You are here: irt.org | RFCs | RFC2620 [ previous next ]
Network Working Group B. Aboba Request for Comments: 2620 G. Zorn Category: Informational Microsoft June 1999 RADIUS Accounting Client MIB Status of this Memo This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (1999). All Rights Reserved. Abstract This memo defines a set of extensions which instrument RADIUS accounting client functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions IP-based management stations can manage RADIUS accounting clients. 1. Introduction This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing RADIUS accounting clients. Today a wide range of network devices, including routers and NASes, act as RADIUS accounting clients in order to provide accounting services. As a result, the effective management of RADIUS accounting clients is of considerable importance. 2. The SNMP Management Framework The SNMP Management Framework presently consists of five major components: o An overall architecture, described in RFC 2571 [1]. o Mechanisms for describing and naming objects and events for the purpose of management. The first version of this Structure of Management Information (SMI) is called SMIv1 and described in Aboba & Zorn Informational [Page 1]
RFC 2620 RADIUS Accounting Client MIB June 1999 STD 15, RFC 1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. The second version, called SMIv2, is described in STD 58, RFC 2578 [5], RFC 2579 [6] and RFC 2580 [7]. o Message protocols for transferring management information. The first version of the SNMP message protocol is called SNMPv1 and described in STD 15, RFC 1157 [8]. A second version of the SNMP message protocol, which is not an Internet standards track protocol, is called SNMPv2c and described in RFC 1901 [9] and RFC 1906 [10]. The third version of the message protocol is called SNMPv3 and described in RFC 1906 [10], RFC 2572 [11] and RFC 2574 [12]. o Protocol operations for accessing management information. The first set of protocol operations and associated PDU formats is described in STD 15, RFC 1157 [8]. A second set of protocol operations and associated PDU formats is described in RFC 1905 [13]. o A set of fundamental applications described in RFC 2573 [14] and the view-based access control mechanism described in RFC 2575 [15]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI. This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be poduced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB. 3. Overview The RADIUS accounting protocol, described in [16], distinguishes between the client function and the server function. In RADIUS accounting, clients send Accounting-Requests, and servers reply with Accounting-Responses. Typically NAS devices implement the client function, and thus would be expected to implement the RADIUS accounting client MIB, while RADIUS accounting servers implement the server function, and thus would be expected to implement the RADIUS accounting server MIB. Aboba & Zorn Informational [Page 2]
RFC 2620 RADIUS Accounting Client MIB June 1999 However, it is possible for a RADIUS accounting entity to perform both client and server functions. For example, a RADIUS proxy may act as a server to one or more RADIUS accounting clients, while simultaneously acting as an accounting client to one or more accounting servers. In such situations, it is expected that RADIUS entities combining client and server functionality will support both the client and server MIBs. 3.1. Selected objects This MIB module contains two scalars as well as a single table: (1) the RADIUS Accounting Server Table contains one row for each RADIUS server that the client shares a secret with. Each entry in the RADIUS Accounting Server Table includes thirteen columns presenting a view of the activity of the RADIUS client. 4. Definitions RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; radiusAccClientMIB MODULE-IDENTITY LAST-UPDATED "9906110000Z" -- 11 Jun 1999 ORGANIZATION "IETF RADIUS Working Group." CONTACT-INFO " Bernard Aboba Microsoft One Microsoft Way Redmond, WA 98052 US Phone: +1 425 936 6605 EMail: bernarda@microsoft.com" DESCRIPTION "The MIB module for entities implementing the client side of the Remote Access Dialin User Service (RADIUS) accounting protocol." REVISION "9906110000Z" -- 11 Jun 1999 DESCRIPTION "Initial version as published in RFC 2620" ::= { radiusAccounting 2 } Aboba & Zorn Informational [Page 3]
RFC 2620 RADIUS Accounting Client MIB June 1999 radiusMIB OBJECT-IDENTITY STATUS current DESCRIPTION "The OID assigned to RADIUS MIB work by the IANA." ::= { mib-2 67 } radiusAccounting OBJECT IDENTIFIER ::= {radiusMIB 2} radiusAccClientMIBObjects OBJECT IDENTIFIER ::= { radiusAccClientMIB 1 } radiusAccClient OBJECT IDENTIFIER ::= { radiusAccClientMIBObjects 1 } radiusAccClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets received from unknown addresses." ::= { radiusAccClient 1 } radiusAccClientIdentifier OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II." ::= { radiusAccClient 2 } radiusAccServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusAccServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { radiusAccClient 3 } radiusAccServerEntry OBJECT-TYPE SYNTAX RadiusAccServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { radiusAccServerIndex } Aboba & Zorn Informational [Page 4]
RFC 2620 RADIUS Accounting Client MIB June 1999 ::= { radiusAccServerTable 1 } RadiusAccServerEntry ::= SEQUENCE { radiusAccServerIndex Integer32, radiusAccServerAddress IpAddress, radiusAccClientServerPortNumber Integer32, radiusAccClientRoundTripTime TimeTicks, radiusAccClientRequests Counter32, radiusAccClientRetransmissions Counter32, radiusAccClientResponses Counter32, radiusAccClientMalformedResponses Counter32, radiusAccClientBadAuthenticators Counter32, radiusAccClientPendingRequests Gauge32, radiusAccClientTimeouts Counter32, radiusAccClientUnknownTypes Counter32, radiusAccClientPacketsDropped Counter32 } radiusAccServerIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each RADIUS Accounting server with which this client communicates." ::= { radiusAccServerEntry 1 } radiusAccServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry." ::= { radiusAccServerEntry 2 } radiusAccClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server." ::= { radiusAccServerEntry 3 } radiusAccClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks Aboba & Zorn Informational [Page 5]
RFC 2620 RADIUS Accounting Client MIB June 1999 MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." ::= { radiusAccServerEntry 4 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received radiusAccClientRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions." ::= { radiusAccServerEntry 5 } radiusAccClientRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same." ::= { radiusAccServerEntry 6 } radiusAccClientResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets received on the accounting port from this server." ::= { radiusAccServerEntry 7 } radiusAccClientMalformedResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only Aboba & Zorn Informational [Page 6]
RFC 2620 RADIUS Accounting Client MIB June 1999 STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses." ::= { radiusAccServerEntry 8 } radiusAccClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server." ::= { radiusAccServerEntry 9 } radiusAccClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission." ::= { radiusAccServerEntry 10 } radiusAccClientTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout." ::= { radiusAccServerEntry 11 } radiusAccClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 Aboba & Zorn Informational [Page 7]
RFC 2620 RADIUS Accounting Client MIB June 1999 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type which were received from this server on the accounting port." ::= { radiusAccServerEntry 12 } radiusAccClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason." ::= { radiusAccServerEntry 13 } -- conformance information radiusAccClientMIBConformance OBJECT IDENTIFIER ::= { radiusAccClientMIB 2 } radiusAccClientMIBCompliances OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 1 } radiusAccClientMIBGroups OBJECT IDENTIFIER ::= { radiusAccClientMIBConformance 2 } -- compliance statements radiusAccClientMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for accounting clients implementing the RADIUS Accounting Client MIB." MODULE -- this module MANDATORY-GROUPS { radiusAccClientMIBGroup } ::= { radiusAccClientMIBCompliances 1 } -- units of conformance radiusAccClientMIBGroup OBJECT-GROUP OBJECTS { radiusAccClientIdentifier, radiusAccClientInvalidServerAddresses, radiusAccServerAddress, radiusAccClientServerPortNumber, radiusAccClientRoundTripTime, radiusAccClientRequests, Aboba & Zorn Informational [Page 8]
RFC 2620 RADIUS Accounting Client MIB June 1999 radiusAccClientRetransmissions, radiusAccClientResponses, radiusAccClientMalformedResponses, radiusAccClientBadAuthenticators, radiusAccClientPendingRequests, radiusAccClientTimeouts, radiusAccClientUnknownTypes, radiusAccClientPacketsDropped } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { radiusAccClientMIBGroups 1 } END 5. References [1] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing SNMP Management Frameworks", RFC 2571, April 1999. [2] Rose, M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based Internets", STD 16, RFC 1155, May 1990. [3] Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD 16, RFC 1212, March 1991. [4] Rose, M., "A Convention for Defining Traps for use with the SNMP", RFC 1215, Performance Systems International, March 1991. [5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [8] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", STD 15, RFC 1157, May 1990. Aboba & Zorn Informational [Page 9]
RFC 2620 RADIUS Accounting Client MIB June 1999 [9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Introduction to Community-based SNMPv2", RFC 1901, January 1996. [10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996. [11] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)", RFC 2572, April 1999. [12] Blumenthal, U., and B. Wijnen, "User-based Security Model for Version 3 of the Simple Network Management Protocol (SNMPv3)", RFC 2574, April 1999. [13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [14] Levi, D., Meyer, P., and B. Stewart, "SNMP Applications", RFC 2573, April 1999. [15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access Control Model for the Simple Network Management Protocol (SNMP)", RFC 2575, April 1999. [16] Rigney, C., "RADIUS Accounting", RFC 2139, April 1997. 6. Security Considerations There are no management objects defined in this MIB that have a MAX- ACCESS clause of read-write and/or read-create. So, if this MIB is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB via direct SNMP SET opertions. There are a number of managed objects in this MIB that may contain sensitive information. These are: Aboba & Zorn Informational [Page 10]
RFC 2620 RADIUS Accounting Client MIB June 1999 radiusAccServerAddress This can be used to determine the address of the RADIUS accounting server with which the client is communicating. This information could be useful in mounting an attack on the acounting server, which may contain sensitive financial data. radiusAccClientServerPortNumber This can be used to determine the port number on which the RADIUS accounting client is sending. This information could be useful in impersonating the client in order to send fraudulent data to the accounting server. It is thus important to control even GET access to these objects and possibly to even encrypt the values of these object when sending them over the network via SNMP. Not all versions of SNMP provide features for such a secure environment. SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB. It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [12] and the View-based Access Control Model RFC 2575 [15] is recommended. Using these security features, customer/users can give access to the objects only to those principals (users) that have legitimate rights to GET or SET (change/create/delete) them. 7. Acknowledgments The authors acknowledge the contributions of the RADIUS Working Group in the development of this MIB. Thanks to Narendra Gidwani of Microsoft, Allan C. Rubens of MERIT, Carl Rigney of Livingston and Peter Heitman of American Internet Corporation for useful discussions of this problem space. Aboba & Zorn Informational [Page 11]
RFC 2620 RADIUS Accounting Client MIB June 1999 8. Authors' Addresses Bernard Aboba Microsoft Corporation One Microsoft Way Redmond, WA 98052 Phone: 425-936-6605 EMail: bernarda@microsoft.com Glen Zorn Microsoft Corporation One Microsoft Way Redmond, WA 98052 Phone: 425-703-1559 EMail: glennz@microsoft.com Aboba & Zorn Informational [Page 12]
RFC 2620 RADIUS Accounting Client MIB June 1999 9. Full Copyright Statement Copyright (C) The Internet Society (1999). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implmentation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Aboba & Zorn Informational [Page 13]