Semantics................................. 60
   8.9 Additional UPDATE Semantics................................... 61
   9 Working-Resource Feature........................................ 62
   9.1 Additional Version Properties................................. 62
    9.1.1 DAV:checkout-fork.......................................... 62
    9.1.2 DAV:checkin-fork........................................... 63
   9.2 Working Resource Properties................................... 63
    9.2.1 DAV:auto-update (protected)................................ 63
    9.2.2 DAV:checkout-fork.......................................... 63
    9.2.3 DAV:checkin-fork........................................... 63
   9.3 CHECKOUT Method (applied to a version)........................ 63
    9.3.1 Example - CHECKOUT of a version............................ 65
   9.4 CHECKIN Method (applied to a working resource)................ 65
    9.4.1 Example - CHECKIN of a working resource.................... 66
   9.5 Additional OPTIONS Semantics.................................. 67
   9.6 Additional COPY Semantics..................................... 67
   9.7 Additional MOVE Semantics..................................... 67
   10  Advanced Versioning Features.................................. 67
   10.1 Advanced Versioning Packages................................. 68
   10.2 Advanced Versioning Terms.................................... 68
   11  MERGE Feature................................................. 70
   11.1 Additional Checked-Out Resource Properties................... 70
    11.1.1 DAV:merge-set............................................. 70
    11.1.2 DAV:auto-merge-set........................................ 71
   11.2 MERGE Method................................................. 71
    11.2.1 Example - MERGE........................................... 74
   11.3 DAV:merge-preview Report..................................... 75
    11.3.1 Example - DAV:merge-preview Report........................ 76
   11.4 Additional OPTIONS Semantics................................. 77
   11.5 Additional DELETE Semantics.................................. 77
   11.6 Additional CHECKIN Semantics................................. 77
   12  Baseline Feature.............................................. 77
   12.1 Version-Controlled Configuration Properties.................. 78
    12.1.1 DAV:baseline-controlled-collection (protected)............ 78
   12.2 Checked-Out Configuration Properties......................... 78
    12.2.1 DAV:subbaseline-set....................................... 78
   12.3 Baseline Properties.......................................... 78
    12.3.1 DAV:baseline-collection (protected)....................... 79
    12.3.2 DAV:subbaseline-set (protected)........................... 79



Clemm, et al.               Standards Track                     [Page 4]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   12.4 Additional Resource Properties............................... 79
    12.4.1 DAV:version-controlled-configuration (computed)........... 79
   12.5 Additional Workspace Properties.............................. 80
    12.5.1 DAV:baseline-controlled-collection-set (computed)......... 80
   12.6 BASELINE-CONTROL Method...................................... 80
    12.6.1 Example - BASELINE-CONTROL................................ 82
   12.7 DAV:compare-baseline Report.................................. 84
    12.7.1 Example - DAV:compare-baseline Report..................... 85
   12.8 Additional OPTIONS Semantics................................. 86
   12.9 Additional MKCOL Semantics................................... 86
   12.10 Additional COPY Semantics................................... 86
   12.11 Additional CHECKOUT Semantics............................... 86
   12.12 Additional CHECKIN Semantics................................ 86
   12.13 Additional UPDATE Semantics................................. 87
   12.14 Additional MERGE Semantics.................................. 89
   13  Activity Feature.............................................. 90
   13.1 Activity Properties.......................................... 91
    13.1.1 DAV:activity-version-set (computed)....................... 91
    13.1.2 DAV:activity-checkout-set (computed)...................... 92
    13.1.3 DAV:subactivity-set....................................... 92
    13.1.4 DAV:current-workspace-set (computed)...................... 92
   13.2 Additional Version Properties................................ 92
    13.2.1 DAV:activity-set.......................................... 93
   13.3 Additional Checked-Out Resource Properties................... 93
    13.3.1 DAV:unreserved............................................ 93
    13.3.2 DAV:activity-set.......................................... 93
   13.4 Additional Workspace Properties.............................. 93
    13.4.1 DAV:current-activity-set.................................. 94
   13.5 MKACTIVITY Method............................................ 94
    13.5.1 Example - MKACTIVITY...................................... 95
   13.6 DAV:latest-activity-version Report........................... 95
   13.7 Additional OPTIONS Semantics................................. 96
   13.8 Additional DELETE Semantics.................................. 96
   13.9 Additional MOVE Semantics.................................... 97
   13.10 Additional CHECKOUT Semantics............................... 97
    13.10.1 Example - CHECKOUT with an activity...................... 98
   13.11 Additional CHECKIN Semantics................................ 99
   13.12 Additional MERGE Semantics.................................. 99
   14  Version-Controlled-Collection Feature.........................100
   14.1 Version-Controlled Collection Properties.....................102
    14.1.1 DAV:eclipsed-set (computed)...............................102
   14.2 Collection Version Properties................................103
    14.2.1 DAV:version-controlled-binding-set (protected)............103
   14.3 Additional OPTIONS Semantics.................................103
   14.4 Additional DELETE Semantics..................................103
   14.5 Additional MKCOL Semantics...................................104
   14.6 Additional COPY Semantics....................................104
   14.7 Additional MOVE Semantics....................................104



Clemm, et al.               Standards Track                     [Page 5]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   14.8 Additional VERSION-CONTROL Semantics.........................104
   14.9 Additional CHECKOUT Semantics................................105
   14.10 Additional CHECKIN Semantics................................105
   14.11 Additional UPDATE and MERGE Semantics.......................106
   15  Internationalization Considerations...........................106
   16  Security Considerations.......................................107
   16.1 Auditing and Traceability....................................107
   16.2 Increased Need for Access Control............................108
   16.3 Security Through Obscurity...................................108
   16.4 Denial of Service............................................108
   17  IANA Considerations...........................................109
   18  Intellectual Property.........................................109
   19  Acknowledgements..............................................109
   20  References....................................................110
   Appendix A - Resource Classification..............................111
   A.1 DeltaV-Compliant Unmapped URL.................................111
   A.2 DeltaV-Compliant Resource.....................................111
   A.3 DeltaV-Compliant Collection...................................112
   A.4 Versionable Resource..........................................112
   A.5 Version-Controlled Resource...................................112
   A.6 Version.......................................................113
   A.7 Checked-In Version-Controlled Resource........................113
   A.8 Checked-Out Resource..........................................113
   A.9 Checked-Out Version-Controlled Resource.......................114
   A.10 Working Resource.............................................114
   A.11 Version History..............................................114
   A.12 Workspace....................................................115
   A.13 Activity.....................................................115
   A.14 Version-Controlled Collection................................115
   A.15 Collection Version...........................................115
   A.16 Version-Controlled Configuration.............................116
   A.17 Baseline.....................................................116
   A.18 Checked-Out Version-Controlled Configuration.................116
   Authors' Addresses................................................117
   Full Copyright Statement..........................................118

1  Introduction

   This document specifies a set of methods, headers, and properties
   that define the WebDAV (Web Distributed Authoring and Versioning)
   versioning extensions to the HTTP/1.1 protocol.  Versioning is
   concerned with tracking and accessing the history of important states
   of a web resource, such as a standalone web page.  The benefits of
   versioning in the context of the worldwide web include:







Clemm, et al.               Standards Track                     [Page 6]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   -  A resource has an explicit history and a persistent identity
      across the various states it has had during the course of that
      history.  It allows browsing through past and alternative versions
      of a resource.  Frequently the modification and authorship history
      of a resource is critical information in itself.

   -  Resource states (versions) are given stable names that can support
      externally stored links for annotation and link server support.
      Both annotation and link servers frequently need to store stable
      references to portions of resources that are not under their
      direct control.  By providing stable states of resources, version
      control systems allow not only stable pointers into those
      resources, but also well defined methods to determine the
      relationships of those states of a resource.

   WebDAV Versioning defines both basic and advanced versioning
   functionality.

   Basic versioning allows users to:

   -  Put a resource under version control
   -  Determine whether a resource is under version control
   -  Determine whether a resource update will automatically be captured
      as a new version
   -  Create and access distinct versions of a resource

   Advanced versioning provides additional functionality for parallel
   development and configuration management of sets of web resources.

   This document will first define the properties and method semantics
   for the basic versioning features, and then define the additional
   properties and method semantics for the advanced versioning features.
   An implementer that is only interested in basic versioning should
   skip the advanced versioning sections (Section 10 to Section 14).

1.1 Relationship to WebDAV

   To maximize interoperability and the use of existing protocol
   functionality, versioning support is designed as extensions to the
   WebDAV protocol [RFC2518], which itself is an extension to the HTTP
   protocol [RFC2616].  All method marshalling and postconditions
   defined by RFC 2518 and RFC 2616 continue to hold, to ensure that
   versioning unaware clients can interoperate successfully with
   versioning servers.  Although the versioning extensions are designed
   to be orthogonal to most aspects of the WebDAV and HTTP protocols, a
   clarification to RFC 2518 is required for effective interoperable
   versioning.  This clarification is described in Section 1.7.




Clemm, et al.               Standards Track                     [Page 7]



RFC 3253            Versioning Extensions to WebDAV           March 2002


1.2 Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119.

   The term "protected" is placed in parentheses following the
   definition of a protected property (see Section 1.4.2).

   The term "computed" is placed in parentheses following the definition
   of a computed property (see Section 1.4.3).

   When an XML element type in the "DAV:" namespace is referenced in
   this document outside of the context of an XML fragment, the string
   "DAV:" will be prefixed to the element type.

   When a method is defined in this document, a list of preconditions
   and postconditions will be defined for that method.  If the semantics
   of an existing method is being extended, a list of additional
   preconditions and postconditions will be defined.  A precondition or
   postcondition is prefixed by a parenthesized XML element type that
   identifies that precondition or postcondition (see Section 1.6).

1.3 Terms

   This document uses the terms defined in RFC 2616, in RFC 2518, and in
   this section.  Section 2.2 defines the semantic versioning model
   underlying this terminology.

   Version Control, Checked-In, Checked-Out

      "Version control" is a set of constraints on how a resource can be
      updated.  A resource under version control is either in a
      "checked-in" or "checked-out" state, and the version control
      constraints apply only while the resource is in the checked-in
      state.

   Versionable Resource

      A "versionable resource" is a resource that can be put under
      version control.

   Version-Controlled Resource

      When a versionable resource is put under version control, it
      becomes a "version-controlled resource".  A version-controlled
      resource can be "checked out" to allow modification of its content
      or dead properties by standard HTTP and WebDAV methods.



Clemm, et al.               Standards Track                     [Page 8]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Checked-Out Resource

      A "checked-out resource" is a resource under version control that
      is in the checked-out state.

   Version Resource

      A "version resource", or simply "version", is a resource that
      contains a copy of a particular state (content and dead
      properties) of a version-controlled resource.  A version is
      created by "checking in" a checked-out resource.  The server
      allocates a distinct new URL for each new version, and this URL
      will never be used to identify any resource other than that
      version.  The content and dead properties of a version never
      change.

   Version History Resource

      A "version history resource", or simply "version history", is a
      resource that contains all the versions of a particular version-
      controlled resource.

   Version Name

      A "version name" is a string chosen by the server to distinguish
      one version of a version history from the other versions of that
      version history.  Versions from different version histories may
      have the same version name.

   Predecessor, Successor, Ancestor, Descendant

      When a version-controlled resource is checked out and then
      subsequently checked in, the version that was checked out becomes
      a "predecessor" of the version created by the checkin.  A client
      can specify multiple predecessors for a new version if the new
      version is logically a merge of those predecessors.  When a
      version is connected to another version by traversing one or more
      predecessor relations, it is called an "ancestor" of that version.
      The inverse of the predecessor and ancestor relations are the
      "successor" and "descendant" relations.  Therefore, if X is a
      predecessor of Y, then Y is a successor of X, and if X is an
      ancestor of Y, then Y is a descendant of X.

   Root Version Resource

      The "root version resource", or simply "root version", is the
      version in a version history that is an ancestor of every other
      version in that version history.



Clemm, et al.               Standards Track                     [Page 9]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Workspace Resource

      A "workspace resource", or simply "workspace", is a collection
      that contains at most one version-controlled resource for a given
      version history (see Section 6).

   Working Resource

      A "working resource" is a checked-out resource created by the
      server at a server-defined URL when a version (instead of a
      version-controlled resource) is checked out.  Unlike a checked-out
      version-controlled resource, a working resource is deleted when it
      is checked in.

   Fork, Merge

      When a second successor is added to a version, this creates a
      "fork" in the version history.  When a version is created with
      multiple predecessors, this creates a "merge" in the version
      history.  A server may restrict the version history to be linear
      (with no forks or merges), but an interoperable versioning client
      should be prepared to deal with both forks and merges in the
      version history.




























Clemm, et al.               Standards Track                    [Page 10]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The following diagram illustrates several of the previous
   definitions.  Each box represents a version and each line between two
   boxes represents a predecessor/successor relationship.  For example,
   it shows V3 is a predecessor of V5, V7 is a successor of V5, V1 is an
   ancestor of V4, and V7 is a descendant of V4.  It also shows that
   there is a fork at version V2 and a merge at version V7.

                       History of foo.html

                               +---+
         Root Version -------> |   | V1
                               +---+           ^
                                 |             |
                                 |             |
                               +---+           |
         Version Name ----> V2 |   |           | Ancestor
                               +---+           |
                               /    \          |
                              /      \         |
                         +---+       +---+
                         |   | V3    |   | V4
                      ^  +---+       +---+
                      |    |           |       |
         Predecessor  |    |           |       |
                         +---+       +---+     |
                         |   | V5    |   | V6  | Descendant
                         +---+       +---+     |
         Successor    |       \      /         |
                      |        \    /          |
                      v        +---+           v
                               |   | V7
                               +---+

   Label

      A "label" is a name that can be used to select a version from a
      version history.  A label can be assigned by either a client or
      the server.  The same label can be used in different version
      histories.

1.4 Property Values

1.4.1 Initial Property Value

   Unless an initial value of a property of a given type is defined by
   this document, the initial value of a property of that type is
   implementation dependent.




Clemm, et al.               Standards Track                    [Page 11]



RFC 3253            Versioning Extensions to WebDAV           March 2002


1.4.2 Protected Property Value

   When a property of a specific kind of resource is "protected", the
   property value cannot be updated on that kind of resource except by a
   method explicitly defined as updating that specific property.  In
   particular, a protected property cannot be updated with a PROPPATCH
   request.  Note that a given property can be protected on one kind of
   resource, but not protected on another kind of resource.

1.4.3 Computed Property Value

   When a property is "computed", its value is defined in terms of a
   computation based on the content and other properties of that
   resource, or even of some other resource.  When the semantics of a
   method is defined in this document, the effect of that method on
   non-computed properties will be specified; the effect of that method
   on computed properties will not be specified, but can be inferred
   from the computation defined for those properties.  A computed
   property is always a protected property.

1.4.4 Boolean Property Value

   Some properties take a Boolean value of either "false" or "true".

1.4.5 DAV:href Property Value

   The DAV:href XML element is defined in RFC 2518, Section 12.3.

1.5 DAV Namespace XML Elements in Request and Response Bodies

   Although WebDAV request and response bodies can be extended by
   arbitrary XML elements, which can be ignored by the message
   recipient, an XML element in the DAV namespace MUST NOT be used in
   the request or response body of a versioning method unless that XML
   element is explicitly defined in an IETF RFC.

1.6 Method Preconditions and Postconditions

   A "precondition" of a method describes the state of the server that
   must be true for that method to be performed.  A "postcondition" of a
   method describes the state of the server that must be true after that
   method has been completed.  If a method precondition or postcondition
   for a request is not satisfied, the response status of the request
   MUST be either 403 (Forbidden) if the request should not be repeated
   because it will always fail, or 409 (Conflict) if it is expected that
   the user might be able to resolve the conflict and resubmit the
   request.




Clemm, et al.               Standards Track                    [Page 12]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In order to allow better client handling of 403 and 409 responses, a
   distinct XML element type is associated with each method precondition
   and postcondition of a request.  When a particular precondition is
   not satisfied or a particular postcondition cannot be achieved, the
   appropriate XML element MUST be returned as the child of a top-level
   DAV:error element in the response body, unless otherwise negotiated
   by the request.  In a 207 Multi-Status response, the DAV:error
   element would appear in the appropriate DAV:responsedescription
   element.

1.6.1 Example - CHECKOUT request with DAV:must-be-checked-in response

   >>REQUEST

     CHECKOUT /foo.html HTTP/1.1
     Host: www.webdav.org

   >>RESPONSE

     HTTP/1.1 409 Conflict
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:error xmlns:D="DAV:">
       <D:must-be-checked-in/>
     </D:error>

   In this example, the request to CHECKOUT /foo.html fails because
   /foo.html is not checked in.

1.7 Clarification of COPY Semantics with Overwrite:T

   RFC 2518, Section 8.8.4 states:

   "If a resource exists at the destination and the Overwrite header is
   "T" then prior to performing the copy the server MUST perform a
   DELETE with "Depth: infinity" on the destination resource."

   The purpose of this sentence is to ensure that following a COPY, all
   destination resources have the same content and dead properties as
   the corresponding resources identified by the request-URL (where a
   resource with a given name relative to the Destination URL
   "corresponds" to a resource with the same name relative to the
   request-URL).  If at the time of the request, there already is a
   resource at the destination that has the same resource type as the
   corresponding resource at the request-URL, that resource MUST NOT be
   deleted, but MUST be updated to have the content and dead properties



Clemm, et al.               Standards Track                    [Page 13]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   of its corresponding member.  If a client wishes all resources at the
   destination to be deleted prior to the COPY, it MUST explicitly issue
   a DELETE request.

   The difference between updating a resource and replacing a resource
   with a new resource is especially important when resource history is
   being maintained (the former adds to an existing history, while the
   latter creates a new history).  In addition, locking and access
   control constraints might allow you to update a resource, but not
   allow you to delete it and create a new one in its place.

   Note that this clarification does not apply to a MOVE request.  A
   MOVE request with Overwrite:T MUST perform the DELETE with
   "Depth:infinity" on the destination resource prior to performing the
   MOVE.

1.8 Versioning Methods and Write Locks

   If a write-locked resource has a non-computed property defined by
   this document, the property value MUST NOT be changed by a request
   unless the appropriate lock token is included in the request.  Since
   every method introduced in this document other than REPORT modifies
   at least one property defined by this document, every versioning
   method other than REPORT is affected by a write lock.  In particular,
   the method MUST fail with a 423 (Locked) status if the resource is
   write-locked and the appropriate token is not specified in an If
   request header.

2  Basic Versioning Features

   Each basic versioning feature defines extensions to existing HTTP and
   WebDAV methods, as well as new resource types, live properties, and
   methods.

2.1 Basic Versioning Packages

   A server MAY support any combination of versioning features.
   However, in order to minimize the complexity of a WebDAV basic
   versioning client, a WebDAV basic versioning server SHOULD support
   one of the following three "packages" (feature sets):

   -  Core-Versioning Package: version-control
   -  Basic-Server-Workspace Package: version-control, workspace,
      version-history, checkout
   -  Basic-Client-Workspace Package: version-control, working-
      resource, update, label





Clemm, et al.               Standards Track                    [Page 14]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The core-versioning package supports linear versioning by both
   versioning-aware and versioning-unaware clients.  A versioning-aware
   client can use reports and properties to access previous versions of
   a version-controlled resource.

   The basic workspace packages support parallel development of
   version-controlled resources.  Each client has its own configuration
   of the shared version-controlled resources, and can make changes to
   its configuration without disturbing that of another client.

   In the basic-server-workspace package, all persistent state is
   maintained on the server.  Each client has its own workspace resource
   allocated on the server, where each workspace identifies a
   configuration of the shared version-controlled resources.  Each
   client makes changes to its workspace, and can transfer changes when
   appropriate from one workspace to another.  The server workspace
   package is appropriate for clients with no local persistent state, or
   for clients that wish to expose their working configurations to other
   clients.

   In the basic-client-workspace package, each client maintains in local
   persistent storage the state for its configuration of the shared
   version-controlled resources.  When a client is ready to make its
   changes visible to other clients, it allocates a set of "working
   resources" on the server, updates the content and dead properties of
   these working resources, and then uses the set of working resources
   to update the version-controlled resources.  The working resources
   are used, instead of directly updating the version-controlled
   resources, so that sets of consistent updates can be prepared in
   parallel by multiple clients.  Also, a working resource allows a
   client to prepare a single update that requires multiple server
   requests (e.g. updating both the content and dead properties of a
   resource requires both a PUT and a PROPPATCH).  The client workspace
   package simplifies the server implementation by requiring each client
   to maintain its own namespace, but this requires that the clients
   have local persistent state, and does not allow clients to expose
   their working configurations to other clients.

   A server that supports both basic workspace packages will
   interoperate with all basic versioning clients.











Clemm, et al.               Standards Track                    [Page 15]



RFC 3253            Versioning Extensions to WebDAV           March 2002


2.2 Basic Versioning Semantics

2.2.1 Creating a Version-Controlled Resource

   In order to track the history of the content and dead properties of a
   versionable resource, a user can put the resource under version
   control with a VERSION-CONTROL request.  A VERSION-CONTROL request
   performs three distinct operations:

   1) It creates a new "version history resource".  In basic versioning,
      a version history resource is not assigned a URL, and hence is not
      visible in the http scheme URL space.  However, when the version-
      history feature (see Section 5) is supported, this changes, and
      each version history resource is assigned a new distinct and
      unique server-defined URL.

   2) It creates a new "version resource" and adds it to the new version
      history resource.  The body and dead properties of the new version
      resource are a copy of those of the versionable resource.

      The server assigns the new version resource a new distinct and
      unique URL.

   3) It converts the versionable resource into a "version-controlled
      resource".  The version-controlled resource continues to be
      identified by the same URL that identified it as a versionable
      resource.  As part of this conversion, it adds a DAV:checked-in
      property, whose value contains the URL of the new version
      resource.

   Note that a versionable resource and a version-controlled resource
   are not new types of resources (i.e. they introduce no new
   DAV:resourcetype), but rather they are any type of resource that
   supports the methods and live properties defined for them in this
   document, in addition to all the methods and live properties implied
   by their DAV:resourcetype.  For example, a collection (whose
   DAV:resourcetype is DAV:collection) is a versionable resource if it
   supports the VERSION-CONTROL method, and is a version-controlled
   resource if it supports the version-controlled resource methods and
   live properties.

   In the following example, foo.html is a versionable resource that is
   put under version control.  After the VERSION-CONTROL request
   succeeds, there are two additional resources: a new version history
   resource and a new version resource in that version history.  The
   versionable resource is converted into a version-controlled resource,
   whose DAV:checked-in property identifies the new version resource.




Clemm, et al.               Standards Track                    [Page 16]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The content and dead properties of a resource are represented by the
   symbol appearing inside the box for that resource (e.g., "S1" in the
   following example).

            ===VERSION-CONTROL==>

                      |                       +----+ version
                      |   version-            |    | history
         versionable  |   controlled          +----+ resource
         resource     |   resource              |
         /foo.html    |   /foo.html             |
                      |                         v
           +----+     |     +----+ checked-in +----+ version
           | S1 |     |     | S1 |----------->| S1 | resource
           +----+     |     +----+            +----+ /his/73/ver/1

   Thus, whereas before the VERSION-CONTROL request there was only one,
   non-version-controlled resource, after VERSION-CONTROL there are
   three separate, distinct resources, each containing its own state and
   properties: the version-controlled resource, the version resource,
   and the version history resource.  Since the version-controlled
   resource and the version resource are separate, distinct resources,
   when a method is applied to a version-controlled resource, it is only
   applied to that version-controlled resource, and is not applied to
   the version resource that is currently identified by the
   DAV:checked-in property of that version-controlled resource.
   Although the content and dead properties of a checked-in version-
   controlled resource are required to be the same as those of its
   current DAV:checked-in version, its live properties may differ.  An
   implementation may optimize storage by retrieving the content and
   dead properties of a checked-in version-controlled resource from its
   current DAV:checked-in version rather than storing them in the
   version-controlled resource, but this is just an implementation
   optimization.

   Normally, a resource is placed under version control with an explicit
   VERSION-CONTROL request.  A server MAY automatically place every new
   versionable resource under version control.  In this case, the
   resulting state on the server MUST be the same as if the client had
   explicitly applied a VERSION-CONTROL request to the versionable
   resource.

2.2.2 Modifying a Version-Controlled Resource

   In order to use methods like PUT and PROPPATCH to directly modify the
   content or dead properties of a version-controlled resource, the
   version-controlled resource must first be checked out.  When the
   checked-out resource is checked in, a new version is created in the



Clemm, et al.               Standards Track                    [Page 17]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   version history of that version-controlled resource.  The version
   that was checked out is remembered as the predecessor of the new
   version.

   The DAV:auto-version property (see Sections 3.2.2) of a checked-in
   version-controlled resource determines how it responds to a method
   that attempts to modify its content or dead properties.  Possible
   responses include:

   -  Fail the request.  The resource requires an explicit CHECKOUT
      request for it to be modified (see Sections 4 and 9.2.1).

   -  Automatically checkout the resource, perform the modification, and
      automatically checkin the resource.  This ensures that every state
      of the resource is tracked by the server, but can result in an
      excessive number of versions being created.

   -  Automatically checkout the resource, perform the modification, and
      then if the resource is not write-locked, automatically checkin
      the resource.  If the resource is write-locked, it remains
      checked-out until the write-lock is removed (either explicitly
      through a subsequent UNLOCK request or implicitly through a time-
      out of the write-lock).  This helps a locking client avoid the
      proliferation of versions, while still allowing a non-locking
      client to update the resource.

   -  Automatically checkout the resource, perform the modification, and
      then leave the resource checked out.  If the resource is write-
      locked, it will be automatically checked in when the write-lock is
      removed, but an explicit CHECKIN operation (see Section 4.4) is
      required for a non-write-locked resource.  This minimizes the
      number of new versions that will be created by a versioning
      unaware client, but only a versioning aware client can create new
      versions of a non-write-locked resource.

   -  Fail the request unless the resource is write-locked.  If it is
      write-locked, automatically checkout the resource and perform the
      modification.  The resource is automatically checked in when the
      write-lock is removed.  This minimizes the number of new versions
      that will be created by a versioning unaware client, but never
      automatically checks out a resource that will not subsequently be
      automatically checked in.









Clemm, et al.               Standards Track                    [Page 18]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The following diagram illustrates the effect of the checkout/checkin
   process on a version-controlled resource and its version history.
   The symbol inside a box (S1, S2, S3) represents the current content
   and dead properties of the resource represented by that box.  The
   symbol next to a box (V1, V2, V3) represents the URL for that
   resource.

              ===checkout==>     ===PUT==>     ===checkin==>


           /foo.html (version-controlled resource)

            +----+    |    +----+    |    +----+    |    +----+
            | S2 |    |    | S2 |    |    | S3 |    |    | S3 |
            +----+    |    +----+    |    +----+    |    +----+
         Checked-In=V2|Checked-Out=V2|Checked-Out=V2|Checked-In=V3


           /his/73 (version history for /foo.html)

           +----+     |   +----+     |   +----+     |   +----+
           | S1 | V1  |   | S1 | V1  |   | S1 | V1  |   | S1 | V1
           +----+     |   +----+     |   +----+     |   +----+
              |       |      |       |      |       |      |
              |       |      |       |      |       |      |
           +----+     |   +----+     |   +----+     |   +----+
           | S2 | V2  |   | S2 | V2  |   | S2 | V2  |   | S2 | V2
           +----+     |   +----+     |   +----+     |   +----+
                      |              |              |      |
                      |              |              |      |
                      |              |              |   +----+
                      |              |              |   | S3 | V3
                      |              |              |   +----+

   Note that a version captures only a defined subset of the state of a
   resource.  In particular, a version of a basic resource captures its
   content and dead properties, but not its live properties.

2.2.3 Reporting

   Some versioning information about a resource requires that parameters
   be specified along with that request for information.  Included in
   basic versioning is the required support for an extensible reporting
   mechanism, which includes a REPORT method as well as a live property
   for determining what reports are supported by a particular resource.
   The REPORT method is required by versioning, but it can be used in
   non-versioning WebDAV extensions.




Clemm, et al.               Standards Track                    [Page 19]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   To allow a client to query the properties of all versions in the
   version history of a specified version-controlled resource, basic
   versioning provides the DAV:version-tree report (see Section 3.7).  A
   more powerful version history reporting mechanism is provided by
   applying the DAV:expand-property report (see Section 3.8) to a
   version history resource (see Section 5).

3  Version-Control Feature

   The version-control feature provides support for putting a resource
   under version control, creating an associated version-controlled
   resource and version history resource as described in Section 2.2.1.
   A server indicates that it supports the version-control feature by
   including the string "version-control" as a field in the DAV header
   in the response to an OPTIONS request.  The version-control feature
   MUST be supported if any other versioning feature is supported.

3.1 Additional Resource Properties

   The version-control feature introduces the following REQUIRED
   properties for any WebDAV resource.

3.1.1 DAV:comment

   This property is used to track a brief comment about a resource that
   is suitable for presentation to a user.  The DAV:comment of a version
   can be used to indicate why that version was created.

   <!ELEMENT comment (#PCDATA)>
   PCDATA value: string

3.1.2 DAV:creator-displayname

   This property contains a description of the creator of the resource
   that is suitable for presentation to a user.  The DAV:creator-
   displayname of a version can be used to indicate who created that
   version.

   <!ELEMENT creator-displayname (#PCDATA)>
   PCDATA value: string

3.1.3 DAV:supported-method-set (protected)

   This property identifies the methods that are supported by the
   resource.  A method is supported by a resource if there is some state
   of that resource for which an application of that method will





Clemm, et al.               Standards Track                    [Page 20]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   successfully satisfy all postconditions of that method, including any
   additional postconditions added by the features supported by that
   resource.

   <!ELEMENT supported-method-set (supported-method*)>
   <!ELEMENT supported-method ANY>
   <!ATTLIST supported-method name NMTOKEN #REQUIRED>
   name value: a method name

3.1.4 DAV:supported-live-property-set (protected)

   This property identifies the live properties that are supported by
   the resource.  A live property is supported by a resource if that
   property has the semantics defined for that property.  The value of
   this property MUST identify all live properties defined by this
   document that are supported by the resource, and SHOULD identify all
   live properties that are supported by the resource.

   <!ELEMENT supported-live-property-set (supported-live-property*)>
   <!ELEMENT supported-live-property name>
   <!ELEMENT prop ANY>
   ANY value: a property element type

3.1.5 DAV:supported-report-set (protected)

   This property identifies the reports that are supported by the
   resource.

   <!ELEMENT supported-report-set (supported-report*)>
   <!ELEMENT supported-report report>
   <!ELEMENT report ANY>
   ANY value: a report element type

3.2 Version-Controlled Resource Properties

   The version-control feature introduces the following REQUIRED
   properties for a version-controlled resource.

3.2.1 DAV:checked-in (protected)

   This property appears on a checked-in version-controlled resource,
   and identifies a version that has the same content and dead
   properties as the version-controlled resource.  This property is
   removed when the resource is checked out, and then added back
   (identifying a new version) when the resource is checked back in.

   <!ELEMENT checked-in (href)>




Clemm, et al.               Standards Track                    [Page 21]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.2.2 DAV:auto-version

   If the DAV:auto-version value is DAV:checkout-checkin, when a
   modification request (such as PUT/PROPPATCH) is applied to a
   checked-in version-controlled resource, the request is automatically
   preceded by a checkout and followed by a checkin operation.

   If the DAV:auto-version value is DAV:checkout-unlocked-checkin, when
   a modification request is applied to a checked-in version-controlled
   resource, the request is automatically preceded by a checkout
   operation.  If the resource is not write-locked, the request is
   automatically followed by a checkin operation.

   If the DAV:auto-version value is DAV:checkout, when a modification
   request is applied to a checked-in version-controlled resource, the
   request is automatically preceded by a checkout operation.

   If the DAV:auto-version value is DAV:locked-checkout, when a
   modification request is applied to a write-locked checked-in
   version-controlled resource, the request is automatically preceded by
   a checkout operation.

   If an update to a write-locked checked-in resource is automatically
   preceded by a checkout of that resource, the checkout is associated
   with the write lock.  When this write lock is removed (e.g. from an
   UNLOCK or a lock timeout), if the resource has not yet been checked
   in, the removal of the write lock is automatically preceded by a
   checkin operation.

   A server MAY refuse to allow the value of the DAV:auto-version
   property to be modified, or MAY only support values from a subset of
   the valid values.

   <!ELEMENT auto-version (checkout-checkin | checkout-unlocked-checkin
     | checkout | locked-checkout)? >
   <!ELEMENT checkout-checkin EMPTY>
   <!ELEMENT checkout-unlocked-checkin EMPTY>
   <!ELEMENT checkout EMPTY>
   <!ELEMENT locked-checkout EMPTY>

3.3 Checked-Out Resource Properties

   The version-control feature introduces the following REQUIRED
   properties for a checked-out resource.







Clemm, et al.               Standards Track                    [Page 22]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.3.1 DAV:checked-out (protected)

   This property identifies the version that was identified by the
   DAV:checked-in property at the time the resource was checked out.
   This property is removed when the resource is checked in.

   <!ELEMENT checked-out (href)>

3.3.2 DAV:predecessor-set

   This property determines the DAV:predecessor-set property of the
   version that results from checking in this resource.

   A server MAY reject attempts to modify the DAV:predecessor-set of a
   version-controlled resource.

   <!ELEMENT predecessor-set (href+)>

3.4 Version Properties

   The version-control feature introduces the following REQUIRED
   properties for a version.

3.4.1 DAV:predecessor-set (protected)

   This property identifies each predecessor of this version.  Except
   for the root version, which has no predecessors, each version has at
   least one predecessor.

   <!ELEMENT predecessor-set (href*)>

3.4.2 DAV:successor-set (computed)

   This property identifies each version whose DAV:predecessor-set
   identifies this version.

   <!ELEMENT successor-set (href*)>

3.4.3 DAV:checkout-set (computed)

   This property identifies each checked-out resource whose
   DAV:checked-out property identifies this version.

   <!ELEMENT checkout-set (href*)>







Clemm, et al.               Standards Track                    [Page 23]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.4.4 DAV:version-name (protected)

   This property contains a server-defined string that is different for
   each version in a given version history.  This string is intended for
   display for a user, unlike the URL of a version, which is normally
   only used by a client and not displayed for a user.

   <!ELEMENT version-name (#PCDATA)>
   PCDATA value: string

3.5 VERSION-CONTROL Method

   A VERSION-CONTROL request can be used to create a version-controlled
   resource at the request-URL.  It can be applied to a versionable
   resource or to a version-controlled resource.

   If the request-URL identifies a versionable resource, a new version
   history resource is created, a new version is created whose content
   and dead properties are copied from the versionable resource, and the
   resource is given a DAV:checked-in property that is initialized to
   identify this new version.

   If the request-URL identifies a version-controlled resource, the
   resource just remains under version-control.  This allows a client to
   be unaware of whether or not a server automatically puts a resource
   under version control when it is created.

   If a VERSION-CONTROL request fails, the server state preceding the
   request MUST be restored.

   Marshalling:

      If a request body is included, it MUST be a DAV:version-control
      XML element.

      <!ELEMENT version-control ANY>

      If a response body for a successful request is included, it MUST
      be a DAV:version-control-response XML element.  Note that this
      document does not define any elements for the VERSION-CONTROL
      response body, but the DAV:version-control-response element is
      defined to ensure interoperability between future extensions that
      do define elements for the VERSION-CONTROL response body.

      <!ELEMENT version-control-response ANY>






Clemm, et al.               Standards Track                    [Page 24]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Postconditions:

      (DAV:put-under-version-control): If the request-URL identified a
      versionable resource at the time of the request, the request MUST
      have created a new version history and MUST have created a new
      version resource in that version history.  The resource MUST have
      a DAV:checked-in property that identifies the new version.  The
      content, dead properties, and DAV:resourcetype of the new version
      MUST be the same as those of the resource.  Note that an
      implementation can choose to locate the version history and
      version resources anywhere that it wishes.  In particular, it
      could locate them on the same host and server as the version-
      controlled resource, on a different virtual host maintained by the
      same server, on the same host maintained by a different server, or
      on a different host maintained by a different server.

      (DAV:must-not-change-existing-checked-in-out): If the request-URL
      identified a resource already under version control at the time of
      the request, the request MUST NOT change the DAV:checked-in or
      DAV:checked-out property of that version-controlled resource.

3.5.1 Example - VERSION-CONTROL

   >>REQUEST

     VERSION-CONTROL /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 200 OK

   In this example, /foo.html is put under version control.  A new
   version history is created for it, and a new version is created that
   has a copy of the content and dead properties of /foo.html.  The
   DAV:checked-in property of /foo.html identifies this new version.

3.6 REPORT Method

   A REPORT request is an extensible mechanism for obtaining information
   about a resource.  Unlike a resource property, which has a single
   value, the value of a report can depend on additional information
   specified in the REPORT request body and in the REPORT request
   headers.






Clemm, et al.               Standards Track                    [Page 25]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Marshalling:

      The body of a REPORT request specifies which report is being
      requested, as well as any additional information that will be used
      to customize the report.

      The request MAY include a Depth header.  If no Depth header is
      included, Depth:0 is assumed.

      The response body for a successful request MUST contain the
      requested report.

      If a Depth request header is included, the response MUST be a 207
      Multi-Status.  The request MUST be applied separately to the
      collection itself and to all members of the collection that
      satisfy the Depth value.  The DAV:prop element of a DAV:response
      for a given resource MUST contain the requested report for that
      resource.

   Preconditions:

      (DAV:supported-report): The specified report MUST be supported by
      the resource identified by the request-URL.

   Postconditions:

      (DAV:no-modification): The REPORT method MUST NOT have changed the
      content or dead properties of any resource.

3.7 DAV:version-tree Report

   The DAV:version-tree report describes the requested properties of all
   the versions in the version history of a version.  If the report is
   requested for a version-controlled resource, it is redirected to its
   DAV:checked-in or DAV:checked-out version.

   The DAV:version-tree report MUST be supported by all version
   resources and all version-controlled resources.

   Marshalling:

      The request body MUST be a DAV:version-tree XML element.

      <!ELEMENT version-tree ANY>
      ANY value: a sequence of zero or more elements, with at most one
      DAV:prop element.
      prop: see RFC 2518, Section 12.11




Clemm, et al.               Standards Track                    [Page 26]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      The response body for a successful request MUST be a
      DAV:multistatus XML element.

      multistatus: see RFC 2518, Section 12.9

      The response body for a successful DAV:version-tree REPORT request
      MUST contain a DAV:response element for each version in the
      version history of the version identified by the request-URL.

3.7.1 Example - DAV:version-tree Report

   The version history drawn below would produce the following version
   tree report.

                        foo.html History

                             +---+
                             |   | V1
                             +---+
                            /     \
                           /       \
                       +---+       +---+
                       |   | V2    |   | V2.1.1
                       +---+       +---+

   >>REQUEST

     REPORT /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:version-tree xmlns:D="DAV:">
       <D:prop>
         <D:version-name/>
         <D:creator-displayname/>
         <D:successor-set/>
       </D:prop>
     </D:version-tree>











Clemm, et al.               Standards Track                    [Page 27]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   >>RESPONSE

     HTTP/1.1 207 Multi-Status
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:multistatus xmlns:D="DAV:">
       <D:response>
         <D:href>http://repo.webdav.org/his/23/ver/V1</D:href>
         <D:propstat>
           <D:prop>
             <D:version-name>V1</D:version-name>
             <D:creator-displayname>Fred</D:creator-displayname>
             <D:successor-set>
               <D:href>http://repo.webdav.org/his/23/ver/V2</D:href>
               <D:href>http://repo.webdav.org/his/23/ver/V2.1.1</D:href>
             </D:successor-set>
           </D:prop>
           <D:status>HTTP/1.1 200 OK</D:status>
         </D:propstat>
       </D:response>
       <D:response>
         <D:href>http://repo.webdav.org/his/23/ver/V2</D:href>
         <D:propstat>
           <D:prop>
             <D:version-name>V2</D:version-name>
             <D:creator-displayname>Fred</D:creator-displayname>
             <D:successor-set/>
           </D:prop>
           <D:status>HTTP/1.1 200 OK</D:status>
         </D:propstat>
       </D:response>
       <D:response>
         <D:href>http://repo.webdav.org/his/23/ver/V2.1.1</D:href>
         <D:propstat>
           <D:prop>
             <D:version-name>V2.1.1</D:version-name>
             <D:creator-displayname>Sally</D:creator-displayname>
             <D:successor-set/>
           </D:prop>
           <D:status>HTTP/1.1 200 OK</D:status>
         </D:propstat>
       </D:response>
     </D:multistatus>






Clemm, et al.               Standards Track                    [Page 28]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.8 DAV:expand-property Report

   Many property values are defined as a DAV:href, or a set of DAV:href
   elements.  The DAV:expand-property report provides a mechanism for
   retrieving in one request the properties from the resources
   identified by those DAV:href elements.  This report not only
   decreases the number of requests required, but also allows the server
   to minimize the number of separate read transactions required on the
   underlying versioning store.

   The DAV:expand-property report SHOULD be supported by all resources
   that support the REPORT method.

   Marshalling:

      The request body MUST be a DAV:expand-property XML element.

      <!ELEMENT expand-property (property*)>
      <!ELEMENT property (property*)>
      <!ATTLIST property name NMTOKEN #REQUIRED>
      name value: a property element type
      <!ATTLIST property namespace NMTOKEN "DAV:">
      namespace value: an XML namespace

      The response body for a successful request MUST be a
      DAV:multistatus XML element.

      multistatus: see RFC 2518, Section 12.9

      The properties reported in the DAV:prop elements of the
      DAV:multistatus element MUST be those identified by the
      DAV:property elements in the DAV:expand-property element.  If
      there are DAV:property elements nested within a DAV:property
      element, then every DAV:href in the value of the corresponding
      property is replaced by a DAV:response element whose DAV:prop
      elements report the values of the properties identified by the
      nested DAV:property elements.  The nested DAV:property elements
      can in turn contain DAV:property elements, so that multiple levels
      of DAV:href expansion can be requested.

      Note that a validating parser MUST be aware that the DAV:expand-
      property report effectively modifies the DTD of every property by
      replacing every occurrence of "href" in the DTD with "href |
      response".







Clemm, et al.               Standards Track                    [Page 29]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.8.1 Example - DAV:expand-property

   This example describes how to query a version-controlled resource to
   determine the DAV:creator-display-name and DAV:activity-set of every
   version in the version history of that version-controlled resource.
   This example assumes that the server supports the version-history
   feature (see Section 5).

   >>REQUEST

     REPORT /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:expand-property xmlns:D="DAV:">
       <D:property name="version-history">
         <D:property name="version-set">
           <D:property name="creator-displayname"/>
           <D:property name="activity-set"/>
         </D:property>
       </D:property>
     </D:expand-property>

   >>RESPONSE

     HTTP/1.1 207 Multi-Status
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:multistatus xmlns:D="DAV:">
       <D:response>
         <D:href>http://www.webdav.org/foo.html</D:href>
         <D:propstat>
           <D:prop>
             <D:version-history>
               <D:response>
                 <D:href>http://repo.webdav.org/his/23</D:href>
                 <D:propstat>
                   <D:prop>
                     <D:version-set>
                       <D:response>
   <D:href>http://repo.webdav.org/his/23/ver/1</D:href>
                         <D:propstat>
                           <D:prop>
   <D:creator-displayname>Fred</D:creator-displayname>



Clemm, et al.               Standards Track                    [Page 30]



RFC 3253            Versioning Extensions to WebDAV           March 2002


                             <D:activity-set> <D:href>
                               http://www.webdav.org/ws/dev/sally
                             </D:href> </D:activity-set> </D:prop>
                           <D:status>HTTP/1.1 200 OK</D:status>
                         </D:propstat> </D:response>
                       <D:response>
   <D:href>http://repo.webdav.org/his/23/ver/2</D:href>
                         <D:propstat>
                           <D:prop>
   <D:creator-displayname>Sally</D:creator-displayname>
                             <D:activity-set>
   <D:href>http://repo.webdav.org/act/add-refresh-cmd</D:href>
                             </D:activity-set> </D:prop>
                           <D:status>HTTP/1.1 200 OK</D:status>
                         </D:propstat> </D:response>
                     </D:version-set> </D:prop>
                   <D:status>HTTP/1.1 200 OK</D:status>
                 </D:propstat> </D:response>
             </D:version-history> </D:prop>
           <D:status>HTTP/1.1 200 OK</D:status>
         </D:propstat> </D:response>
     </D:multistatus>

   In this example, the DAV:creator-displayname and DAV:activity-set
   properties of the versions in the DAV:version-set of the
   DAV:version-history of http://www.webdav.org/foo.html are reported.

3.9 Additional OPTIONS Semantics

   If the server supports the version-control feature, it MUST include
   "version-control" as a field in the DAV response header from an
   OPTIONS request on any resource that supports any versioning
   properties, reports, or methods.

3.10 Additional PUT Semantics

   Additional Preconditions:

      (DAV:cannot-modify-version-controlled-content): If the request-URL
      identifies a resource with a DAV:checked-in property, the request
      MUST fail unless DAV:auto-version semantics will automatically
      check out the resource.

      (DAV:cannot-modify-version): If the request-URL identifies a
      version, the request MUST fail.






Clemm, et al.               Standards Track                    [Page 31]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      If the request creates a new resource that is automatically placed
      under version control, all preconditions for VERSION-CONTROL apply
      to the request.

   Additional Postconditions:

      (DAV:auto-checkout): If the resource was a checked-in version-
      controlled resource whose DAV:auto-version property indicates it
      should be automatically checked out but not automatically checked
      in for a modification request, then the server MUST have
      automatically checked out the resource prior to executing the
      request.  In particular, the value of the DAV:checked-out property
      of the resource MUST be that of the DAV:checked-in property prior
      to the request, the DAV:checked-in property MUST have been
      removed, and the DAV:predecessor-set property MUST be initialized
      to be the same as the DAV:checked-out property.  If any part of
      the checkout/update sequence failed, the status from the failed
      part of the request MUST be returned, and the server state
      preceding the request sequence MUST be restored.

      (DAV:auto-checkout-checkin): If the resource was a checked-in
      version-controlled resource whose DAV:auto-version property
      indicates it should be automatically checked out and automatically
      checked in for a modification request, then the server MUST have
      automatically checked out the resource prior to executing the
      request and automatically checked it in after the request.  In
      particular, the DAV:checked-in property of the resource MUST
      identify a new version whose content and dead properties are the
      same as those of the resource.  The DAV:predecessor-set of the new
      version MUST identify the version identified by the DAV:checked-in
      property prior to the request.  If any part of the
      checkout/update/checkin sequence failed, the status from the
      failed part of the request MUST be returned, and the server state
      preceding the request sequence MUST be restored.

      If the request creates a new resource, the new resource MAY have
      automatically been placed under version control, and all
      postconditions for VERSION-CONTROL apply to the request.

3.11 Additional PROPFIND Semantics

   A DAV:allprop PROPFIND request SHOULD NOT return any of the
   properties defined by this document.  This allows a versioning server
   to perform efficiently when a naive client, which does not understand
   the cost of asking a server to compute all possible live properties,
   issues a DAV:allprop PROPFIND request.





Clemm, et al.               Standards Track                    [Page 32]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Preconditions:

      (DAV:supported-live-property): If the request attempts to access a
      property defined by this document, the semantics of that property
      MUST be supported by the server.

3.12 Additional PROPPATCH Semantics

   Additional Preconditions:

      (DAV:cannot-modify-version-controlled-property): If the request
      attempts to modify a dead property, same semantics as PUT (see
      Section 3.10).

      (DAV:cannot-modify-version): If the request attempts to modify a
      dead property, same semantics as PUT (see Section 3.10).

      (DAV:cannot-modify-protected-property): An attempt to modify a
      property that is defined by this document, as being protected for
      that kind of resource, MUST fail.

      (DAV:supported-live-property): An attempt to modify a property
      defined by this document, but whose semantics are not enforced by
      the server, MUST fail.  This helps ensure that a client will be
      notified when it is trying to use a property whose semantics are
      not supported by the server.

   Additional Postconditions:

      (DAV:auto-checkout): If the request modified a dead property, same
      semantics as PUT (see Section 3.10).

      (DAV:auto-checkout-checkin): If the request modified a dead
      property, same semantics as PUT (see Section 3.10).

3.13 Additional DELETE Semantics

   Additional Preconditions:

      (DAV:no-version-delete): A server MAY fail an attempt to DELETE a
      version.

   Additional Postconditions:

      (DAV:update-predecessor-set): If a version was deleted, the server
      MUST have replaced any reference to that version in a
      DAV:predecessor-set by a copy of the DAV:predecessor-set of the
      deleted version.



Clemm, et al.               Standards Track                    [Page 33]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.14 Additional COPY Semantics

   Additional Preconditions:

      If the request creates a new resource that is automatically placed
      under version control, all preconditions for VERSION-CONTROL apply
      to the request.

   Additional Postconditions:

      (DAV:must-not-copy-versioning-property): A property defined by
      this document MUST NOT have been copied to the new resource
      created by this request, but instead that property of the new
      resource MUST have the default initial value it would have had if
      the new resource had been created by a non-versioning method such
      as PUT or a MKCOL.

      (DAV:auto-checkout): If the destination is a version-controlled
      resource, same semantics as PUT (see Section 3.10).

      (DAV:auto-checkout-checkin): If the destination is a version-
      controlled resource, same semantics as PUT (see Section 3.10).

      (DAV:copy-creates-new-resource): If the source of a COPY is a
      version-controlled resource or version, and if there is no
      resource at the destination of the COPY, then the COPY creates a
      new non-version-controlled resource at the destination of the
      COPY.  The new resource MAY automatically be put under version
      control, but the resulting version-controlled resource MUST be
      associated with a new version history created for that new
      version-controlled resource, and all postconditions for
      VERSION-CONTROL apply to the request.

3.15 Additional MOVE Semantics

   Additional Preconditions:

      (DAV:cannot-rename-version): If the request-URL identifies a
      version, the request MUST fail.

   Additional Postconditions:

      (DAV:preserve-versioning-properties): When a resource is moved
      from a source URL to a destination URL, a property defined by this
      document MUST have the same value at the destination URL as it had
      at the source URL.





Clemm, et al.               Standards Track                    [Page 34]



RFC 3253            Versioning Extensions to WebDAV           March 2002


3.16 Additional UNLOCK Semantics

   Note that these semantics apply both to an explicit UNLOCK request,
   as well as to the removal of a lock because of a lock timeout.  If a
   precondition or postcondition cannot be satisfied, the lock timeout
   MUST NOT occur.

   Additional Preconditions:

      (DAV:version-history-is-tree): If the request-URL identifies a
      checked-out version-controlled resource that will be automatically
      checked in when the lock is removed, then the versions identified
      by the DAV:predecessor-set of the checked-out resource MUST be
      descendants of the root version of the version history for the
      DAV:checked-out version.

   Additional Postconditions:

      (DAV:auto-checkin): If the request-URL identified a checked-out
      version-controlled resource that had been automatically checked
      out because of its DAV:auto-version property, the request MUST
      have created a new version in the version history of the
      DAV:checked-out version.  The request MUST have allocated a URL
      for the version that MUST NOT have previously identified any other
      resource, and MUST NOT ever identify a resource other than this
      version.  The content, dead properties, DAV:resourcetype, and
      DAV:predecessor-set of the new version MUST be copied from the
      checked-out resource.  The DAV:version-name of the new version
      MUST be set to a server-defined value distinct from all other
      DAV:version-name values of other versions in the same version
      history.  The request MUST have removed the DAV:checked-out
      property of the version-controlled resource, and MUST have added a
      DAV:checked-in property that identifies the new version.

4  CHECKOUT-IN-PLACE FEATURE

   With the version-control feature, WebDAV locking can be used to avoid
   the proliferation of versions that would result if every modification
   to a version-controlled resource produced a new version.  The
   checkout-in-place feature provides an alternative mechanism that
   allows a client to explicitly check out and check in a resource to
   create a new version.

4.1 Additional Version Properties

   The checkout-in-place feature introduces the following REQUIRED
   properties for a version.




Clemm, et al.               Standards Track                    [Page 35]



RFC 3253            Versioning Extensions to WebDAV           March 2002


4.1.1 DAV:checkout-fork

   This property controls the behavior of CHECKOUT when a version
   already is checked out or has a successor.  If the DAV:checkout-fork
   of a version is DAV:forbidden, a CHECKOUT request MUST fail if it
   would result in that version appearing in the DAV:predecessor-set or
   DAV:checked-out property of more than one version or checked-out
   resource.  If DAV:checkout-fork is DAV:discouraged, such a CHECKOUT
   request MUST fail unless DAV:fork-ok is specified in the CHECKOUT
   request body.

   A server MAY reject attempts to modify the DAV:checkout-fork of a
   version.

   <!ELEMENT checkout-fork ANY>
   ANY value: A sequence of elements with at most one DAV:discouraged
   or DAV:forbidden element.
   <!ELEMENT discouraged EMPTY>
   <!ELEMENT forbidden EMPTY>

4.1.2 DAV:checkin-fork

   This property controls the behavior of CHECKIN when a version already
   has a successor.  If the DAV:checkin-fork of a version is
   DAV:forbidden, a CHECKIN request MUST fail if it would result in that
   version appearing in the DAV:predecessor-set of more than one
   version.  If DAV:checkin-fork is DAV:discouraged, such a CHECKIN
   request MUST fail unless DAV:fork-ok is specified in the CHECKIN
   request body.

   A server MAY reject attempts to modify the DAV:checkout-fork of a
   version.

   <!ELEMENT checkin-fork ANY>
   ANY value: A sequence of elements with at most one DAV:discouraged
   or DAV:forbidden element.
   <!ELEMENT discouraged EMPTY>
   <!ELEMENT forbidden EMPTY>

4.2 Checked-Out Resource Properties

   The checkout-in-place feature introduces the following REQUIRED
   properties for a checked-out resource.

4.2.1 DAV:checkout-fork

   This property determines the DAV:checkout-fork property of the
   version that results from checking in this resource.



Clemm, et al.               Standards Track                    [Page 36]



RFC 3253            Versioning Extensions to WebDAV           March 2002


4.2.2 DAV:checkin-fork

   This property determines the DAV:checkin-fork property of the version
   that results from checking in this resource.

4.3 CHECKOUT Method (applied to a version-controlled resource)

   A CHECKOUT request can be applied to a checked-in version-controlled
   resource to allow modifications to the content and dead properties of
   that version-controlled resource.

   If a CHECKOUT request fails, the server state preceding the request
   MUST be restored.

   Marshalling:

      If a request body is included, it MUST be a DAV:checkout XML
      element.

      <!ELEMENT checkout ANY>

      ANY value: A sequence of elements with at most one DAV:fork-ok
      element.

      <!ELEMENT fork-ok EMPTY>

      If a response body for a successful request is included, it MUST
      be a DAV:checkout-response XML element.

      <!ELEMENT checkout-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:must-be-checked-in): If a version-controlled resource is
      being checked out, it MUST have a DAV:checked-in property.

      (DAV:checkout-of-version-with-descendant-is-forbidden): If the
      DAV:checkout-fork property of the version being checked out is
      DAV:forbidden, the request MUST fail if a version identifies that
      version in its DAV:predecessor-set.

      (DAV:checkout-of-version-with-descendant-is-discouraged): If the
      DAV:checkout-fork property of the version being checked out is
      DAV:discouraged, the request MUST fail if a version identifies
      that version in its DAV:predecessor-set unless DAV:fork-ok is
      specified in the request body.



Clemm, et al.               Standards Track                    [Page 37]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:checkout-of-checked-out-version-is-forbidden): If the
      DAV:checkout-fork property of the version being checked out is
      DAV:forbidden, the request MUST fail if a checked-out resource
      identifies that version in its DAV:checked-out property.

      (DAV:checkout-of-checked-out-version-is-discouraged): If the
      DAV:checkout-fork property of the version being checked out is
      DAV:discouraged, the request MUST fail if a checked-out resource
      identifies that version in its DAV:checked-out property unless
      DAV:fork-ok is specified in the request body.

   Postconditions:

      (DAV:is-checked-out): The checked-out resource MUST have a
      DAV:checked-out property that identifies the DAV:checked-in
      version preceding the checkout.  The version-controlled resource
      MUST NOT have a DAV:checked-in property.

      (DAV:initialize-predecessor-set): The DAV:predecessor-set property
      of the checked-out resource MUST be initialized to be the
      DAV:checked-out version.

4.3.1 Example - CHECKOUT of a version-controlled resource

   >>REQUEST

     CHECKOUT /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 200 OK
     Cache-Control: no-cache

   In this example, the version-controlled resource /foo.html is checked
   out.

4.4 CHECKIN Method (applied to a version-controlled resource)

   A CHECKIN request can be applied to a checked-out version-controlled
   resource to produce a new version whose content and dead properties
   are copied from the checked-out resource.

   If a CHECKIN request fails, the server state preceding the request
   MUST be restored.





Clemm, et al.               Standards Track                    [Page 38]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Marshalling:

      If a request body is included, it MUST be a DAV:checkin XML
      element.

      <!ELEMENT checkin ANY>
      ANY value: A sequence of elements with at most one
      DAV:keep-checked-out element and at most one DAV:fork-ok element.

      <!ELEMENT keep-checked-out EMPTY>
      <!ELEMENT fork-ok EMPTY>

      If a response body for a successful request is included, it MUST
      be a DAV:checkin-response XML element.

      <!ELEMENT checkin-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:must-be-checked-out): The request-URL MUST identify a
      resource with a DAV:checked-out property.

      (DAV:version-history-is-tree) The versions identified by the
      DAV:predecessor-set of the checked-out resource MUST be
      descendants of the root version of the version history for the
      DAV:checked-out version.

      (DAV:checkin-fork-forbidden): A CHECKIN request MUST fail if it
      would cause a version whose DAV:checkin-fork is DAV:forbidden to
      appear in the DAV:predecessor-set of more than one version.

      (DAV:checkin-fork-discouraged): A CHECKIN request MUST fail if it
      would cause a version whose DAV:checkin-fork is DAV:discouraged to
      appear in the DAV:predecessor-set of more than one version, unless
      DAV:fork-ok is specified in the request body.

   Postconditions:

      (DAV:create-version): The request MUST have created a new version
      in the version history of the DAV:checked-out version.  The
      request MUST have allocated a distinct new URL for the new








Clemm, et al.               Standards Track                    [Page 39]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      version, and that URL MUST NOT ever identify any resource other
      than that version. The URL for the new version MUST be returned in
      a Location response header.

      (DAV:initialize-version-content-and-properties): The content, dead
      properties, DAV:resourcetype, and DAV:predecessor-set of the new
      version MUST be copied from the checked-out resource.  The
      DAV:version-name of the new version MUST be set to a server-
      defined value distinct from all other DAV:version-name values of
      other versions in the same version history.

      (DAV:checked-in): If the request-URL identifies a version-
      controlled resource and DAV:keep-checked-out is not specified in
      the request body, the DAV:checked-out property of the version-
      controlled resource MUST have been removed and a DAV:checked-in
      property that identifies the new version MUST have been added.

      (DAV:keep-checked-out): If DAV:keep-checked-out is specified in
      the request body, the DAV:checked-out property of the checked-out
      resource MUST have been updated to identify the new version.

4.4.1 Example - CHECKIN

   >>REQUEST

     CHECKIN /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 201 Created
     Location: http://repo.webdav.org/his/23/ver/32
     Cache-Control: no-cache

   In this example, version-controlled resource /foo.html is checked in,
   and a new version is created at http://repo.webdav.org/his/23/ver/32.

4.5 UNCHECKOUT Method

   An UNCHECKOUT request can be applied to a checked-out version-
   controlled resource to cancel the CHECKOUT and restore the pre-
   CHECKOUT state of the version-controlled resource.

   If an UNCHECKOUT request fails, the server MUST undo any partial
   effects of the UNCHECKOUT request.





Clemm, et al.               Standards Track                    [Page 40]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Marshalling:

      If a request body is included, it MUST be a DAV:uncheckout XML
      element.

      <!ELEMENT uncheckout ANY>

      If a response body for a successful request is included, it MUST
      be a DAV:uncheckout-response XML element.

      <!ELEMENT uncheckout-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:must-be-checked-out-version-controlled-resource): The
      request-URL MUST identify a version-controlled resource with a
      DAV:checked-out property.

   Postconditions:

      (DAV:cancel-checked-out): The value of the DAV:checked-in property
      is that of the DAV:checked-out property prior to the request, and
      the DAV:checked-out property has been removed.

      (DAV:restore-content-and-dead-properties): The content and dead
      properties of the version-controlled resource are copies of its
      DAV:checked-in version.

4.5.1 Example - UNCHECKOUT

   >>REQUEST

     UNCHECKOUT /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 200 OK
     Cache-Control: no-cache

   In this example, the content and dead properties of the version-
   controlled resource identified by http://www.webdav.org/foo.html are
   restored to their values preceding the most recent CHECKOUT of that
   version-controlled resource.




Clemm, et al.               Standards Track                    [Page 41]



RFC 3253            Versioning Extensions to WebDAV           March 2002


4.6 Additional OPTIONS Semantics

   If a server supports the checkout-in-place feature, it MUST include
   "checkout-in-place" as a field in the DAV response header from an
   OPTIONS request on any resource that supports any versioning
   properties, reports, or methods.

5  Version-History Feature

   It is often useful to have access to a version history even after all
   version-controlled resources for that version history have been
   deleted.  A server can provide this functionality by supporting
   version history resources.  A version history resource is a resource
   that exists in a server defined namespace and therefore is unaffected
   by any deletion or movement of version-controlled resources.  A
   version history resource is an appropriate place to add a property
   that logically applies to all states of a resource.  The DAV:expand-
   property report (see Section 3.8) can be applied to the DAV:version-
   set of a version history resource to provide a variety of useful
   reports on all versions in that version history.

5.1 Version History Properties

   The DAV:resourcetype of a version history MUST be DAV:version-
   history.

   The version-history feature introduces the following REQUIRED
   properties for a version history.

5.1.1 DAV:version-set (protected)

   This property identifies each version of this version history.

   <!ELEMENT version-set (href+)>

5.1.2 DAV:root-version (computed)

   This property identifies the root version of this version history.

   <!ELEMENT root-version (href)>

5.2 Additional Version-Controlled Resource Properties

   The version-history feature introduces the following REQUIRED
   property for a version-controlled resource.






Clemm, et al.               Standards Track                    [Page 42]



RFC 3253            Versioning Extensions to WebDAV           March 2002


5.2.1 DAV:version-history (computed)

   This property identifies the version history resource for the
   DAV:checked-in or DAV:checked-out version of this version-controlled
   resource.

   <!ELEMENT version-history (href)>

5.3 Additional Version Properties

   The version-history feature introduces the following REQUIRED
   property for a version.

5.3.1 DAV:version-history (computed)

   This property identifies the version history that contains this
   version.

   <!ELEMENT version-history (href)>

5.4 DAV:locate-by-history Report

   Many properties identify a version from some version history.  It is
   often useful to be able to efficiently locate a version-controlled
   resource for that version history.  The DAV:locate-by-history report
   can be applied to a collection to locate the collection member that
   is a version-controlled resource for a specified version history
   resource.

   Marshalling:

      The request body MUST be a DAV:locate-by-history XML element.

      <!ELEMENT locate-by-history (version-history-set, prop)>
      <!ELEMENT version-history-set (href+)>
      prop: see RFC 2518, Section 12.11

      The response body for a successful request MUST be a
      DAV:multistatus XML element containing every version-controlled
      resource that is a member of the collection identified by the
      request-URL, and whose DAV:version-history property identifies one
      of the version history resources identified by the request body.
      The DAV:prop element in the request body identifies which
      properties should be reported in the DAV:prop elements in the
      response body.






Clemm, et al.               Standards Track                    [Page 43]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Preconditions:

      (DAV:must-be-version-history): Each member of the DAV:version-
      history-set element in the request body MUST identify a version
      history resource.

5.4.1 Example - DAV:locate-by-history Report

   >>REQUEST

     REPORT /ws/public HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:locate-by-history xmlns:D="DAV:">
       <D:version-history-set>
         <D:href>http://repo.webdav.org/his/23</D:href>
         <D:href>http://repo.webdav.org/his/84</D:href>
         <D:href>http://repo.webdav.org/his/129</D:href>
       <D:version-history-set/>
       <D:prop>
         </D:version-history>
       </D:prop>
     </D:locate-by-history>

   >>RESPONSE

     HTTP/1.1 207 Multi-Status
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:multistatus xmlns:D="DAV:">
       <D:response>
         <D:href>http://www.webdav.org/ws/public/x/test.html</D:href>
         <D:propstat>
           <D:prop>
             <D:version-history>
               <D:href>http://repo.webdav.org/his/23</D:href>
             </D:version-history>
           </D:prop>
           <D:status>HTTP/1.1 200 OK</D:status>
         </D:propstat>
       </D:response>
     </D:multistatus>




Clemm, et al.               Standards Track                    [Page 44]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In this example, there is only one version-controlled member of
   /ws/public that is a version-controlled resource for one of the three
   specified version history resources.  In particular,
   /ws/public/x/test.html is the version-controlled resource for
   http://repo.webdav.org/his/23.

5.5 Additional OPTIONS Semantics

   If the server supports the version-history feature, it MUST include
   "version-history" as a field in the DAV response header from an
   OPTIONS request on any resource that supports any versioning
   properties, reports, or methods.

   A DAV:version-history-collection-set element MAY be included in the
   request body to identify collections that may contain version history
   resources.

   Additional Marshalling:

      If an XML request body is included, it MUST be a DAV:options XML
      element.

      <!ELEMENT options ANY>
      ANY value: A sequence of elements with at most one
      DAV:version-history-collection-set element.

      If an XML response body for a successful request is included, it
      MUST be a DAV:options-response XML element.

      <!ELEMENT options-response ANY>
      ANY value: A sequence of elements with at most one
      DAV:version-history-collection-set element.

      <!ELEMENT version-history-collection-set (href*)>

      If DAV:version-history-collection-set is included in the request
      body, the response body for a successful request MUST contain a
      DAV:version-history-collection-set element identifying collections
      that may contain version histories.  An identified collection MAY
      be the root collection of a tree of collections, all of which may
      contain version histories.  Since different servers can control
      different parts of the URL namespace, different resources on the
      same host MAY have different DAV:version-history-collection-set
      values.  The identified collections MAY be located on different
      hosts from the resource.






Clemm, et al.               Standards Track                    [Page 45]



RFC 3253            Versioning Extensions to WebDAV           March 2002


5.6 Additional DELETE Semantics

   Additional Postconditions:

      (DAV:delete-version-set): If the request deleted a version
      history, the request MUST have deleted all versions in the
      DAV:version-set of that version history, and MUST have satisfied
      the postconditions for version deletion (see Section 3.13).

      (DAV:version-history-has-root): If the request deleted the root
      version of a version history, the request MUST have updated the
      DAV:root-version of the version history to refer to another
      version that is an ancestor of all other remaining versions in
      that version history.  A result of this postcondition is that
      every version history will have at least one version, and the only
      way to delete all versions is to delete the version history
      resource.

5.7 Additional COPY Semantics

   Additional Preconditions:

      (DAV:cannot-copy-history): If the request-URL identifies a version
      history, the request MUST fail.  In order to create another
      version history whose versions have the same content and dead
      properties, the appropriate sequence of VERSION-CONTROL, CHECKOUT,
      PUT, PROPPATCH, and CHECKIN requests must be made.

5.8 Additional MOVE Semantics

   Additional Preconditions:

      (DAV:cannot-rename-history): If the request-URL identifies a
      version history, the request MUST fail.

5.9 Additional VERSION-CONTROL Semantics

   Additional Postconditions:

      (DAV:new-version-history): If the request created a new version
      history, the request MUST have allocated a new server-defined URL
      for that version history that MUST NOT have previously identified
      any other resource, and MUST NOT ever identify a resource other
      than this version history.







Clemm, et al.               Standards Track                    [Page 46]



RFC 3253            Versioning Extensions to WebDAV           March 2002


5.10 Additional CHECKIN Semantics

   Additional Postconditions:

      (DAV:add-to-history): A URL for the new version resource MUST have
      been added to the DAV:version-set of the version history of the
      DAV:checked-out version.

6  Workspace Feature

   In order to allow multiple users to work concurrently on adding
   versions to the same version history, it is necessary to allocate on
   the server multiple checked-out resources for the same version
   history.  Even if only one user is making changes to a resource, that
   user will sometimes wish to create a "private" version, and then to
   expose that version at a later time.  One way to provide this
   functionality depends on the client keeping track of its current set
   of checked-out resources.  This is the working-resource feature
   defined in Section 8.  The other way to provide this functionality
   avoids the need for persistent state on the client, and instead has
   the server maintain a human meaningful namespace for related sets of
   checked-out resources.  This is the workspace feature defined in this
   section.

   The workspace feature introduces a "workspace resource".  A workspace
   resource is a collection whose members are related version-controlled
   and non-version-controlled resources.  Multiple workspaces may be
   used to expose different versions and configurations of a set of
   version-controlled resources concurrently.  In order to make changes
   to a version-controlled resource in one workspace visible in another
   workspace, that version-controlled resource must be checked in, and
   then the corresponding version-controlled resource in the other
   workspace can be updated to display the content and dead properties
   of the new version.

   In order to ensure unambiguous merging (see Section 11) and
   baselining (see Section 12) semantics, a workspace may contain at
   most one version-controlled resource for a given version history.
   This is required for unambiguous merging because the MERGE method
   must identify which version-controlled resource is to be the merge
   target of a given version.  This is required for unambiguous
   baselining because a baseline can only select one version for a given
   version-controlled resource.

   Initially, an empty workspace can be created.  Non-version-controlled
   resources can then be added to the workspace with standard WebDAV
   requests such as PUT and MKCOL.  Version-controlled resources can be
   added to the workspace with VERSION-CONTROL requests.  If the



Clemm, et al.               Standards Track                    [Page 47]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   baseline feature is supported, collections in the workspace can be
   placed under baseline control, and then initialized by existing
   baselines.

6.1 Workspace Properties

   The workspace feature introduces the following REQUIRED property for
   a workspace.

6.1.1 DAV:workspace-checkout-set (computed)

   This property identifies each checked-out resource whose
   DAV:workspace property identifies this workspace.

   <!ELEMENT workspace-checkout-set (href*)>

6.2 Additional Resource Properties

   The workspace feature introduces the following REQUIRED property for
   a WebDAV resource.

6.2.1 DAV:workspace (protected)

   The DAV:workspace property of a workspace resource MUST identify
   itself.  The DAV:workspace property of any other type of resource
   MUST be the same as the DAV:workspace of its parent collection.

   <!ELEMENT workspace (href)>

6.3 MKWORKSPACE Method

   A MKWORKSPACE request creates a new workspace resource.  A server MAY
   restrict workspace creation to particular collections, but a client
   can determine the location of these collections from a
   DAV:workspace-collection-set OPTIONS request (see Section 6.4).

   If a MKWORKSPACE request fails, the server state preceding the
   request MUST be restored.

   Marshalling:

      If a request body is included, it MUST be a DAV:mkworkspace XML
      element.

      <!ELEMENT mkworkspace ANY>

      If a response body for a successful request is included, it MUST
      be a DAV:mkworkspace-response XML element.



Clemm, et al.               Standards Track                    [Page 48]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      <!ELEMENT mkworkspace-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:resource-must-be-null): A resource MUST NOT exist at the
      request-URL.

      (DAV:workspace-location-ok): The request-URL MUST identify a
      location where a workspace can be created.

   Postconditions:

      (DAV:initialize-workspace): A new workspace exists at the
      request-URL.  The DAV:resourcetype of the workspace MUST be
      DAV:collection.  The DAV:workspace of the workspace MUST identify
      the workspace.

6.3.1 Example - MKWORKSPACE

   >>REQUEST

     MKWORKSPACE /ws/public HTTP/1.1
     Host: www.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 201 Created
     Cache-Control: no-cache

   In this example, a new workspace is created at
   http://www.webdav.org/ws/public.

6.4 Additional OPTIONS Semantics

   If a server supports the workspace feature, it MUST include
   "workspace" as a field in the DAV response header from an OPTIONS
   request on any resource that supports any versioning properties,
   reports, or methods.

   If a server supports the workspace feature, it MUST also support the
   checkout-in-place feature and the version-history feature.

   A DAV:workspace-collection-set element MAY be included in the request
   body to identify collections that may contain workspace resources.




Clemm, et al.               Standards Track                    [Page 49]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Marshalling:

      If an XML request body is included, it MUST be a DAV:options XML
      element.

      <!ELEMENT options ANY>
      ANY value: A sequence of elements with at most one
      DAV:workspace-collection-set element.

      If an XML response body for a successful request is included, it
      MUST be a DAV:options-response XML element.

      <!ELEMENT options-response ANY>
      ANY value: A sequence of elements with at most one
      DAV:workspace-collection-set element.

      <!ELEMENT workspace-collection-set (href*)>

      If DAV:workspace-collection-set is included in the request body,
      the response body for a successful request MUST contain a
      DAV:workspace-collection-set element identifying collections that
      may contain workspaces.  An identified collection MAY be the root
      collection of a tree of collections, all of which may contain
      workspaces.  Since different servers can control different parts
      of the URL namespace, different resources on the same host MAY
      have different DAV:workspace-collection-set values.  The
      identified collections MAY be located on different hosts from the
      resource.























Clemm, et al.               Standards Track                    [Page 50]



RFC 3253            Versioning Extensions to WebDAV           March 2002


6.4.1 Example - OPTIONS

   >>REQUEST

     OPTIONS /doc HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:options xmlns:D="DAV:">
       <D:version-history-collection-set/>
       <D:workspace-collection-set/>
     </D:options>

   >>RESPONSE

     HTTP/1.1 200 OK
     DAV: 1
     DAV: version-control,checkout-in-place,version-history,workspace
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:options-response xmlns:D="DAV:">
       <D:version-history-collection-set>
         <D:href>http://repo.webdav.org/his</D:href>
       </D:version-history-collection-set>
       <D:workspace-collection-set>
         <D:href>http://www.webdav.org/public/ws</D:href>
         <D:href>http://www.webdav.org/private/ws</D:href>
       </D:workspace-collection-set>
     </D:options-response>

   In this example, the server indicates that it provides Class 1 DAV
   support and basic-server-workspace versioning support.  In addition,
   the server indicates the requested locations of the version history
   resources and the workspace resources.

6.5 Additional DELETE Semantics

   Additional Postconditions:

      (DAV:delete-workspace-members): If a workspace is deleted, any
      resource that identifies that workspace in its DAV:workspace
      property MUST be deleted.





Clemm, et al.               Standards Track                    [Page 51]



RFC 3253            Versioning Extensions to WebDAV           March 2002


6.6 Additional MOVE Semantics

   Additional Postconditions:

      (DAV:workspace-member-moved): If the request-URL did not identify
      a workspace, the DAV:workspace of the destination MUST have been
      updated to have the same value as the DAV:workspace of the parent
      collection of the destination.

      (DAV:workspace-moved): If the request-URL identified a workspace,
      any reference to that workspace in a DAV:workspace property MUST
      have been updated to refer to the new location of that workspace.

6.7 Additional VERSION-CONTROL Semantics

   A VERSION-CONTROL request can be used to create a new version-
   controlled resource for an existing version history.  This allows the
   creation of version-controlled resources for the same version history
   in multiple workspaces.

   Additional Marshalling:

      <!ELEMENT version-control ANY>
      ANY value: A sequence of elements with at most one DAV:version
      element.

      <!ELEMENT version (href)>

   Additional Preconditions:

      (DAV:cannot-add-to-existing-history): If the DAV:version-control
      request body element contains a DAV:version element, the request-
      URL MUST NOT identify a resource.

      (DAV:must-be-version): The DAV:href of the DAV:version element
      MUST identify a version.

      (DAV:one-version-controlled-resource-per-history-per-workspace):
      If the DAV:version-control request body specifies a version, and
      if the request-URL is a member of a workspace, then there MUST NOT
      already be a version-controlled member of that workspace whose
      DAV:checked-in or DAV:checked-out property identifies any version
      from the version history of the version specified in the request
      body.







Clemm, et al.               Standards Track                    [Page 52]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Postconditions:

      (DAV:new-version-controlled-resource): If the request-URL did NOT
      identify a resource, a new version-controlled resource exists at
      the request-URL whose content and dead properties are initialized
      by those of the version in the request body, and whose
      DAV:checked-in property identifies that version.

6.7.1 Example - VERSION-CONTROL (using an existing version history)

   >>REQUEST

     VERSION-CONTROL /ws/public/bar.html HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:version-control xmlns:D="DAV:">
       <D:version>
         <D:href>http://repo.webdav.org/his/12/ver/V3</D:href>
       </D:version>
     </D:version-control>

   >>RESPONSE

     HTTP/1.1 201 Created
     Cache-Control: no-cache

   In this example, a new version-controlled resource is created at
   /ws/public/bar.html.  The content and dead properties of the new
   version-controlled resource are initialized to be the same as those
   of the version identified by http://repo.webdav.org/his/12/ver/V3.

7  UPDATE Feature

   The update feature provides a mechanism for changing the state of a
   checked-in version-controlled resource to be that of another version
   from the version history of that resource.

7.1 UPDATE Method

   The UPDATE method modifies the content and dead properties of a
   checked-in version-controlled resource (the "update target") to be
   those of a specified version (the "update source") from the version
   history of that version-controlled resource.





Clemm, et al.               Standards Track                    [Page 53]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The response to an UPDATE request identifies the resources modified
   by the request, so that a client can efficiently update any cached
   state it is maintaining.  Extensions to the UPDATE method allow
   multiple resources to be modified from a single UPDATE request (see
   Section 12.13).

   Marshalling:

      The request body MUST be a DAV:update element.

      <!ELEMENT update ANY>
      ANY value: A sequence of elements with at most one DAV:version
      element and at most one DAV:prop element.
      <!ELEMENT version (href)>
      prop: see RFC 2518, Section 12.11

      The response for a successful request MUST be a 207 Multi-Status,
      where the DAV:multistatus XML element in the response body
      identifies all resources that have been modified by the request.

      multistatus: see RFC 2518, Section 12.9

      The response MUST include a Cache-Control:no-cache header.

   Postconditions:

      (DAV:update-content-and-properties): If the DAV:version element in
      the request body identified a version that is in the same version
      history as the DAV:checked-in version of a version-controlled
      resource identified by the request-URL, then the content and dead
      properties of that version-controlled resource MUST be the same as
      those of the version specified by the DAV:version element, and the
      DAV:checked-in property of the version-controlled resource MUST
      identify that version.  The request-URL MUST appear in a
      DAV:response element in the response body.

      (DAV:report-properties): If DAV:prop is specified in the request
      body, the properties specified in the DAV:prop element MUST be
      reported in the DAV:response elements in the response body.












Clemm, et al.               Standards Track                    [Page 54]



RFC 3253            Versioning Extensions to WebDAV           March 2002


7.1.1 Example - UPDATE

   >>REQUEST

     UPDATE /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:update xmlns:D="DAV:">
       <D:version>
         <D:href>http://repo.webdav.org/his/23/ver/33</D:href>
       </D:version>
     </D:update>

   >>RESPONSE

     HTTP/1.1 207 Multi-Status
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx
     Cache-Control: no-cache

     <?xml version="1.0" encoding="utf-8" ?>
     <D:multistatus xmlns:D="DAV:">
       <D:response>
         <D:href>http://www.webdav.org/foo.html</D:href>
         <D:status>HTTP/1.1 200 OK</D:status>
       </D:response>

   In this example, the content and dead properties of
   http://repo.webdav.org/his/23/ver/33 are copied to the version-
   controlled resource /foo.html, and the DAV:checked-in property of
   /foo.html is updated to refer to
   http://repo.webdav.org/his/23/ver/33.

7.2 Additional OPTIONS Semantics

   If the server supports the update feature, it MUST include "update"
   as a field in the DAV response header from an OPTIONS request on any
   resource that supports any versioning properties, reports, or
   methods.









Clemm, et al.               Standards Track                    [Page 55]



RFC 3253            Versioning Extensions to WebDAV           March 2002


8  Label Feature

   A version "label" is a string that distinguishes one version in a
   version history from all other versions in that version history.  A
   label can automatically be assigned by a server, or it can be
   assigned by a client in order to provide a meaningful name for that
   version.  A given version label can be assigned to at most one
   version of a given version history, but client assigned labels can be
   reassigned to another version at any time.  Note that although a
   given label can be applied to at most one version from the same
   version history, the same label can be applied to versions from
   different version histories.

   For certain methods, if the request-URL identifies a version-
   controlled resource, a label can be specified in a Label request
   header (see Section 8.3) to cause the method to be applied to the
   version selected by that label from the version history of that
   version-controlled resource.

8.1 Additional Version Properties

   The label feature introduces the following REQUIRED property for a
   version.

8.1.1 DAV:label-name-set (protected)

   This property contains the labels that currently select this version.

   <!ELEMENT label-name-set (label-name*)>
   <!ELEMENT label-name (#PCDATA)>
   PCDATA value: string

8.2 LABEL Method

   A LABEL request can be applied to a version to modify the labels that
   select that version.  The case of a label name MUST be preserved when
   it is stored and retrieved.  When comparing two label names to decide
   if they match or not, a server SHOULD use a case-sensitive URL-
   escaped UTF-8 encoded comparison of the two label names.

   If a LABEL request is applied to a checked in version-controlled
   resource, the operation MUST be applied to the DAV:checked-in version
   of that version-controlled resource.








Clemm, et al.               Standards Track                    [Page 56]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Marshalling:

      The request body MUST be a DAV:label element.

      <!ELEMENT label ANY>
      ANY value: A sequence of elements with at most one DAV:add,
      DAV:set, or DAV:remove element.

      <!ELEMENT add (label-name)>
      <!ELEMENT set (label-name)>
      <!ELEMENT remove (label-name)>
      <!ELEMENT label-name (#PCDATA)>
      PCDATA value: string

      The request MAY include a Label header.

      The request MAY include a Depth header.  If no Depth header is
      included, Depth:0 is assumed.  Standard depth semantics apply, and
      the request is applied to the collection identified by the
      request-URL and to all members of the collection that satisfy the
      Depth value.  If a Depth header is included and the request fails
      on any resource, the response MUST be a 207 Multi-Status that
      identifies all resources for which the request has failed.

      If a response body for a successful request is included, it MUST
      be a DAV:label-response XML element.

      <!ELEMENT label-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:must-be-checked-in): If the request-URL identifies a
      version-controlled resource, the version-controlled resource MUST
      be checked in.

      (DAV:must-select-version-in-history): If a Label request header is
      included and the request-URL identifies a version-controlled
      resource, the specified label MUST select a version in the version
      history of the version-controlled resource.

      (DAV:add-must-be-new-label): If DAV:add is specified in the
      request body, the specified label MUST NOT appear in the
      DAV:label-name-set of any version in the version history of that
      version-controlled resource.





Clemm, et al.               Standards Track                    [Page 57]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:label-must-exist): If DAV:remove is specified in the request
      body, the specified label MUST appear in the DAV:label-name-set of
      that version.

   Postconditions:

      (DAV:add-or-set-label): If DAV:add or DAV:set is specified in the
      request body, the specified label MUST appear in the DAV:label-
      name-set of the specified version, and MUST NOT appear in the
      DAV:label-name-set of any other version in the version history of
      that version.

      (DAV:remove-label): If DAV:remove is specified in the request
      body, the specified label MUST NOT appear in the DAV:label-name-
      set of any version in the version history of that version.

8.2.1 Example - Setting a label

   >>REQUEST

     LABEL /foo.html HTTP/1.1
     Host: www.webdav.org
     Content-type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:label xmlns:D="DAV:">
       <D:set>
         <D:label-name>default</D:label-name>
       </D:set>
     </D:label>

   >>RESPONSE

     HTTP/1.1 200 OK
     Cache-Control: no-cache

   In this example, the label "default" is applied to the DAV:checked-in
   version of /foo.html.

8.3 Label Header

   For certain methods (e.g. GET, PROPFIND), if the request-URL
   identifies a version-controlled resource, a label can be specified in
   a Label request header to cause the method to be applied to the
   version selected by that label from the version history of that
   version-controlled resource.




Clemm, et al.               Standards Track                    [Page 58]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The value of a label header is the name of a label, encoded using
   URL-escaped UTF-8.  For example, the label "release B.3" is
   identified by the following header:

     Label: release%20B.3

   A Label header MUST have no effect on a request whose request-URL
   does not identify a version-controlled resource.  In particular, it
   MUST have no effect on a request whose request-URL identifies a
   version or a version history.

   A server MUST return an HTTP-1.1 Vary header containing Label in a
   successful response to a cacheable request (e.g., GET) that includes
   a Label header.

8.4 Additional OPTIONS Semantics

   If the server supports the label feature, it MUST include "label" as
   a field in the DAV response header from an OPTIONS request on any
   resource that supports any versioning properties, reports, or
   methods.

8.5 Additional GET Semantics

   Additional Marshalling:

      The request MAY include a Label header.

   Additional Preconditions:

      (DAV:must-select-version-in-history): If a Label request header is
      included and the request-URL identifies a version-controlled
      resource, the specified label MUST select a version in the version
      history of the version-controlled resource.

   Additional Postconditions:

      (DAV:apply-request-to-labeled-version): If the request-URL
      identifies a version-controlled resource and a Label request
      header is included, the response MUST contain the content of the
      specified version rather than that of the version-controlled
      resource.

8.6 Additional PROPFIND Semantics

   Additional Marshalling:

      The request MAY include a Label header.



Clemm, et al.               Standards Track                    [Page 59]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Preconditions:

      (DAV:must-select-version-in-history): If a Label request header is
      included and the request-URL identifies a version-controlled
      resource, the specified label MUST select a version in the version
      history of the version-controlled resource.

   Additional Postconditions:

      (DAV:apply-request-to-labeled-version): If the request-URL
      identifies a version-controlled resource and a Label request
      header is included, the response MUST contain the properties of
      the specified version rather than that of the version-controlled
      resource.

8.7 Additional COPY Semantics

   Additional Marshalling:

      The request MAY include a Label header.

   Additional Preconditions:

      (DAV:must-select-version-in-history): If a Label request header is
      included and the request-URL identifies a version-controlled
      resource, the specified label MUST select a version in the version
      history of the version-controlled resource.

   Additional Postconditions:

      (DAV:apply-request-to-labeled-version): If the request-URL
      identifies a version-controlled resource and a Label request
      header is included, the request MUST have copied the properties
      and content of the specified version rather than that of the
      version-controlled resource.

8.8 Additional CHECKOUT Semantics

   If the server supports the working-resource option, a LABEL header
   may be included to check out the version selected by the specified
   label.

   Additional Marshalling:

      The request MAY include a Label header.






Clemm, et al.               Standards Track                    [Page 60]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Preconditions:

      (DAV:must-select-version-in-history): If a Label request header is
      included and the request-URL identifies a version-controlled
      resource, the specified label MUST select a version in the version
      history of the version-controlled resource.

      (DAV:must-not-have-label-and-apply-to-version): If a Label request
      header is included, the request body MUST NOT contain a
      DAV:apply-to-version element.

   Additional Postconditions:

      (DAV:apply-request-to-labeled-version): If the request-URL
      identifies a checked-in version-controlled resource, and a Label
      request header is included, the CHECKOUT MUST have been applied to
      the version selected by the specified label, and not to the
      version-controlled resource itself.

8.9 Additional UPDATE Semantics

   If the request body of an UPDATE request contains a DAV:label-name
   element, the update target is the resource identified by the
   request-URL, and the update source is the version selected by the
   specified label from the version history of the update target.

   Additional Marshalling:

      <!ELEMENT update ANY>
      ANY value: A sequence of elements with at most one DAV:label-name
      or DAV:version element (but not both).
      <!ELEMENT label-name (#PCDATA)>
      PCDATA value: string

      The request MAY include a Depth header.  If no Depth header is
      included, Depth:0 is assumed.  Standard depth semantics apply, and
      the request is applied to the collection identified by the
      request-URL and to all members of the collection that satisfy the
      Depth value.  If a Depth header is included and the request fails
      on any resource, the response MUST be a 207 Multi-Status that
      identifies all resources for which the request has failed.

   Additional Preconditions:

      (DAV:must-select-version-in-history): If the request includes a
      DAV:label-name element in the request body, the label MUST select
      a version in the version history of the version-controlled
      resource identified by the request-URL.



Clemm, et al.               Standards Track                    [Page 61]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:depth-update): If the request includes a Depth header,
      standard depth semantics apply, and the request is applied to the
      collection identified by the request-URL and to all members of the
      collection that satisfy the Depth value.  The request MUST be
      applied to a collection before being applied to any members of
      that collection, since an update of a version-controlled
      collection might change the membership of that collection.

   Additional Postconditions:

      (DAV:apply-request-to-labeled-version): If a DAV:label-name
      element appears in the request body, the content and dead
      properties of the version-controlled resource must have been
      updated to be those of the version selected by that label.

9  Working-Resource Feature

   The working-resource feature provides an alternative to the workspace
   feature for supporting parallel development.  Unlike the workspace
   feature, where the desired configuration of versions and checked-out
   resources is maintained on the server, the working-resource feature
   maintains the configuration on the client.  This simplifies the
   server implementation, but does not allow a user to access the
   configuration from clients in different physical locations, such as
   from another office, from home, or while traveling.  Another
   difference is that the workspace feature isolates clients from a
   logical change that involves renaming shared resources, until that
   logical change is complete and tested; with the working resource
   feature, all clients use a common set of shared version-controlled
   resources and every client sees the result of a MOVE as soon as it
   occurs.

   If a server supports the working-resource feature but not the
   checkout-in-place feature, a CHECKOUT request can only be used to
   create a working resource, and cannot be used to check out a
   version-controlled resource.  If a server supports the checkout-in-
   place feature, but not the working-resource feature, a CHECKOUT can
   only be used to change the state of a version-controlled resource
   from checked-in to checked-out.

9.1 Additional Version Properties

   The working-resource feature introduces the following REQUIRED
   properties for a version.

9.1.1 DAV:checkout-fork

   This property is defined in Section 4.1.1.



Clemm, et al.               Standards Track                    [Page 62]



RFC 3253            Versioning Extensions to WebDAV           March 2002


9.1.2 DAV:checkin-fork

   This property is defined in Section 4.1.2.

9.2 Working Resource Properties

   The working-resource feature introduces the following REQUIRED
   properties for a working resource.  Since a working resource is a
   checked-out resource, it also has any property defined in this
   document for a checked-out resource.

9.2.1 DAV:auto-update (protected)

   This property identifies the version-controlled resource that will be
   updated when the working resource is checked in.

   <!ELEMENT auto-update (href)>

9.2.2 DAV:checkout-fork

   This property is defined in Section 4.2.1.

9.2.3 DAV:checkin-fork

   This property is defined in Section 4.2.2.

9.3 CHECKOUT Method (applied to a version)

   A CHECKOUT request can be applied to a version to create a new
   working resource.  The content and dead properties of the working
   resource are a copy of the version that was checked out.

   Marshalling:

      If a request body is included, it MUST be a DAV:checkout XML
      element.

      <!ELEMENT checkout ANY>

      ANY value: A sequence of elements with at most one DAV:apply-to-
      version and at most one DAV:fork-ok element.

      <!ELEMENT apply-to-version EMPTY>
      <!ELEMENT fork-ok EMPTY>

      If a response body for a successful request is included,
      it MUST be a DAV:checkout-response XML element.




Clemm, et al.               Standards Track                    [Page 63]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      <!ELEMENT checkout-response ANY>

      The response MUST include a Location header.

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:checkout-of-version-with-descendant-is-forbidden): See
      Section 4.3.

      (DAV:checkout-of-version-with-descendant-is-discouraged): See
      Section 4.3.

      (DAV:checkout-of-checked-out-version-is-forbidden): See Section
      4.3.

      (DAV:checkout-of-checked-out-version-is-discouraged): See Section
      4.3.

   Postconditions:

      (DAV:create-working-resource): If the request-URL identified a
      version, the Location response header MUST contain the URL of a
      new working resource.  The DAV:checked-out property of the new
      working resource MUST identify the version that was checked out.
      The content and dead properties of the working resource MUST be
      copies of the content and dead properties of the DAV:checked-out
      version.  The DAV:predecessor-set property of the working resource
      MUST be initialized to be the version identified by the request-
      URL.  The DAV:auto-update property of the working resource MUST
      NOT exist.

      (DAV:create-working-resource-from-checked-in-version): If the
      request-URL identified a version-controlled resource, and
      DAV:apply-to-version is specified in the request body, the
      CHECKOUT is applied to the DAV:checked-in version of the version-
      controlled resource, and not the version-controlled resource
      itself.  A new working resource is created and the version-
      controlled resource remains checked-in.  The DAV:auto-update
      property of the working resource MUST identify the version-
      controlled resource.









Clemm, et al.               Standards Track                    [Page 64]



RFC 3253            Versioning Extensions to WebDAV           March 2002


9.3.1 Example - CHECKOUT of a version

   >>REQUEST

     CHECKOUT /his/12/ver/V3 HTTP/1.1
     Host: repo.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 201 Created
     Location: http://repo.webdav.org/wr/157
     Cache-Control: no-cache

   In this example, the version identified by
   http://repo.webdav.org/his/12/ver/V3 is checked out, and the new
   working resource is located at http://repo.webdav.org/wr/157.

9.4 CHECKIN Method (applied to a working resource)

   A CHECKIN request can be applied to a working resource to produce a
   new version whose content and dead properties are a copy of those of
   the working resource.  If the DAV:auto-update property of the working
   resource was set because the working resource was created by applying
   a CHECKOUT with the DAV:apply-to-version flag to a version-controlled
   resource, the CHECKIN request will also update the content and dead
   properties of that version-controlled resource to be those of the new
   version.

   Marshalling:

      If a request body is included, it MUST be a DAV:checkin XML
      element.

      <!ELEMENT checkin ANY>
      ANY value: A sequence of elements with at most one DAV:fork-ok
      element.

      <!ELEMENT fork-ok EMPTY>

      If a response body for a successful request is included, it MUST
      be a DAV:checkin-response XML element.

      <!ELEMENT checkin-response ANY>

      The response MUST include a Cache-Control:no-cache header.





Clemm, et al.               Standards Track                    [Page 65]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Preconditions:

      (DAV:must-be-checked-out): See Section 4.4.

      (DAV:version-history-is-tree) See Section 4.4.

      (DAV:checkin-fork-forbidden): See Section 4.4.

      (DAV:checkin-fork-discouraged): See Section 4.4.

      (DAV:no-overwrite-by-auto-update): If the DAV:auto-update property
      for the checked-out resource identifies a version-controlled
      resource, at least one of the versions identified by the
      DAV:predecessor-set property of the checked-out resource MUST
      identify a version that is either the same as or a descendant of
      the version identified by the DAV:checked-in property of that
      version-controlled resource.

   Postconditions:

      (DAV:create-version): See Section 4.4.

      (DAV:initialize-version-content-and-properties): See Section 4.4.

      (DAV:auto-update): If the DAV:auto-update property of the
      checked-out resource identified a version-controlled resource, an
      UPDATE request with the new version MUST have been applied to that
      version-controlled resource.

      (DAV:delete-working-resource): If the request-URL identifies a
      working resource and if DAV:keep-checked-out is not specified in
      the request body, the working resource is deleted.

9.4.1 Example - CHECKIN of a working resource

   >>REQUEST

     CHECKIN /wr/157 HTTP/1.1
     Host: repo.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 201 Created
     Location: http://repo.webdav.org/his/23/ver/15
     Cache-Control: no-cache





Clemm, et al.               Standards Track                    [Page 66]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In this example, the working resource /wr/157 checked in, and a new
   version is created at http://repo.webdav.org/his/23/ver/15.

9.5 Additional OPTIONS Semantics

   If the server supports the working-resource feature, it MUST include
   "working-resource" as a field in the DAV response header from an
   OPTIONS request on any resource that supports any versioning
   properties, reports, or methods.

9.6 Additional COPY Semantics

   Additional Postconditions:

      (DAV:copy-creates-new-resource): The result of copying a working
      resource is a new non-version-controlled resource at the
      destination of the COPY.  The new resource MAY automatically be
      put under version control, but the resulting version-controlled
      resource MUST be associated with a new version history created for
      that new version-controlled resource.

9.7 Additional MOVE Semantics

   Additional Preconditions:

      (DAV:cannot-rename-working-resource): If the request-URL
      identifies a working resource, the request MUST fail.

   Additional Postconditions:

      (DAV:update-auto-update): If the request-URL identified a
      version-controlled resource, any DAV:auto-update properties that
      identified that version-controlled resource MUST have been updated
      to contain the new location of that version-controlled resource.

10 Advanced Versioning Features

   Advanced versioning addresses the problems of parallel development
   and configuration management of multiple sets of interrelated
   resources.  Traditionally, artifacts of software development,
   including requirements, design documents, code, and test cases, have
   been a focus of configuration management.  Web sites, comprising
   multiple inter-linked resources (HTML, graphics, sound, CGI, and
   others), are another class of complex information artifacts that
   benefit from the application of configuration management.  The
   advanced versioning capabilities for coordinating concurrent change
   provide the infrastructure for efficient and controlled management of
   large evolving web sites.



Clemm, et al.               Standards Track                    [Page 67]



RFC 3253            Versioning Extensions to WebDAV           March 2002


10.1 Advanced Versioning Packages

   Although a server MAY support any combination of advanced versioning
   features, in order to minimize the complexity of a WebDAV advanced
   versioning client, a WebDAV advanced versioning server SHOULD support
   one of the following packages:

   Advanced-Server-Workspace Package: basic-server-workspace package
   plus all advanced features

   Advanced-Client-Workspace Package: basic-client-workspace package
   plus all advanced features

   The advanced-server-workspace package supports advanced versioning
   capabilities for a client with no persistent state.  The advanced-
   client-workspace package supports advanced versioning capabilities
   for a client that maintains configuration state on the client.  A
   server that supports both advanced workspace packages will
   interoperate with all versioning clients.

10.2 Advanced Versioning Terms

   The following additional terms are used by the advanced versioning
   features.

   Collection

      A "collection" is a resource whose state consists of not only
      content and properties, but also a set of named "bindings", where
      a binding identifies what RFC 2518 calls an "internal member" of
      the collection.  Note that a binding is not a resource, but rather
      is a part of the state of a collection that defines a mapping from
      a binding name (a URL segment) to a resource (an internal member
      of the collection).

   Collection Version Resource

      A "collection version resource", or simply "collection version",
      captures the dead properties of a version-controlled collection,
      as well as the names of its version-controlled bindings (see
      Section 14).  A version-controlled binding is a binding to a
      version-controlled resource.  If the checkout-in-place feature is
      supported, a collection version can be created by checking out and
      then checking in a version-controlled collection.  If the
      working-resource feature is supported, a collection version can be
      created by checking out a collection version (to create a "working
      collection") and then checking in the working collection.




Clemm, et al.               Standards Track                    [Page 68]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Configuration

      A "configuration" is a set of resources that consists of a root
      collection and all members (not just internal members) of that
      root collection that are not members of another configuration.
      The root collection is called the "configuration root", and the
      members of this set are called the "members of the configuration".
      Note that a collection (which is a single resource) is very
      different from a configuration (which is a set of resources).

   Baseline Resource

      A "baseline resource", or simply "baseline", of a collection is a
      version of the configuration that is rooted at that collection
      (see Section 12).  In particular, a baseline captures the
      DAV:checked-in version of every version-controlled member of that
      configuration.  Note that a collection version (which captures the
      state of a single resource) is very different from a collection
      baseline (which captures the state of a set of resources).

   Baseline-Controlled Collection

      A "baseline-controlled collection" is a collection from which
      baselines can be created (see Section 12).

   Version-Controlled Configuration Resource

      A "version-controlled configuration resource", or simply
      "version-controlled configuration", is a special kind of version-
      controlled resource that is associated with a baseline-controlled
      collection, and is used to create and access baselines of that
      collection (see Section 12).  When a collection is both version-
      controlled and baseline-controlled, a client can create a new
      version of the collection by checking out and checking in that
      collection, and it can create a new baseline of that collection by
      checking out and checking in the version-controlled configuration
      of that collection.

   Activity Resource

      An "activity resource", or simply "activity", is a resource that
      selects a set of versions that correspond to a single logical
      change, where the versions selected from a given version history
      form a single line of descent through that version history (see
      Section 13).






Clemm, et al.               Standards Track                    [Page 69]



RFC 3253            Versioning Extensions to WebDAV           March 2002


11 Merge Feature

   When a user wants to accept the changes (new versions) created by
   someone else, it is important not just to update the version-
   controlled resources in the user's workspace with those new versions,
   since this could result in "backing out" changes the user has made to
   those version-controlled resources.  Instead, the versions created in
   another workspace should be "merged" into the user's version-
   controlled resources.

   The version history of a version-controlled resource provides the
   information needed to determine the result of the merge.  In
   particular, the merge should select whichever version is later in the
   line of descent from the root version.  In case the versions to be
   merged are on different lines of descent (neither version is a
   descendant of the other), neither version should be selected, but
   instead, a new version should be created that contains the logical
   merge of the content and dead properties of those versions.  The
   MERGE request can be used to check out each version-controlled
   resource that requires such a merge, and set the DAV:merge-set
   property of each checked-out resource to identify the version to be
   merged.  The user is responsible for modifying the content and dead
   properties of the checked-out resource so that it represents the
   logical merge of that version, and then adding that version to the
   DAV:predecessor-set of the checked-out resource.

   If the server is capable of automatically performing the merge, it
   MAY update the content, dead properties, and DAV:predecessor-set of
   the checked-out resource itself.  Before checking in the
   automatically merged resource, the user is responsible for verifying
   that the automatic merge is correct.

11.1 Additional Checked-Out Resource Properties

   The merge feature introduces the following REQUIRED properties for a
   checked-out resource.

11.1.1 DAV:merge-set

   This property identifies each version that is to be merged into this
   checked-out resource.

   <!ELEMENT merge-set (href*)>








Clemm, et al.               Standards Track                    [Page 70]



RFC 3253            Versioning Extensions to WebDAV           March 2002


11.1.2 DAV:auto-merge-set

   This property identifies each version that the server has merged into
   this checked-out resource.  The client should confirm that the merge
   has been performed correctly before moving a URL from the DAV:auto-
   merge-set to the DAV:predecessor-set of a checked-out resource.

   <!ELEMENT auto-merge-set (href*)>

11.2 MERGE Method

   The MERGE method performs the logical merge of a specified version
   (the "merge source") into a specified version-controlled resource
   (the "merge target").  If the merge source is neither an ancestor nor
   a descendant of the DAV:checked-in or DAV:checked-out version of the
   merge target, the MERGE checks out the merge target (if it is not
   already checked out) and adds the URL of the merge source to the
   DAV:merge-set of the merge target.  It is then the client's
   responsibility to update the content and dead properties of the
   checked-out merge target so that it reflects the logical merge of the
   merge source into the current state of the merge target.  The client
   indicates that it has completed the update of the merge target, by
   deleting the merge source URL from the DAV:merge-set of the checked-
   out merge target, and adding it to the DAV:predecessor-set.  As an
   error check for a client forgetting to complete a merge, the server
   MUST fail an attempt to CHECKIN a version-controlled resource with a
   non-empty DAV:merge-set.

   When a server has the ability to automatically update the content and
   dead properties of the merge target to reflect the logical merge of
   the merge source, it may do so unless DAV:no-auto-merge is specified
   in the MERGE request body.  In order to notify the client that a
   merge source has been automatically merged, the MERGE request MUST
   add the URL of the auto-merged source to the DAV:auto-merge-set
   property of the merge target, and not to the DAV:merge-set property.
   The client indicates that it has verified that the auto-merge is
   valid, by deleting the merge source URL from the DAV:auto-merge-set,
   and adding it to the DAV:predecessor-set.

   Multiple merge sources can be specified in a single MERGE request.
   The set of merge sources for a MERGE request is determined from the
   DAV:source element of the MERGE request body as follows:

   -  If DAV:source identifies a version, that version is a merge
      source.
   -  If DAV:source identifies a version-controlled resource, the
      DAV:checked-in version of that version-controlled resource is a
      merge source.



Clemm, et al.               Standards Track                    [Page 71]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   -  If DAV:source identifies a collection, the DAV:checked-in version
      of each version-controlled resource that is a member of that
      collection is a merge source.

   The request-URL identifies the set of possible merge targets.  If the
   request-URL identifies a collection, any member of the configuration
   rooted at the request-URL is a possible merge target.  The merge
   target of a particular merge source is the version-controlled or
   checked-out resource whose DAV:checked-in or DAV:checked-out version
   is from the same version history as the merge source.  If a merge
   source has no merge target, that merge source is ignored.

   The MERGE response identifies the resources that a client must modify
   to complete the merge. It also identifies the resources modified by
   the request, so that a client can efficiently update any cached state
   it is maintaining.

   Marshalling:

      The request body MUST be a DAV:merge element.

      The set of merge sources is determined by the DAV:source element
      in the request body.

      <!ELEMENT merge ANY>
      ANY value: A sequence of elements with one DAV:source element, at
      most one DAV:no-auto-merge element, at most one DAV:no-checkout
      element, at most one DAV:prop element, and any legal set of
      elements that can occur in a DAV:checkout element.
      <!ELEMENT source (href+)>
      <!ELEMENT no-auto-merge EMPTY>
      <!ELEMENT no-checkout EMPTY>
      prop: see RFC 2518, Section 12.11

      The response for a successful request MUST be a 207 Multi-Status,
      where the DAV:multistatus XML element in the response body
      identifies all resources that have been modified by the request.

      multistatus: see RFC 2518, Section 12.9

      The response to a successful request MUST include a Location
      header containing the URL for the new version created by the
      checkin.

      The response MUST include a Cache-Control:no-cache header.






Clemm, et al.               Standards Track                    [Page 72]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Preconditions:

      (DAV:cannot-merge-checked-out-resource): The DAV:source element
      MUST NOT identify a checked-out resource.  If the DAV:source
      element identifies a collection, the collection MUST NOT have a
      member that is a checked-out resource.

      (DAV:checkout-not-allowed): If DAV:no-checkout is specified in the
      request body, it MUST be possible to perform the merge without
      checking out any of the merge targets.

      All preconditions of the CHECKOUT operation apply to the checkouts
      performed by the request.

   Postconditions:

      (DAV:ancestor-version): If a merge target is a version-controlled
      or checked-out resource whose DAV:checked-in version or
      DAV:checked-out version is the merge source or is a descendant of
      the merge source, the merge target MUST NOT have been modified by
      the MERGE.

      (DAV:descendant-version): If the merge target was a checked-in
      version-controlled resource whose DAV:checked-in version was an
      ancestor of the merge source, an UPDATE operation MUST have been
      applied to the merge target to set its content and dead properties
      to be those of the merge source.  If the UPDATE method is not
      supported, the merge target MUST have been checked out, the
      content and dead properties of the merge target MUST have been set
      to those of the merge source, and the merge source MUST have been
      added to the DAV:auto-merge-set of the merge target.  The merge
      target MUST appear in a DAV:response XML element in the response
      body.

      (DAV:checked-out-for-merge): If the merge target was a checked-in
      version-controlled resource whose DAV:checked-in version was
      neither a descendant nor an ancestor of the merge source, a
      CHECKOUT MUST have been applied to the merge target.  All XML
      elements in the DAV:merge XML element that could appear in a
      DAV:checkout XML element MUST have been used as arguments to the
      CHECKOUT request.  The merge target MUST appear in a DAV:response
      XML element in the response body.

      (DAV:update-merge-set): If the DAV:checked-out version of the
      merge target is neither equal to nor a descendant of the merge
      source, the merge source MUST be added to either the DAV:merge-set
      or the DAV:auto-merge-set of the merge target.  The merge target
      MUST appear in a DAV:response XML element in the response body.



Clemm, et al.               Standards Track                    [Page 73]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      If a merge source has been added to the DAV:auto-merge-set, the
      content and dead properties of the merge target MUST have been
      modified by the server to reflect the result of a logical merge of
      the merge source and the merge target.  If a merge source has been
      added to the DAV:merge-set, the content and dead properties of the
      merge target MUST NOT have been modified by the server.  If
      DAV:no-auto-merge is specified in the request body, the merge
      source MUST NOT have been added to the DAV:auto-merge-set.

      (DAV:report-properties): If DAV:prop is specified in the request
      body, the properties specified in the DAV:prop element MUST be
      reported in the DAV:response elements in the response body.

11.2.1 Example - MERGE

   >>REQUEST

     MERGE /ws/public HTTP/1.1
     Host: www.webdav.org
     Content-type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:merge xmlns:D="DAV:">
       <D:source>
         <D:href>http://www.webdav.org/ws/dev/sally</D:href>
       </D:source>
     </D:merge>

   >>RESPONSE

     HTTP/1.1 207 Multi-Status
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx
     Cache-Control: no-cache

     <?xml version="1.0" encoding="utf-8" ?>
     <D:multistatus xmlns:D="DAV:">
       <D:response>
   <D:href>http://www.webdav.org/ws/public/src/parse.c</D:href>
   <D:status>HTTP/1.1 200 OK</D:status>
       </D:response>
       <D:response>
   <D:href>http://www.webdav.org/ws/public/doc/parse.html</D:href>
   <D:status>HTTP/1.1 200 OK</D:status>
       </D:response>
     </D:multistatus>




Clemm, et al.               Standards Track                    [Page 74]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In this example, the DAV:checked-in versions from the workspace
   http://www.webdav.org/ws/dev/sally are merged into the version-
   controlled resources in the workspace
   http://www.webdav.org/ws/public.  The resources
   /ws/public/src/parse.c and /ws/public/doc/parse.html were modified by
   the request.

11.3 DAV:merge-preview Report

   A merge preview describes the changes that would result if the
   versions specified by the DAV:source element in the request body were
   to be merged into the resource identified by the request-URL
   (commonly, a collection).

   Marshalling:

      The request body MUST be a DAV:merge-preview XML element.

      <!ELEMENT merge-preview (source)>
      <!ELEMENT source (href)>

      The response body for a successful request MUST be a
      DAV:merge-preview-report XML element.

      <!ELEMENT merge-preview-report
       (update-preview | conflict-preview | ignore-preview)*>

      A DAV:update-preview element identifies a merge target whose
      DAV:checked-in property would change as a result of the MERGE, and
      identifies the merge source for that merge target.

      <!ELEMENT update-preview (target, version)>
      <!ELEMENT target (href)>
      <!ELEMENT version (href)>

      A DAV:conflict-preview element identifies a merge target that
      requires a merge.

      <!ELEMENT conflict-preview (target, common-ancestor, version)>

      A DAV:common-ancestor element identifies the version that is a
      common ancestor of both the merge source and the DAV:checked-in or
      DAV:checked-out version of the merge target.

      <!ELEMENT common-ancestor (href)>

      A DAV:ignore-preview element identifies a version that has no
      merge target and therefore would be ignored by the merge.



Clemm, et al.               Standards Track                    [Page 75]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      <!ELEMENT ignore-preview (version)>

11.3.1 Example - DAV:merge-preview Report

   >>REQUEST

     REPORT /ws/public HTTP/1.1
     Host: www.webdav.org
     Content-type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:merge-preview xmlns:D="DAV:">
       <D:source>
         <D:href>http://www.webdav.org/ws/dev/fred</D:href>
       </D:source>
     </D:merge-preview>

   >>RESPONSE

     HTTP/1.1 200 OK
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:merge-preview-report xmlns:D="DAV:">
       <D:conflict-preview>
         <D:target>
           <D:href>http://www.webdav.org/ws/public/foo.html</D:href>
         </D:target>
         <D:common-ancestor>
           <D:href>http://repo.webdav.org/his/23/ver/18</D:href>
         </D:common-ancestor>
         <D:version>
           <D:href>http://repo.webdav.org/his/23/ver/42</D:href>
         </D:version>
       </D:conflict-preview>
       <D:update-preview>
         <D:target>
           <D:href>http://www.webdav.org/ws/public/bar.html</D:href>
         </D:target>
         <D:version>
           <D:href>http://www.repo/his/42/ver/3</D:href>
         </D:version>
       </D:update-preview>
     </D:merge-preview-report>





Clemm, et al.               Standards Track                    [Page 76]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In this example, the merge preview report indicates that version
   /his/23/ver/42 would be merged in /ws/public/foo.html, and version
   /his/42/ver/3 would update /ws/public/bar.html if the workspace
   http://www.webdav.org/ws/dev/fred was merged into the workspace
   http://www.webdav.org/ws/public.

11.4 Additional OPTIONS Semantics

   If the server supports the merge feature, it MUST include "merge" as
   a field in the DAV response header from an OPTIONS request on any
   resource that supports any versioning properties, reports, or
   methods.

11.5 Additional DELETE Semantics

   Additional Postconditions:

      (DAV:delete-version-reference): If a version is deleted, any
      reference to that version in a DAV:merge-set or DAV:auto-merge-set
      property MUST be removed.

11.6 Additional CHECKIN Semantics

   Additional Preconditions:

      (DAV:merge-must-be-complete): The DAV:merge-set and DAV:auto-
      merge-set of the checked-out resource MUST be empty or not exist.

12 Baseline Feature

   A configuration is a set of resources that consists of a root
   collection and all members of that root collection except those
   resources that are members of another configuration.  A configuration
   that contains a large number of resources can consume a large amount
   of space on a server.  This can make it prohibitively expensive to
   remember the state of an existing configuration by creating a
   Depth:infinity copy of its root collection.

   A baseline is a version resource that captures the state of each
   version-controlled member of a configuration.  A baseline history is
   a version history whose versions are baselines.  New baselines are
   created by checking out and then checking in a special kind of
   version-controlled resource called a version-controlled
   configuration.

   A collection that is under baseline control is called a baseline-
   controlled collection.  In order to allow efficient baseline
   implementation, the state of a baseline of a collection is limited to



Clemm, et al.               Standards Track                    [Page 77]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   be a set of versions and their names relative to the collection, and
   the operations on a baseline are limited to the creation of a
   baseline from a collection, and restoring or merging the baseline
   back into a collection.  A server MAY automatically put a collection
   under baseline control when it is created, or a client can use the
   BASELINE-CONTROL method to put a specified collection under baseline
   control.

   As a configuration gets large, it is often useful to break it up into
   a set of smaller configurations that form the logical "components" of
   that configuration.  In order to capture the fact that a baseline of
   a configuration is logically extended by a component configuration
   baseline, the component configuration baseline is captured as a
   "subbaseline" of the baseline.

   The root collection of a configuration is unconstrained with respect
   to its relationship to the root collection of any of its components.
   In particular, the root collection of a configuration can have a
   member that is the root collection of one of its components (e.g.,
   configuration /sys/x can have a component /sys/x/foo), can be a
   member of the root collection of one of its components (e.g.,
   configuration /sys/y/z can have a component /sys/y), or neither
   (e.g., configuration /sys/x can have a component /comp/bar).

12.1 Version-Controlled Configuration Properties

   Since a version-controlled configuration is a version-controlled
   resource, it has all the properties of a version-controlled resource.
   In addition, the baseline feature introduces the following REQUIRED
   property for a version-controlled configuration.

12.1.1 DAV:baseline-controlled-collection (protected)

   This property identifies the collection that contains the version-
   controlled resources whose DAV:checked-in versions are being tracked
   by this version-controlled configuration.  The DAV:version-
   controlled-configuration of the DAV:baseline-controlled-collection of
   a version-controlled configuration MUST identify that version-
   controlled configuration.

   <!ELEMENT baseline-controlled-collection (href)>

12.2 Checked-Out Configuration Properties

   Since a checked-out configuration is a checked-out resource, it has
   all the properties of a checked-out resource.  In addition, the
   baseline feature introduces the following REQUIRED property for a
   checked-out configuration.



Clemm, et al.               Standards Track                    [Page 78]



RFC 3253            Versioning Extensions to WebDAV           March 2002


12.2.1 DAV:subbaseline-set

   This property determines the DAV:subbaseline-set property of the
   baseline that results from checking in this resource.

   A server MAY reject attempts to modify the DAV:subbaseline-set of a
   checked-out configuration.

   <!ELEMENT subbaseline-set (href*)>

12.3 Baseline Properties

   The DAV:resourcetype of a baseline MUST be DAV:baseline.  Since a
   baseline is a version resource, it has all the properties of a
   version resource.  In addition, the baseline feature introduces the
   following REQUIRED properties for a baseline.

12.3.1 DAV:baseline-collection (protected)

   This property contains a server-defined URL for a collection, where
   each member of this collection MUST either be a version-controlled
   resource with the same DAV:checked-in version and relative name as a
   version-controlled member of the baseline-controlled collection at
   the time the baseline was created, or be a collection needed to
   provide the relative name for a version-controlled resource.

   <!ELEMENT baseline-collection (href)>

12.3.2 DAV:subbaseline-set (protected)

   The URLs in the DAV:subbaseline-set property MUST identify a set of
   other baselines.  The subbaselines of a baseline are the baselines
   identified by its DAV:subbaseline-set and all subbaselines of the
   baselines identified by its DAV:subbaseline-set.

   <!ELEMENT subbaseline-set (href*)>

12.4 Additional Resource Properties

   The baseline feature introduces the following REQUIRED property for a
   resource.

12.4.1 DAV:version-controlled-configuration (computed)

   If the resource is a member of a version-controlled configuration
   (i.e. the resource is a collection under baseline control or is a
   member of a collection under baseline control), this property
   identifies that version-controlled configuration.



Clemm, et al.               Standards Track                    [Page 79]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   <!ELEMENT version-controlled-configuration (href)>

12.5 Additional Workspace Properties

   The baseline feature introduces the following REQUIRED property for a
   workspace.

12.5.1 DAV:baseline-controlled-collection-set (computed)

   This property identifies each member of the workspace that is a
   collection under baseline control (as well as the workspace itself,
   if it is under baseline control).

   <!ELEMENT baseline-controlled-collection-set (href*)>

12.6 BASELINE-CONTROL Method

   A collection can be placed under baseline control with a
   BASELINE-CONTROL request.  When a collection is placed under baseline
   control, the DAV:version-controlled-configuration property of the
   collection is set to identify a new version-controlled configuration.
   This version-controlled configuration can be checked out and then
   checked in to create a new baseline for that collection.

   If a baseline is specified in the request body, the DAV:checked-in
   version of the new version-controlled configuration will be that
   baseline, and the collection is initialized to contain version-
   controlled members whose DAV:checked-in versions and relative names
   are determined by the specified baseline.

   If no baseline is specified, a new baseline history is created
   containing a baseline that captures the state of the version-
   controlled members of the collection, and the DAV:checked-in version
   of the version-controlled configuration will be that baseline.

   Marshalling:

      If a request body is included, it MUST be a DAV:baseline-control
      XML element.

      <!ELEMENT baseline-control ANY>
      ANY value: A sequence of elements with at most one DAV:baseline
      element.

      <!ELEMENT baseline (href)>

      If a response body for a successful request is included, it MUST
      be a DAV:baseline-control-response XML element.



Clemm, et al.               Standards Track                    [Page 80]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      <!ELEMENT baseline-control-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:version-controlled-configuration-must-not-exist): The
      DAV:version-controlled-configuration property of the collection
      identified by the request-URL MUST not exist.

      (DAV:must-be-baseline): The DAV:href of the DAV:baseline element
      in the request body MUST identify a baseline.

      (DAV:must-have-no-version-controlled-members): If a DAV:baseline
      element is specified in the request body, the collection
      identified by the request-URL MUST have no version-controlled
      members.

      (DAV:one-baseline-controlled-collection-per-history-per-
      workspace):  If the request-URL identifies a workspace or a member
      of a workspace, and if a baseline is specified in a DAV:baseline
      element in the request body, then there MUST NOT be another
      collection in that workspace whose DAV:version-controlled-
      configuration property identifies a version-controlled
      configuration for the baseline history of that baseline.

   Postconditions:

      (DAV:create-version-controlled-configuration): A new version-
      controlled configuration is created, whose DAV:baseline-
      controlled-collection property identifies the collection.

      (DAV:reference-version-controlled-configuration): The
      DAV:version-controlled-configuration of the collection identifies
      the new version-controlled configuration.

      (DAV:select-existing-baseline): If the request body specifies a
      baseline, the DAV:checked-in property of the new version-
      controlled configuration MUST have been set to identify this
      baseline.  A version-controlled member of the collection will be
      created for each version in the baseline, where the version-
      controlled member will have the content and dead properties of
      that version, and will have the same name relative to the
      collection as the corresponding version-controlled resource had
      when the baseline was created.  Any nested collections that are
      needed to provide the appropriate name for a version-controlled
      member will be created.




Clemm, et al.               Standards Track                    [Page 81]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:create-new-baseline): If no baseline is specified in the
      request body, the request MUST have created a new baseline history
      at a server-defined URL, and MUST have created a new baseline in
      that baseline history.  The DAV:baseline-collection of the new
      baseline MUST identify a collection whose members have the same
      relative name and DAV:checked-in version as the version-controlled
      members of the request collection.  The DAV:checked-in property of
      the new version-controlled configuration MUST identify the new
      baseline.

12.6.1 Example - BASELINE-CONTROL

   >>REQUEST

     BASELINE-CONTROL /src HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:baseline-control xmlns:D="DAV:">
       <D:href>http://www.webdav.org/repo/blh/13/ver/8</D:href>
     </D:baseline-control>

   >>RESPONSE

     HTTP/1.1 200 OK
     Cache-Control: no-cache
     Content-Length: 0






















Clemm, et al.               Standards Track                    [Page 82]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In this example, the collection /src is placed under baseline
   control, and is populated with members from an existing baseline.  A
   new version-controlled configuration (/repo/vcc/128) is created and
   associated with /src, and /src is initialized with version-controlled
   members whose DAV:checked-in versions are those selected by the
   DAV:baseline-collection (/repo/bc/15) of the specified baseline
   (/repo/blh/13/ver/8).  The following diagram illustrates the
   resulting state on the server.

         +-------------------------------------+
         |Baseline-Controlled Collection       |<------+
         |/src                                 |       |
         |-------------------------------------|       |
         |DAV:version-controlled-configuration +---+   |
         +-------------------------------------+   |   |
                                                   |   |
                                                   |   |
         +-------------------------------------+   |   |
         |Version-Controlled Configuration     |<--+   |
         |/repo/vcc/128                        |       |
         |-------------------------------------|       |
         |DAV:baseline-controlled-collection   +-------+
         |-------------------------------------|
         |DAV:checked-in                       +-------+
         +-------------------------------------+       |
         |DAV:version-history                  +---+   |
         +-------------------------------------+   |   |
                                                   |   |
                                                   |   |
         +------------------------+                |   |
         |Baseline History        |<---------------+   |
         |/repo/blh/13            |                    |
         |------------------------+                    |
         |DAV:version-set         +----------------+   |
         +------------------------+    |   |   |   |   |
                                       v   |   v   v   |
                                           |           |
         +------------------------+        |           |
         |Baseline                |<-------+-----------+
         |/repo/blh/13/ver/8      |
         |------------------------+     +--------------+
         |DAV:baseline-collection +---->|Collection    |
         +------------------------+     |/repo/bc/15   |
                                        +--------------+







Clemm, et al.               Standards Track                    [Page 83]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   In order to create new baselines of /src, /repo/vcc/128 can be
   checked out, new versions can be created or selected by the version-
   controlled members of /src, and then /repo/vcc/128 can be checked in
   to capture the current state of those version-controlled members.

12.7 DAV:compare-baseline Report

   A DAV:compare-baseline report contains the differences between the
   baseline identified by the request-URL (the "request baseline") and
   the baseline specified in the request body (the "compare baseline").

   Marshalling:

      The request body MUST be a DAV:compare-baseline XML element.

      <!ELEMENT compare-baseline (href)>

      The response body for a successful request MUST be a DAV:compare-
      baseline-report XML element.

      <!ELEMENT compare-baseline-report
       (added-version | deleted-version | changed-version)*>

      A DAV:added-version element identifies a version that is the
      DAV:checked-in version of a member of the DAV:baseline-collection
      of the compare baseline, but no version in the version history of
      that version is the DAV:checked-in version of a member of the
      DAV:baseline-collection of the request baseline.

      <!ELEMENT added-version (href)>

      A DAV:deleted-version element identifies a version that is the
      DAV:checked-in version of a member of the DAV:baseline-collection
      of the request baseline, but no version in the version history of
      that version is the DAV:checked-in version of a member of the
      DAV:baseline-collection of the compare baseline.

      <!ELEMENT deleted-version (href)>

      A DAV:changed-version element identifies two different versions
      from the same version history that are the DAV:checked-in version
      of the DAV:baseline-collection of the request baseline and the
      compare baseline, respectively.

      <!ELEMENT changed-version (href, href)>






Clemm, et al.               Standards Track                    [Page 84]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Preconditions:

      (DAV:must-be-baseline): The DAV:href in the request body MUST
      identify a baseline.

      (DAV:baselines-from-same-history): A server MAY require that the
      baselines being compared be from the same baseline history.

12.7.1 Example - DAV:compare-baseline Report

   >>REQUEST

     REPORT /bl-his/12/bl/14 HTTP/1.1
     Host: repo.webdav.com
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:compare-baseline xmlns:D="DAV:">
       <D:href>http://repo.webdav.org/bl-his/12/bl/15</D:href>
     </D:compare-baseline>

   >>RESPONSE

     HTTP/1.1 200 OK
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:compare-baseline-report xmlns:D="DAV:">
       <D:added-version>
         <D:href>http://repo.webdav.org/his/23/ver/8</D:href>
       </D:added-version>
       <D:changed-version>
         <D:href>http://repo.webdav.org/his/29/ver/12</D:href>
         <D:href>http://repo.webdav.org/his/29/ver/19</D:href>
       </D:changed-version>
       <D:deleted-version>
         <D:href>http://repo.webdav.org/his/12/ver/4</D:href>
       </D:deleted-version>
     </D:compare-baseline-report>

   In this example, the differences between baseline 14 and baseline 15
   of http://repo.webdav.org/bl-his/12 are identified.







Clemm, et al.               Standards Track                    [Page 85]



RFC 3253            Versioning Extensions to WebDAV           March 2002


12.8 Additional OPTIONS Semantics

   If a server supports the baseline feature, it MUST include "baseline"
   as a field in the DAV response header from an OPTIONS request on any
   resource that supports any versioning properties, reports, or
   methods.

12.9 Additional MKCOL Semantics

   Additional Postconditions:

      If a server automatically puts a newly created collection under
      baseline control, all postconditions for BASELINE-CONTROL apply to
      the MKCOL.

12.10 Additional COPY Semantics

   Additional Postconditions:

      If the request creates a new collection at the Destination, and a
      server automatically puts a newly created collection under
      baseline control, all postconditions for BASELINE-CONTROL apply to
      the COPY.

12.11 Additional CHECKOUT Semantics

   Additional Preconditions:

      (DAV:must-not-update-baseline-collection): If the request-URL
      identifies a member of the configuration rooted at the
      DAV:baseline-collection of a baseline, the request MUST fail.

12.12 Additional CHECKIN Semantics

   Additional Preconditions:

      (DAV:no-checked-out-baseline-controlled-collection-members): If
      the request-URL identifies a version-controlled configuration, all
      version-controlled members of the DAV:baseline-controlled-
      collection of the version-controlled configuration MUST be
      checked-in.

      (DAV:one-version-per-history-per-baseline): If the request-URL
      identifies a version-controlled configuration, the set of versions
      selected by that version-controlled configuration MUST contain at
      most one version from any version history, where a version is
      selected by a version-controlled configuration if the version is
      identified by the DAV:checked-in property of any member of the



Clemm, et al.               Standards Track                    [Page 86]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      configuration rooted at the DAV:baseline-controlled collection of
      that version-controlled configuration, or is identified by the
      DAV:checked-in property of any member of the configuration rooted
      at the DAV:baseline-collection of any subbaseline of that
      version-controlled configuration.

      (DAV:cannot-modify-version-controlled-configuration): If the
      request-URL identifies a version-controlled member of a baseline-
      controlled collection whose version-controlled configuration is
      checked-in, the request MUST fail unless the DAV:auto-version
      property of the version-controlled configuration will
      automatically check out that version-controlled configuration when
      it is modified.

   Additional Postconditions:

      (DAV:create-baseline-collection): If the request-URL identifies a
      version-controlled configuration, the DAV:baseline-collection of
      the new baseline identifies a collection whose members have the
      same relative name and DAV:checked-in version as the members of
      the DAV:baseline-controlled-collection of the version-controlled
      configuration at the time of the request.

      (DAV:modify-configuration): If the request-URL identifies a
      version-controlled member of a baseline-controlled collection,
      this is a modification to the version-controlled configuration of
      that baseline-controlled collection, and standard auto-versioning
      semantics apply.

12.13 Additional UPDATE Semantics

   Additional Preconditions:

      (DAV:baseline-controlled-members-must-be-checked-in): If the
      request-URL identifies a version-controlled configuration, then
      all version-controlled members of the DAV:baseline-controlled-
      collection of that version-controlled configuration MUST be
      checked-in.

      (DAV:must-not-update-baseline-collection): If the request-URL
      identifies a member of the configuration rooted at the
      DAV:baseline-collection of a baseline, the request MUST fail.

      (DAV:cannot-modify-version-controlled-configuration): If the
      request updates the DAV:checked-in property of any version-
      controlled member of a baseline-controlled collection whose
      version-controlled configuration is checked-in, the request MUST




Clemm, et al.               Standards Track                    [Page 87]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      fail unless the DAV:auto-version property of the version-
      controlled configuration will automatically check out that
      version-controlled configuration when it is modified.

   Additional Postconditions:

      (DAV:set-baseline-controlled-collection-members): If the request
      updated the DAV:checked-in property of a version-controlled
      configuration, then the version-controlled members of the
      DAV:baseline-controlled-collection of that version-controlled
      configuration MUST have been updated so that they have the same
      relative name, content, and dead properties as the members of the
      DAV:baseline-collection of the baseline.  In particular:

      -  A version-controlled member for a given version history MUST
         have been deleted if there is no version-controlled member for
         that version history in the DAV:baseline-collection of the
         baseline.
      -  A version-controlled member for a given version history MUST
         have been renamed if its name relative to the baseline-
         controlled collection is different from that of the version-
         controlled member for that version history in the
         DAV:baseline-collection of the baseline.
      -  A new version-controlled member MUST have been created for each
         member of the DAV:baseline-collection of the baseline for which
         there is no corresponding version-controlled member in the
         baseline-controlled collection.
      -  An UPDATE request MUST have been applied to each version-
         controlled member for a given version history whose
         DAV:checked-in version is not the same as that of the version-
         controlled member for that version history in the
         DAV:baseline-collection of the baseline.

      (DAV:update-subbaselines): If the request updated a version-
      controlled configuration whose DAV:baseline-controlled-collection
      contains a baseline-controlled member for one of the subbaselines
      of the request baseline, then the DAV:checked-in property of the
      version-controlled configuration of that baseline-controlled
      member MUST have been updated to be that subbaseline.  If the
      request updated a version-controlled configuration whose
      DAV:baseline-controlled-collection is a member of a workspace that
      contains a baseline-controlled member for one of the subbaselines
      of the request baseline, then the DAV:checked-in property of the
      version-controlled configuration of that baseline-controlled
      member MUST have been updated to be that subbaseline.






Clemm, et al.               Standards Track                    [Page 88]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:modify-configuration): If the request updated the
      DAV:checked-in property of any version-controlled member of a
      baseline-controlled collection, and if this DAV:checked-in
      property differs from the DAV:checked-in property of the
      corresponding version-controlled member of the DAV:baseline-
      collection of the DAV:checked-in baseline of the DAV:version-
      controlled-configuration of the baseline-controlled collection,
      then this is a modification to that version-controlled
      configuration, and standard auto-versioning semantics apply.

12.14 Additional MERGE Semantics

   If the merge source is a baseline, the merge target is a version-
   controlled configuration for the baseline history of that baseline,
   where the baseline-controlled collection of that version-controlled
   configuration is a member of the collection identified by the
   request-URL.

   Additional Preconditions:

      (DAV:must-not-update-baseline-collection): Same semantics as
      UPDATE (see Section 12.13).

      (DAV:cannot-modify-version-controlled-configuration): Same
      semantics as UPDATE (see Section 12.13).

   Additional Postconditions:

      (DAV:merge-baseline): If the merge target is a version-controlled
      configuration whose DAV:checked-out baseline is not a descendant
      of the merge baseline, then the merge baseline MUST have been
      added to the DAV:auto-merge-set of a version-controlled
      configuration.  The DAV:checked-in version of each member of the
      DAV:baseline-collection of that baseline MUST have been merged
      into the DAV:baseline-controlled-collection of that version-
      controlled configuration.

      (DAV:merge-subbaselines): If the merge target is a version-
      controlled configuration whose DAV:baseline-controlled-collection
      contains a baseline-controlled member for one of the subbaselines
      of the merge baseline, then that subbaseline MUST have been merged
      into the version-controlled configuration of that baseline-
      controlled member.  If the merge target is a version-controlled
      configuration whose DAV:baseline-controlled-collection is a member
      of a workspace that contains a baseline-controlled member for one
      of the subbaselines of the merge baseline, then that subbaseline
      MUST have been merged into the version-controlled configuration of
      that baseline-controlled member.



Clemm, et al.               Standards Track                    [Page 89]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      (DAV:set-baseline-controlled-collection-members): Same semantics
      as UPDATE (see Section 12.13).

      (DAV:modify-configuration): Same semantics as UPDATE (see Section
      12.13).

13 Activity Feature

   An activity is a resource that selects a set of versions that are on
   a single "line of descent", where a line of descent is a sequence of
   versions connected by successor relationships.  If an activity
   selects versions from multiple version histories, the versions
   selected in each version history must be on a single line of descent.

   A common problem that motivates the use of activities is that it is
   often desirable to perform several different logical changes in a
   single workspace, and then selectively merge a subset of those
   logical changes to other workspaces.  An activity can be used to
   represent a single logical change, where an activity tracks all the
   resources that were modified to effect that single logical change.
   When a version-controlled resource is checked out, the user specifies
   which activity should be associated with a new version that will be
   created when that version-controlled resource is checked in.  It is
   then possible to select a particular logical change for merging into
   another workspace, by specifying the appropriate activity in a MERGE
   request.

   Another common problem is that although a version-controlled resource
   may need to have multiple lines of descent, all work done by members
   of a given team must be on a single line of descent (to avoid merging
   between team members).  An activity resource provides the mechanism
   for addressing this problem.  When a version-controlled resource is
   checked out, a client can request that an existing activity be used
   or that a new activity be created.  Activity semantics then ensure
   that all versions in a given version history that are associated with
   an activity are on a single line of descent.  If all members of a
   team share a common activity (or sub-activities of a common
   activity), then all changes made by members of that team will be on a
   single line of descent.












Clemm, et al.               Standards Track                    [Page 90]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   The following diagram illustrates activities.  Version V5 is the
   latest version of foo.html selected by activity Act-2, and version V8
   is the latest version of bar.html selected by activity Act-2.

                  foo.html History       bar.html History

                        +---+                  +---+
                   Act-1|   |V1           Act-1|   |V6
                        +---+                  +---+
                          |                      |
                          |                      |
                        +---+                  +---+
                   Act-1|   |V2           Act-2|   |V7
                        +---+                  +---+
                       /     \                   |
                      /       \                  |
                 +---+         +---+           +---+
            Act-1|   |V3  Act-2|   |V4    Act-2|   |V8
                 +---+         +---+           +---+
                                 |               |
                                 |               |
                               +---+           +---+
                          Act-2|   |V5    Act-3|   |V9
                               +---+           +---+

   Activities appear under a variety of names in existing versioning
   systems.  When an activity is used to capture a logical change, it is
   commonly called a "change set".  When an activity is used to capture
   a line of descent, it is commonly called a "branch".  When a system
   supports both branches and change sets, it is often useful to require
   that a particular change set occur on a particular branch.  This
   relationship can be captured by making the change set activity be a
   "subactivity" of the branch activity.

13.1 Activity Properties

   The DAV:resourcetype of an activity MUST be DAV:activity.

   The activity feature introduces the following REQUIRED properties for
   an activity.

13.1.1 DAV:activity-version-set (computed)

   This property identifies each version whose DAV:activity-set property
   identifies this activity.  Multiple versions of a single version
   history can be selected by an activity's DAV:activity-version-set





Clemm, et al.               Standards Track                    [Page 91]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   property, but all DAV:activity-version-set versions from a given
   version history must be on a single line of descent from the root
   version of that version history.

   <!ELEMENT activity-version-set (href*)>

13.1.2 DAV:activity-checkout-set (computed)

   This property identifies each checked-out resource whose
   DAV:activity-set identifies this activity.

   <!ELEMENT activity-checkout-set (href*)>

13.1.3 DAV:subactivity-set

   This property identifies each activity that forms a part of the
   logical change being captured by this activity.  An activity behaves
   as if its DAV:activity-version-set is extended by the DAV:activity-
   version-set of each activity identified in the DAV:subactivity-set.
   In particular, the versions in this extended set MUST be on a single
   line of descent, and when an activity selects a version for merging,
   the latest version in this extended set is the one that will be
   merged.

   A server MAY reject attempts to modify the DAV:subactivity-set of an
   activity.

   <!ELEMENT subactivity-set (href*)>

13.1.4 DAV:current-workspace-set (computed)

   This property identifies each workspace whose DAV:current-activity-
   set identifies this activity.

   <!ELEMENT current-workspace-set (href*)>

13.2 Additional Version Properties

   The activity feature introduces the following REQUIRED property for a
   version.











Clemm, et al.               Standards Track                    [Page 92]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.2.1 DAV:activity-set

   This property identifies the activities that determine to which
   logical changes this version contributes, and on which lines of
   descent this version appears.  A server MAY restrict the
   DAV:activity-set to identify a single activity.  A server MAY refuse
   to allow the value of the DAV:activity-set property of a version to
   be modified.

   <!ELEMENT activity-set (href*)>

13.3 Additional Checked-Out Resource Properties

   The activity feature introduces the following REQUIRED properties for
   a checked-out resource.

13.3.1 DAV:unreserved

   This property of a checked-out resource indicates whether the
   DAV:activity-set of another checked-out resource associated with the
   version history of this version-controlled resource can have an
   activity that is in the DAV:activity-set property of this checked-out
   resource.

   A result of the requirement that an activity must form a single line
   of descent through a given version history is that if multiple
   checked-out resources for a given version history are checked out
   unreserved into a single activity, only the first CHECKIN will
   succeed.  Before another of these checked-out resources can be
   checked in, the user will first have to merge into that checked-out
   resource the latest version selected by that activity from that
   version history, and then modify the DAV:predecessor-set of that
   checked-out resource to identify that version.

   <!ELEMENT unreserved (#PCDATA)>
   PCDATA value: boolean

13.3.2 DAV:activity-set

   This property of a checked-out resource determines the DAV:activity-
   set property of the version that results from checking in this
   resource.

13.4 Additional Workspace Properties

   The activity feature introduces the following REQUIRED property for a
   workspace.




Clemm, et al.               Standards Track                    [Page 93]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.4.1 DAV:current-activity-set

   This property identifies the activities that currently are being
   performed in this workspace.  When a member of this workspace is
   checked out, if no activity is specified in the checkout request, the
   DAV:current-activity-set will be used.  This allows an activity-
   unaware client to update a workspace in which activity tracking is
   required.  The DAV:current-activity-set MAY be restricted to identify
   at most one activity.

   <!ELEMENT current-activity-set (href*)>

13.5 MKACTIVITY Method

   A MKACTIVITY request creates a new activity resource.  A server MAY
   restrict activity creation to particular collections, but a client
   can determine the location of these collections from a DAV:activity-
   collection-set OPTIONS request.

   Marshalling:

      If a request body is included, it MUST be a DAV:mkactivity XML
      element.

      <!ELEMENT mkactivity ANY>

      If a response body for a successful request is included, it MUST
      be a DAV:mkactivity-response XML element.

      <!ELEMENT mkactivity-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:resource-must-be-null): A resource MUST NOT exist at the
      request-URL.

      (DAV:activity-location-ok): The request-URL MUST identify a
      location where an activity can be created.

   Postconditions:

      (DAV:initialize-activity): A new activity exists at the request-
      URL.  The DAV:resourcetype of the activity MUST be DAV:activity.






Clemm, et al.               Standards Track                    [Page 94]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.5.1 Example - MKACTIVITY

   >>REQUEST

     MKACTIVITY /act/test-23 HTTP/1.1
     Host: repo.webdav.org
     Content-Length: 0

   >>RESPONSE

     HTTP/1.1 201 Created
     Cache-Control: no-cache

   In this example, a new activity is created at
   http://repo.webdav.org/act/test-23.

13.6 DAV:latest-activity-version Report

   The DAV:latest-activity-version report can be applied to a version
   history to identify the latest version that is selected from that
   version history by a given activity.

   Marshalling:

      The request body MUST be a DAV:latest-activity-version XML
      element.

      <!ELEMENT latest-activity-version (href)>

      The response body for a successful request MUST be a DAV:latest-
      activity-version-report XML element.

      <!ELEMENT latest-activity-version-report (href)>

      The DAV:href of the response body MUST identify the version of the
      given version history that is a member of the DAV:activity-
      version-set of the given activity and has no descendant that is a
      member of the DAV:activity-version-set of that activity.

   Preconditions:

      (DAV:must-be-activity): The DAV:href in the request body MUST
      identify an activity.








Clemm, et al.               Standards Track                    [Page 95]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.7 Additional OPTIONS Semantics

   If the server supports the activity feature, it MUST include
   "activity" as a field in the DAV response header from an OPTIONS
   request on any resource that supports any versioning properties,
   reports, or methods.

   A DAV:activity-collection-set element MAY be included in the request
   body to identify collections that may contain activity resources.

   Additional Marshalling:

      If an XML request body is included, it MUST be a DAV:options XML
      element.

      <!ELEMENT options ANY>
      ANY value: A sequence of elements with at most one
      DAV:activity-collection-set element.

      If an XML response body for a successful request is included, it
      MUST be a DAV:options-response XML element.

      <!ELEMENT options-response ANY>
      ANY value: A sequence of elements with at most one
      DAV:activity-collection-set element.

      <!ELEMENT activity-collection-set (href*)>

      If DAV:activity-collection-set is included in the request body,
      the response body for a successful request MUST contain a
      DAV:activity-collection-set element identifying collections that
      may contain activities.  An identified collection MAY be the root
      collection of a tree of collections, all of which may contain
      activities.  Since different servers can control different parts
      of the URL namespace, different resources on the same host MAY
      have different DAV:activity-collection-set values.  The identified
      collections MAY be located on different hosts from the resource.

13.8 Additional DELETE Semantics

   Additional Postconditions:

      (DAV:delete-activity-reference): If an activity is deleted, any
      reference to that activity in a DAV:activity-set,
      DAV:subactivity-set, or DAV:current-activity-set MUST be removed.






Clemm, et al.               Standards Track                    [Page 96]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.9 Additional MOVE Semantics

   Additional Postconditions:

      (DAV:update-checked-out-reference): If a checked-out resource is
      moved, any reference to that resource in a DAV:activity-checkout-
      set property MUST be updated to refer to the new location of that
      resource.

      (DAV:update-activity-reference): If the request-URL identifies an
      activity, any reference to that activity in a DAV:activity-set,
      DAV:subactivity-set, or DAV:current-activity-set MUST be updated
      to refer to the new location of that activity.

      (DAV:update-workspace-reference): If the request-URL identifies a
      workspace, any reference to that workspace in a DAV:current-
      workspace-set property MUST be updated to refer to the new
      location of that workspace.

13.10 Additional CHECKOUT Semantics

   A CHECKOUT request MAY specify the DAV:activity-set for the checked-
   out resource.

   Additional Marshalling:

      <!ELEMENT checkout ANY> ANY value: A sequence of elements with at
      most one DAV:activity-set and at most one DAV:unreserved.

      <!ELEMENT activity-set (href+ | new)>
      <!ELEMENT new EMPTY>
      <!ELEMENT unreserved EMPTY>

   Additional Preconditions:

      (DAV:one-checkout-per-activity-per-history): If there is a request
      activity set, unless DAV:unreserved is specified, another checkout
      from a version of that version history MUST NOT select an activity
      in that activity set.

      (DAV:linear-activity): If there is a request activity set, unless
      DAV:unreserved is specified, the selected version MUST be a
      descendant of all other versions of that version history that
      select that activity.







Clemm, et al.               Standards Track                    [Page 97]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Postconditions:

      (DAV:initialize-activity-set): The DAV:activity-set of the
      checked-out resource is set as follows:

      -  If DAV:new is specified as the DAV:activity-set in the request
         body, then a new activity created by the server is used.
      -  Otherwise, if activities are specified in the request body,
         then those activities are used.
      -  Otherwise, if the version-controlled resource is a member of a
         workspace and the DAV:current-activity-set of the workspace is
         set, then those activities are used.
      -  Otherwise, the DAV:activity-set of the DAV:checked-out version
         is used.

      (DAV:initialize-unreserved): If DAV:unreserved was specified in
      the request body, then the DAV:unreserved property of the
      checked-out resource MUST be "true".

13.10.1 Example - CHECKOUT with an activity

   >>REQUEST

     CHECKOUT /ws/public/foo.html HTTP/1.1
     Host: www.webdav.org
     Content-Type: text/xml; charset="utf-8"
     Content-Length: xxxx

     <?xml version="1.0" encoding="utf-8" ?>
     <D:checkout xmlns:D="DAV:">
       <D:activity-set>
         <D:href>http://repo.webdav.org/act/fix-bug-23</D:href>
       </D:activity-set>
     </D:checkout>

   >>RESPONSE

     HTTP/1.1 200 OK
     Cache-Control: no-cache

   In this example, the CHECKOUT is being performed in the
   http://repo.webdav.org/act/fix-bug-23 activity.









Clemm, et al.               Standards Track                    [Page 98]



RFC 3253            Versioning Extensions to WebDAV           March 2002


13.11 Additional CHECKIN Semantics

   Additional Preconditions:

      (DAV:linear-activity): Any version which is in the version history
      of the checked-out resource and whose DAV:activity-set identifies
      an activity from the DAV:activity-set of the checked-out resource
      MUST be an ancestor of the checked-out resource.

      (DAV:atomic-activity-checkin): If the request-URL identifies an
      activity, the server MAY fail the request if any of the checked-
      out resources in the DAV:activity-checkout-set of either that
      activity or any subactivity of that activity cannot be checked in.

   Additional Postconditions:

      (DAV:initialize-activity-set): The DAV:activity-set of the new
      version MUST have been initialized to be the same as the
      DAV:activity-set of the checked-out resource.

      (DAV:activity-checkin): If the request-URL identified an activity,
      the server MUST have successfully applied the CHECKIN request to
      each checked-out resource in the DAV:activity-checkout-set of both
      that activity and any subactivity of that activity.

13.12 Additional MERGE Semantics

   If the DAV:source element of the request body identifies an activity,
   then for each version history containing a version selected by that
   activity, the latest version selected by that activity is a merge
   source.  Note that the versions selected by an activity are the
   versions in its DAV:activity-version-set unioned with the versions
   selected by the activities in its DAV:subactivity-set.

   Additional Marshalling:

      <!ELEMENT checkin-activity EMPTY>

   Additional Postconditions:

      (DAV:checkin-activity): If DAV:checkin-activity is specified in
      the request body, and if the DAV:source element in the request
      body identifies an activity, a CHECKIN request MUST have been
      successfully applied to that activity before the merge sources
      were determined.






Clemm, et al.               Standards Track                    [Page 99]



RFC 3253            Versioning Extensions to WebDAV           March 2002


14 Version-Controlled-Collection Feature

   As with any versionable resource, when a collection is put under
   version control, a version history resource is created to contain
   versions for that version-controlled collection.  In order to
   preserve standard versioning semantics (a version of a collection
   should not be modifiable), a collection version only records
   information about the version-controlled bindings of that collection.

   In order to cleanly separate a modification to the namespace from a
   modification to content or dead properties, a version of a collection
   has no members, but instead records in its DAV:version-controlled-
   binding-set property the binding name and version history resource of
   each version-controlled internal member of that collection.  If,
   instead, a collection version contained bindings to other versions,
   creating a new version of a resource would require creating a new
   version of all the collection versions that contain that resource,
   which would cause activities to become entangled.  For example,
   suppose a "feature-12" activity created a new version of /x/y/a.html.
   If a collection version contained bindings to versions of its
   members, a new version of /x/y would have to be created to contain
   the new version of /x/y/a.html, and a new version of /x would have to
   be created to contain the new version of /x/y.  Now suppose a
   "bugfix-47" activity created a new version of /x/z/b.html.  Again, a
   new version of /x/z and a new version of /x would have to be created
   to contain the new version of /x/y/b.html.  But now it is impossible
   to merge just "bugfix-47" into another workspace without "feature-
   12", because the version of /x that contains the desired version of
   /x/z/b.html also contains version of /x/y/a.html created for
   "feature-12".  If, instead, a collection version just records the
   binding name and version history resource of each version-controlled
   internal member, changing the version selected by a member of that
   collection would not require a new version of the collection.  The
   new version is still in the same version history so no new collection
   version is required, and "feature-12" and "bugfix-47" would not
   become entangled.

   In the following example, there are three version histories, named
   VH14, VH19, and VH24, where VH14 contains versions of a collection.
   The version-controlled collection /x has version V2 of version
   history VH14 as its DAV:checked-in version.  Since V2 has recorded
   two version controlled bindings, one with binding name "a" to version
   history VH19, and the other with binding name "b" to version history
   VH24, /x MUST have two version-controlled bindings, one named "a" to
   a version-controlled resource for history VH19, and the other named
   "b" to a version-controlled resource for history VH24.  The version-





Clemm, et al.               Standards Track                   [Page 100]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   controlled resource /x/a currently has V4 of VH19 as its
   DAV:checked-in version, while /x/b has V8 of VH24 as its
   DAV:checked-in version.

                                                          VH19
                                                       +---------+
                                                       | +---+   |
                                                       | |   |V4 |
                                                       | +---+   |
                                                       |   |     |
                                                       |   |     |
                                                       | +---+   |
                                                       | |   |V5 |
                                            VH14       | +---+   |
                                        +---------+    |   |     |
                                        | +---+   |    |   |     |
               a  +---+                 | |   |V1 |    | +---+   |
             ---->|   |checked-in=V4    | +---+   | a  | |   |V6 |
            /     +---+                 |   |   ------>| +---+   |
           /                            |   |  /  |    +---------+
      +---+                             | +---+   |
   /x |   |checked-in=V2                | |   |V2 |
      +---+                             | +---+   |       VH24
           \                            |   |  \  | b  +---------+
            \  b  +---+                 |   |   ------>| +---+   |
             ---->|   |checked-in=V8    | +---+   |    | |   |V7 |
                  +---+                 | |   |V3 |    | +---+   |
                                        | +---+   |    |   |     |
                                        +---------+    |   |     |
                                                       | +---+   |
                                                       | |   |V8 |
                                                       | +---+   |
                                                       |   |     |
                                                       |   |     |
                                                       | +---+   |
                                                       | |   |V9 |
                                                       | +---+   |
                                                       +---------+

   For any request (e.g., DELETE, MOVE, COPY) that modifies a version-
   controlled binding of a checked-in version-controlled collection, the
   request MUST fail unless the version-controlled collection has a
   DAV:auto-version property that will automatically check out the
   version-controlled collection when it is modified.

   Although a collection version only records the version-controlled
   bindings of a collection, a version-controlled collection MAY contain
   both version-controlled and non-version-controlled bindings.  Non-



Clemm, et al.               Standards Track                   [Page 101]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   version-controlled bindings are not under version control, and
   therefore can be added or deleted without checking out the version-
   controlled collection.

   Note that a collection version captures only a defined subset of the
   state of a collection.  In particular, a version of a collection
   captures its dead properties and its bindings to version-controlled
   resources, but not its live properties or bindings to non-version-
   controlled resources.

   When a server supports the working-resource feature, a client can
   check out a collection version to create a working collection.
   Unlike a version-controlled collection, which contains bindings to
   version-controlled resources and non-version-controlled resources, a
   working collection contains bindings to version history resources and
   non-version-controlled resources.  In particular, a working
   collection is initialized to contain bindings to the version history
   resources specified by the DAV:version-controlled-binding-set of the
   checked out collection version.  The members of a working collection
   can then be deleted or moved to another working collection.  Non-
   version-controlled resources can be added to a working collection
   with methods such as PUT, COPY, and MKCOL.  When a working collection
   is checked in, a VERSION-CONTROL request is automatically applied to
   every non-version-controlled member of the working collection, and
   each non-version-controlled member is replaced by its newly created
   version history.  The DAV:version-controlled-binding-set of the new
   version resulting from checking in a working collection contains the
   binding name and version history URL for each member of the working
   collection.

14.1 Version-Controlled Collection Properties

   A version-controlled collection has all the properties of a
   collection and of a version-controlled resource.  In addition, the
   version-controlled-collection feature introduces the following
   REQUIRED property for a version-controlled collection.

14.1.1 DAV:eclipsed-set (computed)

   This property identifies the non-version-controlled internal members
   of the collection that currently are eclipsing a version-controlled
   internal member of the collection.

   !ELEMENT eclipsed-set (binding-name*)>
   <!ELEMENT binding-name (#PCDATA)>
   PCDATA value: URL segment





Clemm, et al.               Standards Track                   [Page 102]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   An UPDATE or MERGE request can give a version-controlled collection a
   version-controlled internal member that has the same name as an
   existing non-version-controlled internal member.  In this case, the
   non-version-controlled internal member takes precedence and is said
   to "eclipse" the new versioned-controlled internal member.  If the
   non-version-controlled internal member is removed (e.g., by a DELETE
   or MOVE), the version-controlled internal member is exposed.

14.2 Collection Version Properties

   A collection version has all the properties of a version.  In
   addition, the version-controlled-collection feature introduces the
   following REQUIRED property for a collection version.

14.2.1 DAV:version-controlled-binding-set (protected)

   This property captures the name and version-history of each version-
   controlled internal member of a collection.

   <!ELEMENT version-controlled-binding-set
    (version-controlled-binding*)>
   <!ELEMENT version-controlled-binding
    (binding-name, version-history)>
   <!ELEMENT binding-name (#PCDATA)>
   PCDATA value: URL segment
   <!ELEMENT version-history (href)>

14.3 Additional OPTIONS Semantics

   If the server supports the version-controlled-collection feature, it
   MUST include "version-controlled-collection" as a field in the DAV
   response header from an OPTIONS request on any resource that supports
   any versioning properties, reports, or methods.

14.4 Additional DELETE Semantics

   Additional Preconditions:

      (DAV:cannot-modify-checked-in-parent): If the request-URL
      identifies a version-controlled resource, the DELETE MUST fail
      when the collection containing the version-controlled resource is
      a checked-in version-controlled collection, unless DAV:auto-
      version semantics will automatically check out the version-
      controlled collection.







Clemm, et al.               Standards Track                   [Page 103]



RFC 3253            Versioning Extensions to WebDAV           March 2002


14.5 Additional MKCOL Semantics

   Additional Preconditions:

      If the request creates a new resource that is automatically placed
      under version control, all preconditions for VERSION-CONTROL apply
      to the request.

   Additional Postconditions:

      If the new collection is automatically put under version control,
      all postconditions for VERSION-CONTROL apply to the request.

14.6 Additional COPY Semantics

   Additional Preconditions:

      (DAV:cannot-copy-collection-version): If the source of the request
      is a collection version, the request MUST fail.

14.7 Additional MOVE Semantics

   Additional Preconditions:

      (DAV:cannot-modify-checked-in-parent): If the source of the
      request is a version-controlled resource, the request MUST fail
      when the collection containing the source is a checked-in
      version-controlled collection, unless DAV:auto-version semantics
      will automatically check out that version-controlled collection.

      (DAV:cannot-modify-destination-checked-in-parent): If the source
      of the request is a version-controlled resource, the request MUST
      fail when the collection containing the destination is a checked-
      in version-controlled collection, unless DAV:auto-version
      semantics will automatically check out that version-controlled
      collection.

14.8 Additional VERSION-CONTROL Semantics

   Additional Preconditions:

      (DAV:cannot-modify-checked-in-parent): If the parent of the
      request-URL is a checked-in version-controlled collection, the
      request MUST fail unless DAV:auto-version semantics will
      automatically check out that version-controlled collection.






Clemm, et al.               Standards Track                   [Page 104]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Additional Postconditions:

      (DAV:new-version-controlled-collection): If the request body
      identified a collection version, the collection at the request-URL
      MUST contain a version-controlled internal member for each
      DAV:version-controlled-binding specified in the DAV:version-
      controlled-binding-set of the collection version, where the name
      and DAV:version-history of the internal member MUST be the
      DAV:binding-name and the DAV:version-history specified by the
      DAV:version-controlled-binding.  If the internal member is a
      member of a workspace, and there is another member of the
      workspace for the same version history, those two members MUST
      identify the same version-controlled resource; otherwise, a
      VERSION-CONTROL request with a server selected version of the
      version history MUST have been applied to the URL for that
      internal member.

14.9 Additional CHECKOUT Semantics

   Additional Postconditions:

      (DAV:initialize-version-history-bindings): If the request has been
      applied to a collection version, the new working collection MUST
      be initialized to contain a binding to each of the history
      resources identified in the DAV:version-controlled-binding-set of
      that collection version.

14.10 Additional CHECKIN Semantics

   Additional Postconditions:

      (DAV:initialize-version-controlled-bindings): If the request-URL
      identified a version-controlled collection, then the DAV:version-
      controlled-binding-set of the new collection version MUST contain
      a DAV:version-controlled-binding that identifies the binding name
      and version history for each version-controlled binding of the
      version- controlled collection.

      (DAV:version-control-working-collection-members): If the request-
      URL identified a working collection, a VERSION-CONTROL request
      MUST have been automatically applied to every non-version-
      controlled member of the working collection, and each non-
      version-controlled member MUST have been replaced by its newly
      created version history.  If a working collection member was a
      non-version-controlled collection, every member of the non-
      version-controlled collection MUST have been placed under version





Clemm, et al.               Standards Track                   [Page 105]



RFC 3253            Versioning Extensions to WebDAV           March 2002


      control before the non-version-controlled collection was placed
      under version control.  The DAV:version-controlled-binding-set of
      the new collection version MUST contain a DAV:version-controlled-
      binding that identifies the binding name and the version history
      URL for each member of the working collection.

14.11 Additional UPDATE and MERGE Semantics

   Additional Postconditions:

      (DAV:update-version-controlled-collection-members): If the request
      modified the DAV:checked-in version of a version-controlled
      collection, then the version-controlled members of that version-
      controlled collection MUST have been updated.  In particular:

      -  A version-controlled internal member MUST have been deleted if
         its version history is not identified by the DAV:version-
         controlled-binding-set of the new DAV:checked-in version.
      -  A version-controlled internal member for a given version
         history MUST have been renamed if its binding name differs from
         the DAV:binding-name for that version history in the
         DAV:version-controlled-binding-set of the new DAV:checked-in
         version.
      -  A new version-controlled internal member MUST have been created
         when a version history is identified by the DAV:version-
         controlled-binding-set of the DAV:checked-in version, but there
         was no member of the version-controlled collection for that
         version history.  If a new version-controlled member is in a
         workspace that already has a version-controlled resource for
         that version history, then the new version-controlled member
         MUST be just a binding (i.e., another name for) that existing
         version-controlled resource.  Otherwise, the content and dead
         properties of the new version-controlled member MUST have been
         initialized to be those of the version specified for that
         version history by the request.  If no version is specified for
         that version history by the request, the version selected is
         server defined.

15 Internationalization Considerations

   This specification has been designed to be compliant with the IETF
   Policy on Character Sets and Languages [RFC2277].  Specifically,
   where human-readable strings exist in the protocol, either their
   charset is explicitly stated, or XML mechanisms are used to specify
   the charset used.  Additionally, these human-readable strings all
   have the ability to express the natural language of the string.





Clemm, et al.               Standards Track                   [Page 106]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Most of the human-readable strings in this protocol appear in
   properties, such as DAV:creator-displayname.  As defined by RFC 2518,
   properties have their values marshaled as XML.  XML has explicit
   provisions for character set tagging and encoding, and requires that
   XML processors read XML elements encoded, at minimum, using the UTF-8
   [RFC2279] encoding of the ISO 10646 multilingual plane.  The charset
   parameter of the Content-Type header, together with the XML
   "encoding" attribute, provide charset identification information for
   MIME and XML processors.  Proper use of the charset header with XML
   is described in RFC 3023.  XML also provides a language tagging
   capability for specifying the language of the contents of a
   particular XML element.  XML uses either IANA registered language
   tags (see RFC 3066) or ISO 639 language tags in the "xml:lang"
   attribute of an XML element to identify the language of its content
   and attributes.

   DeltaV applications, since they build upon WebDAV, are subject to the
   internationalization requirements specified in RFC 2518, Section 16.
   In brief, these requirements mandate the use of XML character set
   tagging, character set encoding, and language tagging capabilities.
   Additionally, they strongly recommend reading RFC 3023 for
   instruction on the use of MIME media types for XML transport and the
   use of the charset header.

   Within this specification, a label is a human-readable string that is
   marshaled in the Label header and as XML in request entity bodies.
   When used in the Label header, the value of the label is URL-escaped
   and encoded using UTF-8.

16 Security Considerations

   All of the security considerations of WebDAV discussed in RFC 2518,
   Section 17 also apply to WebDAV versioning.  Some aspects of the
   versioning protocol help address security risks introduced by WebDAV,
   but other aspects can increase these security risks.  These issues
   are detailed below.

16.1 Auditing and Traceability

   WebDAV increases the ease with which a remote client can modify
   resources on a web site, but this also increases the risk of
   important information being overwritten and lost, either through user
   error or user maliciousness.  The use of WebDAV versioning can help
   address this problem by guaranteeing that previous information is
   saved in the form of immutable versions, and therefore is easily
   available for retrieval or restoration.  In addition, the version
   history provides a log of when changes were made, and by whom.  When
   requests are appropriately authenticated, the history mechanism



Clemm, et al.               Standards Track                   [Page 107]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   provides a clear audit trail for changes to web resources.  This can
   often significantly improve the ability to identify the source of the
   security problem, and thereby help guard against it in the future.

16.2 Increased Need for Access Control

   WebDAV versioning provides a variety of links between related pieces
   of information.  This can increase the risk that authentication or
   authorization errors allow a client to locate sensitive information.
   For example, if version history is not appropriately protected by
   access control, a client can use the version history of a public
   resource to identify later versions of that resource that the user
   intended to keep private.  This increases the need for reliable
   authentication and accurate authorization.

   A WebDAV versioning client should be designed to handle a mixture of
   200 (OK) and 403 (Forbidden) responses on attempts to access the
   properties and reports that are supported by a resource.  For
   example, a particular user may be authorized to access the content
   and dead properties of a version-controlled resource, but not be
   authorized to access the DAV:checked-in, DAV:checked-out, or
   DAV:version-history properties of that resource.

16.3 Security Through Obscurity

   While it is acknowledged that "obscurity" is not an effective means
   of security, it is often a good technique to keep honest people
   honest.  Within this protocol, version URLs, version history URLs,
   and working resource URLs are generated by the server and can be
   properly obfuscated so as not to draw attention to them.  For
   example, a version of "http://foobar.com/reviews/salaries.html" might
   be assigned a URL such as "http://foobar.com/repo/4934943".

16.4 Denial of Service

   The auto-versioning mechanism provided by WebDAV can result in a
   large number of resources being created on the server, since each
   update to a resource could potentially result in the creation of a
   new version resource.  This increases the risk of a denial of service
   attack that exhausts the storage capability of a server.  This risk
   is especially significant because it can be an unintentional result
   of something like an aggressive auto-save feature provided by an
   editing client.  A server can decrease this risk by using delta
   storage techniques to minimize the cost of additional versions, and
   by limiting auto-versioning to a locking client, and thereby
   decreasing the number of inadvertent version creations.





Clemm, et al.               Standards Track                   [Page 108]



RFC 3253            Versioning Extensions to WebDAV           March 2002


17 IANA Considerations

   This document uses the namespace defined by RFC 2518 for XML
   elements.  All other IANA considerations from RFC 2518 are also
   applicable to WebDAV Versioning.

18 Intellectual Property

   The following notice is copied from RFC 2026, Section 10.4, and
   describes the position of the IETF concerning intellectual property
   claims made against this document.

   The IETF takes no position regarding the validity or scope of any
   intellectual property or other rights that might be claimed to
   pertain to the implementation or use other technology described in
   this document or the extent to which any license under such rights
   might or might not be available; neither does it represent that it
   has made any effort to identify any such rights.  Information on the
   procedures of the IETF with respect to rights in standards-track and
   standards-related documentation can be found in BCP-11.  Copies of
   claims of rights made available for publication and any assurances of
   licenses to be made available, or the result of an attempt made to
   obtain a general license or permission for the use of such
   proprietary rights by implementers or users of this specification can
   be obtained from the IETF Secretariat.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to practice
   this standard.  Please address the information to the IETF Executive
   Director.

19 Acknowledgements

   This protocol is the collaborative product of the authors and the
   rest of the DeltaV design team: Boris Bokowski, Bruce Cragun
   (Novell), Jim Doubek (Macromedia), David Durand (INSO), Lisa
   Dusseault (Xythos), Chuck Fay (FileNet), Yaron Goland, Mark Hale
   (Interwoven), Henry Harbury (Merant), James Hunt, Jeff McAffer (OTI),
   Peter Raymond (Merant), Juergen Reuter, Edgar Schwarz (Marconi), Eric
   Sedlar (Oracle), Bradley Sergeant, Greg Stein, and John Vasta
   (Rational).  We would like to acknowledge the foundation laid for us
   by the authors of the WebDAV and HTTP protocols upon which this
   protocol is layered, and the invaluable feedback from the WebDAV and
   DeltaV working groups.






Clemm, et al.               Standards Track                   [Page 109]



RFC 3253            Versioning Extensions to WebDAV           March 2002


20 References

   [ISO639]  ISO, "Code for the representation of names of languages",
             ISO 639:1988, 1998.

   [RFC2026] Bradner, S., "The Internet Standards Process -- Revision
             3", BCP 9, RFC 2026, October 1996.

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2277] Alvestrand, H., "IETF Policy on Character Sets and
             Languages", BCP 18, RFC 2277, January 1998.

   [RFC2279] Yergeau, F., "UTF-8, a transformation format of ISO 10646",
             RFC 2279, January 1998.

   [RFC2396] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform
             Resource Identifiers (URI): Generic Syntax", RFC 2396,
             August 1998.

   [RFC2518] Goland, Y., Whitehead, E., Faizi, A., Carter, S. and D.
             Jensen, "HTTP Extensions for Distributed Authoring -
             WEBDAV", RFC 2518, February 1999.

   [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter,
             L., Leach, P. and T.Berners-Lee, "Hypertext Transfer
             Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC3023] Murata, M., St.Laurent, S. and D. Kohn, "XML Media Types",
             RFC 3023, January 2001.

   [RFC3066] Alvestrand, H., "Tags for the Identification of Languages",
             BCP 47, RFC 3066, January 2001.

















Clemm, et al.               Standards Track                   [Page 110]



RFC 3253            Versioning Extensions to WebDAV           March 2002

Appendix A - Resource Classification

   This document introduces several different kinds of versioning
   resources, such as version-controlled resources, versions, checked-
   out resources, and version history resources.  As clients discover
   resources on a server, they may find it useful to classify those
   resources (for example, to make UI decisions on choice of icon and
   menu options).

   Clients should classify a resource by examining the values of the
   DAV:supported-method-set (see Section 3.1.3) and DAV:supported-live-
   property-set (see Section 3.1.4) properties of that resource.

   The following list shows the supported live properties and methods
   for each kind of versioning resource.  Where an optional feature
   introduces a new kind of versioning resource, that feature is noted
   in parentheses following the name of that kind of versioning
   resource.  If a live property or method is optional for a kind of
   versioning resource, the feature that introduces that live property
   or method is noted in parentheses following the live property or
   method name.

A.1 DeltaV-Compliant Unmapped URL (a URL that identifies no resource)

   Supported methods:

   -  PUT [RFC2616]
   -  MKCOL [RFC2518]
   -  MKACTIVITY (activity)
   -  VERSION-CONTROL (workspace)
   -  MKWORKSPACE (workspace)

A.2 DeltaV-Compliant Resource

   Supported live properties:

   -  DAV:comment
   -  DAV:creator-displayname
   -  DAV:supported-method-set
   -  DAV:supported-live-property-set
   -  DAV:supported-report-set
   -  all properties defined in WebDAV [RFC2518].









Clemm, et al.               Standards Track                   [Page 111]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Supported methods:

   -  REPORT
   -  all methods defined in WebDAV [RFC2518]
   -  all methods defined in HTTP/1.1 [RFC2616].

A.3 DeltaV-Compliant Collection

   Supported live properties:

   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  BASELINE-CONTROL (baseline)
   -  all DeltaV-compliant resource methods.

A.4 Versionable Resource

   Supported live properties:

   -  DAV:workspace (workspace)
   -  DAV:version-controlled-configuration (baseline)
   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  VERSION-CONTROL
   -  all DeltaV-compliant resource methods.

A.5 Version-Controlled Resource

   Supported live properties:

   -  DAV:auto-version
   -  DAV:version-history  (version-history)
   -  DAV:workspace (workspace)
   -  DAV:version-controlled-configuration (baseline)
   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  VERSION-CONTROL
   -  MERGE (merge)
   -  all DeltaV-compliant resource methods.






Clemm, et al.               Standards Track                   [Page 112]



RFC 3253            Versioning Extensions to WebDAV           March 2002


A.6 Version

   Supported live properties:

   -  DAV:predecessor-set
   -  DAV:successor-set
   -  DAV:checkout-set
   -  DAV:version-name
   -  DAV:checkout-fork (in-place-checkout or working resource)
   -  DAV:checkin-fork (in-place-checkout or working resource)
   -  DAV:version-history  (version-history)
   -  DAV:label-name-set (label)
   -  DAV:activity-set (activity)
   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  LABEL (label)
   -  CHECKOUT (working-resource)
   -  all DeltaV-compliant resource methods.

A.7 Checked-In Version-Controlled Resource

   Supported live properties:

   -  DAV:checked-in
   -  all version-controlled resource properties.

   Supported methods:

   -  CHECKOUT (checkout-in-place)
   -  UPDATE (update)
   -  all version-controlled resource methods.

A.8 Checked-Out Resource

   Supported live properties:

   -  DAV:checked-out
   -  DAV:predecessor-set
   -  DAV:checkout-fork (in-place-checkout or working resource)
   -  DAV:checkin-fork (in-place-checkout or working resource)
   -  DAV:merge-set (merge)
   -  DAV:auto-merge-set (merge)
   -  DAV:unreserved (activity)
   -  DAV:activity-set (activity)





Clemm, et al.               Standards Track                   [Page 113]



RFC 3253            Versioning Extensions to WebDAV           March 2002


   Supported methods:

   -  CHECKIN (checkout-in-place or working-resource)
   -  all DeltaV-compliant resource methods.

A.9 Checked-Out Version-Controlled Resource (checkout-in-place)

   Supported live properties:

   -  all version-controlled resource properties.
   -  all checked-out resource properties.

   Supported methods:

   -  UNCHECKOUT
   -  all version-controlled resource methods.
   -  all checked-out resource methods.

A.10 Working Resource (working-resource)

   Supported live properties:

   -  all DeltaV-compliant resource properties
   -  all checked-out resource properties
   -  DAV:auto-update.

   Supported methods:

   -  all checked-out resource methods.

A.11 Version History (version-history)

   Supported live properties:

   -  DAV:version-set
   -  DAV:root-version
   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  all DeltaV-compliant resource methods.










Clemm, et al.               Standards Track                   [Page 114]



RFC 3253            Versioning Extensions to WebDAV           March 2002


A.12 Workspace (workspace)

   Supported live properties:

   -  DAV:workspace-checkout-set
   -  DAV:baseline-controlled-collection-set (baseline)
   -  DAV:current-activity-set (activity)
   -  all DeltaV-compliant collection properties.

   Supported methods:

   -  all DeltaV-compliant collection methods.

A.13 Activity (activity)

   Supported live properties:

   -  DAV:activity-version-set
   -  DAV:activity-checkout-set
   -  DAV:subactivity-set
   -  DAV:current-workspace-set
   -  all DeltaV-compliant resource properties.

   Supported methods:

   -  all DeltaV-compliant resource methods.

A.14 Version-Controlled Collection (version-controlled-collection)

   Supported live properties:

   -  DAV:eclipsed-set
   -  all version-controlled resource properties.

   Supported methods:

   -  all version-controlled resource methods.

A.15 Collection Version (version-controlled-collection)

   Supported live properties:

   -  DAV:version-controlled-binding-set
   -  all version properties.

   Supported methods:

   -  all version methods.



Clemm, et al.               Standards Track                   [Page 115]



RFC 3253            Versioning Extensions to WebDAV           March 2002


A.16 Version-Controlled Configuration (baseline)

   Supported live properties:

   -  DAV:baseline-controlled-collection
   -  all version-controlled resource properties.

   Supported methods:

   -  all version-controlled resource methods.

A.17 Baseline (baseline)

   Supported live properties:

   -  DAV:baseline-collection
   -  DAV:subbaseline-set
   -  all version properties.

   Supported methods:

   -  all version methods.

A.18 Checked-Out Version-Controlled Configuration (baseline)

   Supported live properties:

   -  DAV:subbaseline-set
   -  all version-controlled configuration properties.

   Supported methods:

   -  all version-controlled configuration methods.


















Clemm, et al.               Standards Track                   [Page 116]



RFC 3253            Versioning Extensions to WebDAV           March 2002


Authors' Addresses

   Geoffrey Clemm
   Rational Software
   20 Maguire Road, Lexington, MA 02421

   EMail: geoffrey.clemm@rational.com


   Jim Amsden
   IBM
   3039 Cornwallis, Research Triangle Park, NC 27709

   EMail: jamsden@us.ibm.com


   Tim Ellison
   IBM
   Hursley Park, Winchester, UK S021 2JN

   EMail: tim_ellison@uk.ibm.com


   Christopher Kaler
   Microsoft
   One Microsoft Way, Redmond, WA 90852

   EMail: ckaler@microsoft.com


   Jim Whitehead
   UC Santa Cruz, Dept. of Computer Science
   1156 High Street, Santa Cruz, CA 95064

   EMail: ejw@cse.ucsc.edu
















Clemm, et al.               Standards Track                   [Page 117]



RFC 3253            Versioning Extensions to WebDAV           March 2002


Full Copyright Statement

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Clemm, et al.               Standards Track                   [Page 118]



©2018 Martin Webb